Boutique Hotel at Avalon and Alpharetta Conference Center Completed with AGC Glass ENERGY Select® 28
272,000 square feet of hospitality and event space features high-performance, low-e coated glass Alpharetta, GA. May 20, 2019 — Approximately 45,000 square feet of AGC Glass North America’s ENERGY Select® 28 high-performance, low-e coated glass completes the Hotel Avalon and Alpharetta Conference Center in Alpharetta, GA. “AGC ENERGY Select provided the right color range we needed, the...
Read More »
DUNAPOL® C Pour-In-Place Polyurethane Insulation Implemented at Major LNG Projects
Pourable System Offers Process Efficiency Improvement Over Legacy Insulation Techniques BAYTOWN, TEXAS (PRWEB) MAY 17, 2019 DUNA-USA, a manufacturer of polyurethane and polyisocyanurate foams and chemicals for the aerospace, automotive, insulation, marine, and construction industries, has partnered with Insulations Inc. an oil and gas industry insulation contractor, to provide DUNAPOL® C...
Read More »
Fujipoly Releases Sarcon PG80A Thermal Interface Material for Applications Requiring Material Compression Between 30 and 90 Percent
Available in 0.5, 1.0, 1.5 and 2.0 mm sheet thicknesses up to maximum dimension of 300 x 200 mm. Exhibits a thermal resistance of 0.08°C.in²/W at 14.5 PSI and a thermal conductivity of 13 W/m°K. Suitable for applications with operating temperature ranging from -40 to +150°C.
Read More »
Monprene OM compounds Exhibit Improved Bond Strength when Overmolded Onto Rigid Polymers
Monprene OM-19300 are designed for adhesion to general-purpose and high-impact polystyrene. Monprene OM-19400 general-purpose series ranges in hardness from 40 to 70 Shore A and overmolded onto a range of thermoplastic substrates. Monprene OM-19100 and Monprene OM-19100V series consists of low compression set compounds designed for overmolding onto nylon.
Read More »
Cold Forming: A Cost Effective Alternative to Machining Small Parts
Cold forming offers tight tolerances, dimensional stability, and advanced surface finishes, while also saving you in raw material wastes costs.
Read More »
Michelman Highlights an Extensive Line of Topical Wood Treatment Additives at Eastern Coatings Show
CINCINNATI, OH (May 15, 2019) – Michelman is excited to showcase their proprietary and low VOC Michem® Wood Coating line of wood treatment additives to Eastern Coatings Show attendees May 13-15, 2019. Their family of Michem® Wood Coating solutions raises the water resistance standard for waterborne deck stains and sealants. All of Michelman’s solutions pass the ASTM D-4446 standard for...
Read More »
Sappi North America Releases Ultracast Paper Textures for Laminate Applications
Available in Selva, Optima, Magma, Fiesta, Urban and Canyon textures. Suitable for worktops, kitchen, counters and cabinets, flooring and wall paneling applications. The optima texture changes ceramic, stone and metal designs into captivating surfaces.
Read More »
New +Restore Additive Includes Typical Usage Rates in Range from 0.1 to 0.5%
Processors can use the +Restore additive to improve the physical properties of virgin materials. Enables recyclers to obtain physical properties much closer to those of virgin polymer than with unmodified regrind. Used alone or in a blend with Riverdale Global’s liquid colors.
Read More »
New SumikaSuper LCP Grades Provide Pitch Spacing Ranging from 0.2 to 0.3 mm
Available in SZ6505HF and SR2506 grades that provides increased flow for parts with thicknesses at or above 0.10 mm and at or below 0.08 mm respectively. Suitable for use in electrical and electronic components such as fiberoptic cables, PCBs, chip carriers, automotive applications and MEMS. Feature ordered and linear natured molecular chains that provide self-reinforced properties in the flow...
Read More »
New DUN-JET UV Inkjet Films Provides Strong Print Adhesion and Good Print Quality on UV Inkjet Printers
Products include clear, white, and metallized PET film along with white BOPP film. Ideal for labels, packaging and other graphics applications.
Read More »
New LAST-A-FOAM FR-4800 Withstands Peak Temperatures up to 480 degree F
Thermally-stable tooling board can be used with high-temperature resin systems. Ideal for use in the production of high-tolerance complex shapes and parts due to its predictable and repeatable CTE. LAST-A-FOAM® FR-3800 FST polyurethane foam core satisfies fire, smoke and toxicity (FST) requirements.
Read More »
Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions
Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.
Read More »
