New Material Handling & Storage Products

Dispensers meter and mix small shots.

Series I&J10 dispenses 0.012 to 5 cc of mixed material with accuracy of 1% using Dead-Stop feature to ensure repeatability. It can be robot mounted (I&J10R) and supplied with stepping-motor drive (I&J10RS) to avoid pneumatic stroke delays and to enable variation of dispense rate. Portable bench mounted model (I&J10B) utilizes small bench area; reservoirs mount directly on system. Model I&J10F...

Intermediate Bulk Container handles hazardous waste solids.

Able to stack four units high, cubic yard FIBC has 35 in. square base and 36 in. height. Design is approved for UN packaging Groups II and III and features full-open duffle top with flat bottom and 3-mil LLDPE liner. Fabric is 6.5 oz. polypropylene, and capacities range to 2,205 lbs with 6:1 safety factor (2,645 lbs with 5:1 factor). FIBC can be used with over-the-road, rail, and sea transport...

Cart allows batch picking of low-velocity SKUs.

EASYpickÃ-® GoKart(TM), with pick-to-light technology, enables operators to pick several orders simultaneously during one pass. With readable interface, self-contained unit can be hand driven or motorized. It uses wireless local area network (LAN) and short-range RF scanners. Constructed with chrome-plated steel frames, augmented by stainless steel hardware, cart can be manufactured up to 66...

Workholding Grippers are available in metric sizes.

Counterbored workholding serrated grippers are available in metric sizes from 12 to 24 mm (round and square) as well as in sizes from Ã-½ to 1 in. (square and round). Grippers, offered with coarse, fine, and extra fine tooth patters, are made of tool steel, heat treated to Rc62. They mount utilizing socket head cap screw from serrated-face side and provide holding power with minimum wear on...

Guide to Replacement Fuel Tanks

What to consider when your fuel tank needs to be replaced.

Die Change Package expedites stamping press changeover.

Lif-T-Rol die lifters raise die subplates and roll them out of or into press. Package includes manually operated air/hydraulic pump and operating valves, manifold kit, pressure switch and gauge, mounting hardware and die locating blocks. It is designed for bolster sizes from 18 x 36 in. to 36 x 60 in., handling die weights from 1 to 6 tons. Removable and swivel-type bolster extensions are...

Adhesive Applicator provides hot-melt bonding.

PowerLineÃ-® applicator, with 6.8 oz melting tank and quick-heating chamber, melts various adhesive types in less than 6 min. Compressed air from 21.8 to 87.0 psi delivers adhesive at controlled, sustainable rate. LED digital control panel, located at base of handle, controls adhesive temperature and power functions. Integrated temperature adjustment function automatically reduces adhesive...

Conveyors offer economical solutions for small part transfer.

Designed for the automation of small part transfer and load/unload applications, CSSK-50 series of conveyors have standard belt lengths between pulleys of 500 to 4,000 mm and belt widths between 40 and 500 mm. Knife-edge designs, adjustable inclines, 90Ã-

Diesel Scissor Lift incorporates 23 ft long Supa-Deck.

With 37 ft working height, Model LX31 provides over 23 feet of internal deck length via twin deck extensions. It facilitates handling and installation of cladding sheets and other construction materials such as glazing, curtain walling, H and V ducts, and steelwork. With 131.3 ftÃ-² platform workspace and load capacity rated at 1,764 lbs, model LX31 with Supa-Deck accommodates operatives and...

Manipulator lifts and handles large suitcases and boxes.

Mini-Articularm is mounted on 12 x 12 in. base plate. It swings in 12 ft diameter circle, and forearm can articulate in every part of circle to pick up or place items. Vertical mast rotates 360Ã-

Collapsible Containers offer various storage options.

Available with 0, 1, or 2 hinged drop doors and 4-way forklift access, ROPAK(TM) 4548 reusable containers have 45 x 48 in. footprints and are available in 7 heights from 25 to 50 in. Maximum load capacities range from 1,200 to 2,000 lbs with return ratios of 1.4:1 to 2.6:1. Available 45 x 48 x 33 in. dunnage model offers load capacity to 1,200 lbs and return ratio of 1.6:1. When collapsed,...

High or Low Volume Custom Crates and Boxes Available from Reid Packaging

Reid provides mil-spec crates and corrugated boxes in custom dimensions from single to triple wall and will even package them on-site. Check out the video to learn more.