New Linear Guide Rails with Cam Roller Carriages
Available guide rail heights of 1.18 in (30 mm) and 1.77 in (45 mm). Can be mounted using the typical bore pattern, even up to a rail length of 97.64 in (2480 mm). Used in corrosive environments as well as areas with strict hygiene requirements.
Read More »
DM01 Linear Guides Featuring Higher Bending Stiffness
LinMot will complement the product group of linear guides with the newly designed DM01 series starting in 2020. This is a complete drive solution consisting of a linear guide and permanently integrated LinMot stators. Depending on the requirements in terms of stroke length and power requirement, LinMot offers more than 20 variants within the DM01 product family. This gives the user a wide range...
Read More »
New Linear Guide Comes with Self-Aligning Capabilities
Features double-row ball bearings for greater load capacity in both radial and axial directions. Can compensate for misalignment errors on two planes: axial up to 3.5 mm. and radial up to ±1.3°. Designed for demanding applications such as those involving higher loads, high speeds, fast accelerations or harsh, dirty operating environments.
Read More »
New LM Guide Suitable for Robot Transfer Devices and Laser Cutters
Type FHS can be installed in horizontal, vertical, inverted and wall-mounted orientations. Available in four sizes with LM rail widths ranging from 34 to 63mm in standard or long block types. Constructed with components designed to provide stability during high rates of speed.
Read More »
Everything You Need to Know About E-Textiles
This ebook provides an in-depth overview into everything you need to know about E-Textiles.
Read More »
New Type RSX-M and RSX-WM Miniature LM Guide Features Optimized Circulation Structure
Features include built-in retaining wire that prevents balls from falling out and a groove contact structure that receives loads in all 4 directions. Offers customization of surface treatment, metal circulation parts, block length, effective stroke type and more. Available with a long overall LM block length, wide width and highe rated load and permissible moment.
Read More »
New Heavy-duty Drill Guide Hold Workpieces up to 3 x 3 in. for Precise Drilling
Offers more than 8 in spindle travel for deep drilling and large pass-through opening in the sturdy base allows drilling workpieces of virtually any length. Features a stop for setting drilling depth for repeat applications and V-shaped supports in the base that center dowels and other round stock under the bit. Drill guide's chuck features a 1/4 hex shank at the other end that fits any handheld...
Read More »
New SPR/SPS Caged Ball LM Guide Features THK Caged Technology
Includes additional raceway grooves, ultra-long blocks and an increased number of small-diameter balls. Improves the precision of load-bearing strokes and provides stable motion. Reduces load on the balls by 50% and enables ultra-low waving on a nanoscopic scale.
Read More »
New Type SHS-LE LM Guide from THK is Ideal for Compact Machine Designs
Each row of balls is arranged at a contact angle of 45° and enables SHS to be used in all directions. Features patented THK Caged Technology that employs synthetic resin cage with a curvature that cradles each ball and separates it from the next. Offers increased speed and accuracy, decreased noise levels, low dust generation and long life.
Read More »
New Linear Actuators and Guides Suitable for Harsh and Debris-laden Environments
LoPro® linear actuators excel in high speed, long length and dirty environments. UtiliTrak® is constructed with DualVee Motion Technology® in vee and vee/crown designs.
Read More »New Cable Guide System's Self-tensioning Technology Maintains The Mesh and Cable Tautness Even in Changing Outdoor Temperatures, Wind or Moisture
System can fit a variety of sizing configurations between 25 feet wide by 11 feet high or 20 feet high by 9 feet wide. Keeps the screen in place while the new self-tensioning technology maintains the product’s fit regardless of changing temperatures, wind and moisture conditions. Retracts screens vertically out of sight when not in use to maintain curb appeal and improve building aesthetics.
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
