Cable Clamps

Ethernet Cable Clamp Tester™
Cable Clamps

Ethernet Cable Clamp Tester™

Ensure the quality of your cable with ETS Ethernet Cable Clamps... The ETS Ethernet Cable Clamp Testers (CC-101/102/109) allow for the injecting of a common mode current into CAT5e, CAT6A and CAT7 cables in order to test gigabit Ethernet for the common mode noise. The CC-101 and CC-102 have (6) thumb-bolts allowing the release of the unit halves for cable insertion for testing purposes. The...

Read More »
Shield Clamping Saddles are optimized for usability.
Cable Clamps

Shield Clamping Saddles are optimized for usability.

Available in 3 variants for 3–20 mm dia shields, ergonomic 790 Series comes with facilitated latching mechanism. Force-free installation is enabled viaÂ- one spring that can be latched open while positioned over conductor and busbar and released on conductor shield. While dual marking locations accommodate WMB marker and multi-line continuous marking strip, recessed grips...

Read More »
PIRTEK Offers a Whip Check System as a Safety Measure for Equipment Operators
Cable Clamps

PIRTEK Offers a Whip Check System as a Safety Measure for Equipment Operators

Safety is always the primary concern when operating hydraulic equipment and machinery. If an end fitting becomes disconnected from a high pressure hose the release of energy contained inside can cause serious injury to anyone operating or working on the equipment. The Whip Check System offered by PIRTEK is a retention system designed to restrain the hose from the Whipping Effect" created by the...

Read More »
Ground Clamps are designed to meet electrical industry demands.
Cable Clamps

Ground Clamps are designed to meet electrical industry demands.

Accommodating electrical industry needs, UL-Listed andÂ- CSA-Certified Type GPL U-Bolt Ground Clamps are available for pipe, rod, rebar, and fence posts. Spacer is designed to optimize available positive contact area, and clamps rotate 90° for installation flexibility. Products are suitable for direct burial in earth or concrete.

Read More »
NTE Expands Cable Tie and Bundle Management Product Line
Cable Clamps

NTE Expands Cable Tie and Bundle Management Product Line

Bloomfield, NJÂ- – NTE Electronics, Inc. has expanded its cable tie product line to include many more cable tie and bundle management products!  Adding to the already comprehensive line, NTE's latest additions make it a complete one-stop shopping for all of your cable tie, bundle management and accessory needs. From traditional nylon ties and reusable hook and loop ties to...

Read More »
Stainless Steel Cable Clamps resist corrosion.
Cable Clamps

Stainless Steel Cable Clamps resist corrosion.

Designed to clamp cable or tubing securely into place, Heyco® Stainless Steel Cable Clamps come in standard corrosion-resistant 304 SS and insulated LDPE-coated 304 SS. Both have smooth coined clamp edges to prevent damage to cable insulation, and are designed for .203 in. mounting hold diameters. LDPE clamp, featuringÂ- FDA food contact approval, is coated with polyolefin, which is...

Read More »
Platinum Tools Adds New Bridle Rings and Beam Clamps for Cable Management
Cable Clamps

Platinum Tools Adds New Bridle Rings and Beam Clamps for Cable Management

Now Shipping, New Bridle Rings and Beam Clamps Offer an Efficient, Secure, and Cost Effective Solution for Low-Voltage Installations CAMARILLO, Calif. – Platinum Tools® (www.platinumtools.com), the leader in solutions for the preparation, installation and hand termination of wire and cable, is proud to announce that it has added five new Threaded Screw Bridle Rings (p/n JH802 though...

Read More »
One-Piece Clamp and Back Strap secures cable or conduit.
Cable Clamps

One-Piece Clamp and Back Strap secures cable or conduit.

Available in ½–¾ in. (UCS-5075) and ¾–1 in. (UCS-75100) designs, Mighty-HOLD® Universal Clamp Strap meets NEC requirements and is cULus Listed. While UCS-5075 secures ½ and ¾ in. EMT, Rigid, IMC, Liquid Tight Metallic and Non-Metallic, FMC, and Schedule 40 and 80 PVC conduit, as well as .710–1.10 in. ∅ steel and aluminum AC/MC cable, UCS-75100 secures same conduit types...

Read More »
Cable Clamps

Earth Resistance Testers have clamps with eliptical apertures.

With clamps that accommodateÂ- up to 39 mm diameter cables and up to 50 mm wide flat earth tapes, DET14C and DET24C accurately measure earth resistance in multiple loop systems without breaking earth connections. Products feature CATIV 600 V safety rating and can measure ground resistance over 50 mΩ to 1,500 Ω range and true RMS ground leakage current from 0.2 mA to 35 A. Model...

Read More »
IP68 Cordgrips provide liquid-tight strain relief protection.
Cable Clamps

IP68 Cordgrips provide liquid-tight strain relief protection.

Heyco®-Tite Hybrid Liquid Tight Cordgrips enable different diameters of cable to be inserted in same gland. Moveable and segmented nylon fingers provide large clamping and sealing areas and compress around gland and wire when tightened using Cordgrip's compression nut to provide torsion-proof seal. Nickel-plated brass enclosure provides corrosion resistance and durability, while molded TPE...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics