New PL40 Penetrating Lubricant Offers Protection against Metal Oxidation
PL40 Penetrating Lubricant is suitable for frozen moving parts such as hinges, joints and solenoids. The lubricant reduces friction between mechanical parts and is safe to use around plastic. Product removes moisture and inhibits corrosion on electronic and electrical components.
Read More »
New BELSIL® Eco Silicone Fluids Use Certified Biomethanol Made from Plant Residue
WACKER’s BELSIL® eco Silicone Fluids offer viscosity ranging from 5 and 60,000 centistokes. The fluids are used in formulation of moisturizing creams, lotions, sunscreens, shampoos and conditioners. BELSIL® eco fluids are linear unmodified polydimethylsiloxanes that feature low surface tension.
Read More »
PolySi® G-MAN® Metalworking Fluids eliminate the growth of bacteria.
PolySi®'s G-MAN® Metalworking Fluid line consists of blend of additives such as extreme pressure, anti-wear, and corrosion inhibitors. Additives are used in applications such as metal removal or metal forming. These fluids are offered in synthetics, semi-synthetics, oils and cleaners that are used customized for specific applications. Units are DCHA free and can be blended without using boron...
Read More »
Which P-80
What is P-80®? P-80® is a line of temporary rubber assembly lubricants designed to decrease the installation force needed to install rubber parts, enabling them to slide easily into place. P-80 lubricants are water-based and do not contain alcohol or petroleum distillates, so they will not cause rubber to swell, dry out or harden. P-80 does not contain silicon or other persistent ingredients,...
Read More »
Johnny Dean Uses Magnalube-G
Briefing about the constant breakdowns of trailer hubs, trucks, and boats due to high temperatures, excessive braking, and salt water infiltration, this paper describes how Mr. Johnny Dean benefitted by using PTFE based Magnalube-G. Magnalube-G's performance in high temperature is highlighted, and how the reduction of wear and tear of the parts which are constantly exposed to dirt and humidity is explained. The reduced penetration of salt water into the exposed parts is also reported. The paper concludes with Mr Dean's comment on frequency of using Magnalube-G for better performance in offshore boats, farm equipment, saltwater reels, and any equipment which has a grease fitting.
Read More »
XL Synthetic Motor Oil meets GM dexos1
XL Synthetic Motor Oil is used to protect engine parts such as pistons and connecting rods. Unit is available in viscosities such as 0W-20, 5W-20, 5W-30, 10W-30 and 10W-40. This API licensed product offers protection of engine parts up to 12,000 miles or one year. Motor oil is formulated with friction modifiers.
Read More »
Go Easy with P-80 for Appliance Assembly
Dishwashers, washers and dryers, refrigerators, mixers, blenders, and many other appliances are composed of numerous rubber and soft plastic parts. Hoses, O-rings, seals, grommets, plugs, belts and valves are just some of the many parts that can be found in common household appliances. Rubber’s slip resistant nature can make appliance assembly difficult. Using a temporary rubber lubricant...
Read More »
What is the Dry Time of P-80®? (And, Why it Matters)
What is the dry time of P-80®? (And, why it matters) Why does dry time matter? P-80® lubricants are temporary assembly lubricants. When P-80 is wet it provides the needed lubrication to reduce the friction of rubber parts during assembly. Once P-80 dries the lubrication ceases and parts stay in place. Some assembly applications may benefit from using a quick-drying lubricant. This is often the...
Read More »
The Best Solution for Easy Automotive Rubber Assembly
There are an amazing number of rubber parts in a single automobile. It can be mindboggling to think of the various rubber components that are involved in the assembly of a car. O-rings, bushings, seals, hoses, engine mounts, belts, gaskets…any number of chassis, engine and suspension components are made of rubber or plastic. Rubber is naturally slip resistant, making it difficult to work with...
Read More »
Milacron's CIMCOOL® Fluid Technology Introduces a Line of MILPRO® Process Oils
CINCINNATI - Milacron Holdings Corp. (NYSE: MCRN), a leading industrial technology company serving the plastics processing and metalworking industries, announces that its CIMCOOL® brand, a leader in industrial fluid technologies, releases a new series of MILPRO® Process oils, formulated for slide-way, hydraulic, and gear oil applications. Bruce Koehler, Sr. Product Manager, CIMCOOL Fluid...
Read More »Showcasing Steel Process Fluid Solutions and Technical Expertise at AISTech 2017
Quaker Chemical Highlights QUINTOLUBRIC® 702-46 RD and QUAKERTEK™ BGG CONSHOHOCKEN, Pa., May 2, 2017 - Steel mills face complex challenges in manufacturing where process fluids can optimize operations. Quaker Chemical Corporation (NYSE:KWR, "Quaker"), a longstanding supplier of steel fluids, offers integrated process solutions ranging from cleaners, rolling oils, corrosion preventives, temper...
Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.
Read More »
