New VTX995 Rackmount Chassis Provides 400W Universal AC Power Supply
Supports up to two conduction cooled 6U VPX modules. Accepts both front and Rear Transition Modules (RTM) for conduction cooled modules. Offers CPU that will monitor and maintain the temperature at the VPX module wedge.
Read More »
New ATR Chassis Accommodate Intense Thermal Management
Features eight 6U slots on a 1.2 in. pitch, two VITA 62-compliant power supply slots, four 6U slots and two 6U payload slots. Designed for data rates up to 10 Gbps and can handle 300 Watts per slot. Offers 1 ATR tall short with rugged, bolted construction.
Read More »
New Rackmount Chassis from Pixus Meets MIL-STD-810 and MIL-STD-461 Standards
Supports 80 mm. Rear Transition Module (RTM) space on the back side of the backplane and customized versions for longer RTMs. Comes with special card guide trays and deeper card cages . Ideal for longer OpenVPX modules.
Read More »
New VTX955 VPX Chassis Provides JTAG Master Capability
Chassis has left to right push/pull cooling to the VPX payload and RTM slots. Accept 0.8-inch, 0.85-inch and 1.0-inch pitch modules and is ideal for commercial deployment. Provides 500W AC universal input power supply that supports 90W AC per slot.
Read More »
CMAA Crane Buyer's Guide
CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.
Read More »
New 2U High Rackmount MicroTCA Chassis Features 1 MCH (MicroTCA Carrier Hub) Slot and 7 AdvancedMCs (AMCs) Standard
Backplane supports 40GbE and PCIe Gen3 speed signals. Chassis platform has the card cage recessed within the enclosure, providing protection for the AMCs and cabling. Left side of the card cage is raised to allow for cabling to be channeled to the rear of the enclosure.
Read More »
EndRun Introuduces e-Series Distribution Chassis with Network Time Protocol Client/Server
Provides high integrity signals to mission critical systems such as communications, broadcast transmitters, military test ranges and production test. Features a web interface for monitoring input and output port status, alarms and configuration. Available with SNMP v1, v2c, v3 with alarm traps and offers dual input - 10 output time and frequency distribution with auto-switching.
Read More »
VadaTech Introduces VT954 1U MTCA Chassis for Mil/Aero Applications
Equipped with provisions for rails for rackmount environments and 3rd generation MCH for front-to-rear cooling. Offered in aluminum chassis construction that provides 6 single module mid-size AMC slots. Features dual 10/40GbE, dual GbE and dual QSFP+ to the front panel and the backplane offer direct connection between adjacent AMC slots on ports 2-3 and on ports 12-20.
Read More »
Pixus Technologies Now Offers 5-Slot OpenVPX Rackmount Chassis for High-Power Development Applications
The RiCool Rackmount Chassis comes with a 5-slot OpenVPX backplane to BKP3-DIS05- 15.2.13 profile. The unit can fit up to 16 front and RTM slots at a 1.0 in. The chassis is loaded with conduction-cooled card guides that allow testing and development of rugged 3U OpenVPX boards. It consists of fans that are placed above card guides for effective cooling in a front-to-rear format. The RiCool...
Read More »
New CV2 Extruded Aluminum Chassis Comes with Stainless Steel Fixings
The CV2 Extruded Aluminum Chassis is made from high tensile aluminum alloy and can handle payloads up to 140 lbs. The unit is offered in chassis depths of 14", 19", 24", 29", and 34" with heights ranging from 2U to 18U. Half-rack (half-width) sizes are also available. The product is certified to MIL-STD-810G. The unit is ideal for commercial and military applications.
Read More »
New MasterCase H500M Chassis Comes with Addressable RGB Fans and Controllers
MasterCase H500M Chassis is designed with edge-to-edge glass side panels on both sides, a glass top panel, and a glass front panel. Unit features USB 3.1 (Gen 2) Type-C port, and four additional USB 3.0 ports and two PCI slots at the rear side. The chassis’ front panel is compatible with up to a 360mm radiator whereas the top bracket supports 360mm radiator. The PSU shroud come with multiple...
Read More »
Dies & Stamping Services with Over 25 Years of Experience
PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.
Read More »
