Maxi-Lift Adds Continental to Belting Line
Pathfinder Plus Belting Available Direct from Maxi-Lift Addison Texas, August 1, 2018 | Maxi-Lift is pleased to announce a new agreement with Continental to stock their flagship agricultural conveyor belt line, Pathfinder Plus. Maxi-Lift will add this premium product to our inventory during the summer of 2018. Maxi-Lift will custom slit and punch this belt, on site, in a 42,000 square foot belt...
Read More »
New Pressure-Sensitive Safety Mats Come in Single-Piece Molded Construction
Rockford Pressure-Sensitive Safety Mats are designed to detect presence of worker, vehicles or production materials. The units are resistant to wear, oils, grease and acids and are suitable for use industrial environments such as robotic welding, water jets, tube tenders, conveyors and CNCs. The mat’s top surface features rib pattern running parallel with mat length that prevent slipping. The...
Read More »
New C95900 Aluminum Bronze Series of Products Features High Hardness and Strength
National Bronze Mfg. Co. introduces a series of C95900 aluminum bronze products that include wear plates, bearings, wiping blocks, cam followers and gibs. The C95900 alloy contains 12 to 13.5% aluminum content that provides hardness around 286 BHN or Rockwell 29C to the products. It is ideal for heavier load applications under abrasive conditions.
Read More »
Recessed Outdoor Wall Outlet Enclosure from TayMac
South Bend, Indiana April 24, 2018 - TayMac is proud to market the MR420 series of recessed outdoor wall outlet covers. The line of non-metallic covers is designed for use with all common siding types and materials. TayMac, part of Hubbell Commercial Construction, provides innovative electrical products to industrial, commercial and residential markets. The TayMac MR420 recessed outlet cover...
Read More »
Conveyors Buying Guide
We've all seen conveyors, whether in airports or in large warehouses. Whatever the use, products need to get from point A to point B with minimal human intervention. Learn about the different types of conveyors in this buying guide.
Read More »
Conta-Clip's New KDS-FP Flange Plate Offers IP66 Ingress Protection
Conta-Clip’s KDS-FP Flange Plate are available in KDS-FP-2x10/24 and KDS-FP-3 x 10/24 models with up to 20 or 30 configurable frame openings respectively. Consisting of 40 x 110 mm duct that is segmented into up to ten frame openings by snapping frame inlays, the inlays are offered in plain partitions, T-pieces or cross and double cross form.
Read More »
New GN 187.4 Stainless Steel Locking Plates are Compliant to RoHS standards.
GN 187.4 Stainless Steel Serrated Locking Plates are adaptable to range of applications. The units are made of different standard steel such as locking plates (American Standard Series 316L), guide housing (AISI 303) and conical thrust springs (AISI 301). The units enable interlocking of standards components at define angle.
Read More »
New Radial Loc-N-Load™ Fixture Plate Uses CMM Palletization Features
Radial Loc-N-Load™ Aluminum Fixture Plate is available in 12, 18 or 30 in. rail and plate combinations with 8 in. diameter and 1/2 in. thick black hard anodized aluminum with 1/4-20 threaded holes. The plate comes with laser marked rings for simplifying process of aligning parts. Unit interlocks magnetically and can be installed on all CMMS. The fixture plate allows creation of multiple...
Read More »
Handheld Thread Verification And Chasing
Why New Vista’s TG Guns are Replacing Manual Gaging and Hand Chasing New Vista is well known for its large offering of automated thread verification and chasing equipment. But not every application requires an automated solution. If your volume is limited, a powered handheld device may be the answer. If you are still gaging or chasing threads manually, it’s probably for one or more of these...
Read More »
Magnetic Suction Cup Mounting Plate comes with windload.
MMP-4XSCM-24X8 Suction Cup Mounting Plate is engineered from high strength composite and powder coated marine grade aluminum and a plate made from powder coated steel. Plate can be used on lights up to 20 lb. such as spotlights, flood lights, strobe lights, beacons, warning lights, signal lights and flashers. Product is suitable hunting, fishing, farming operations and off-roading applications...
Read More »
Conduit Caps allow rerouting of conduits.
Gibson’s Conduit Caps are available in Type 316 stainless steel in sizes ranging from ½ in. to 4 in. Featuring hexagonal flats for easy tightening, units come with NPT threads. Caps enables for expansion or rerouting.
Read More »
Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »
