New Modular Subrack/Enclosure Configurations Facilitate the Mix of 6U and 3U Boards
Pixus’ Modular Subrack/Enclosure Configurations enable the use of dual 3U segments in a same enclosure. The designs are available in OpenVPX, CompactPCI, and custom backplane architectures. Units can be stacked one above the other 3U boards. The enclosures are used in applications such as communications, mil/aero, medical, transportation and research/physics.
Read More »
New Short-Open-Load-Through Calibration Kits are Compact and Lightweight
New 4-in-1 Short-Open-Load-Through Calibration Kits are available in PE5CK1013 and PE5CK1012 two models. Units come with gold-plated 3.5 mm connectors and a handy lanyard. Products have a calibration capability of 26.5 GHz. The SOLT kits are designed for field testing, antenna measurement and cable verification applications. Units feature an impedance level of 50Ω, phase deviation of ±2...
Read More »
New Red Rubber Meter Flange Kits are Made from Lead Free Rubber
Red Rubber Double Meter Flange Kit consist of 2 flanges, 2 full face gaskets, 4 nuts and 4 bolts that are made of 304 stainless steel. The flanges are made of bronze with gaskets of 1-1/2 in. and 2 in. sizes.
Read More »
New xCase for iPad Pro Meets MIL-STD-810G Ruggedness Testing
MobileDemand’s xCase for iPad Pro® 10.5 in. model come with rubber corner bumpers, port covers and secure grasp. Unit’s patented snap mount plate system helps in attaching iPad to cars, trucks, and forklifts. Unit withstands up to 26 drops from four feet and features briefcase handle and a backhand strap for effortless carrying and holding the tablet. The case allows mounting of tablet to...
Read More »
Commercial Kitchen Ventilation Systems
If you can't stand the heat, don't get out of the kitchen! Download this white paper and see how you can improve your commercial kitchen ventilation system.
Read More »
OKW Launches New CARRYTEC Enclosures with Side Bags for Instruments, Sensors and Cable Attachments
OKW Launches New CARRYTEC Enclosures are available from 8.74 x 8.07 x 3.14 in. to 13.70 x 11.92 x 4.60 in. dimensions. CARRYTEC enclosures are suitable for applications such as communications, data recording, agriculture and forest management. Unit’s bags are offered in sizes of S (3.22 x 7.08 x 2.56 in.) and M (3.89 x 8.42 x 2.52 in.). The bags feature tough integrated handle and are molded...
Read More »
Latest PSB Series LED Drivers Come with Integrated Bluetooth Mesh Communications
PSB Series LED Drivers are offered in 30W/40W/50W models and feature aluminum housing with side lead, bottom lead or European terminal block configurations. The Bluetooth mesh communication makes dimming, scheduling and ambient scene control easier. Unit’s come with Tri-Mode Dimming™ feature that provides TRIAC, ELV and 0-10 V support. PSB Series drivers deliver an accuracy of 90% from...
Read More »
New VGM Series Drivers Come in IP66-Rated Aluminum Housing
ERP’s VGM Series Drivers are offered in 60W/12V and 100W/24V models and deliver an efficiency of 90% at 50-100% of load with power factor greater than 0.9 and THD less than 20%. Units come with 6 kV surge protection and offer a life of 50,000 hours at Tc=90°C. VGM drivers enable LED signage manufacturers to meet standards of ENERGY STAR®, California Title 24 and the DesignLights Consortium...
Read More »
New Cyrel EASY BRITE Screens Reduce Mottle and Graininess on Inks
DuPont’s Cyrel® EASY BRITE Screens optimize ink laydown in high-volume printing of white undercoat or solid areas with spot colors. The screens when combined with Cyrel® EASY Plates deliver consistent print of large solid areas, uniform ink layer, improved opacity and eliminates trail edge void. Cyrel® EASY BRITE Screens are suitable for solid printing at volumes greater than 4.0 bcm.
Read More »
New Volvo FE Electric Trucks Come with 27 tonnes GVW (Gross Vehicle Weight)
Volvo FE Electric Trucks are equipped with two electric motors offering continuous power of 260 kW with a two speed transmission, max torque of electric motor is 850 Nm and the rear axle is 28 kNm. Truck is offered with lithium-ion batteries with a capacity of 200–300 kWh. Having a range of up to 200 km, the FE truck is suitable for distribution and refuse collection applications in urban...
Read More »
New AU200-50x50-SC Alignment Stage Features Precision Pattern of Drilled and Threaded Mounting Holes
AU200-50x50-SC Alignment Stage with high resolution and high repeatability is suitable for alignment, assembly, laser drilling, machining, medical, scanning, and optical applications. Unit provides a linear travel of 50 x 50 mm (X and Y axes) with a resolution of 5 microns for each axis. The stage comes with 1 mm per-turn lead screws and preloaded V-groove and crossed roller bearings. Unit is...
Read More »
Precision Machined Parts for High Tech Applications
For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.
Read More »
