New Extendo 1246X Telehandler Delivers 12,000 Pounds of Load Capacity
Powered by 117-horsepower cummins QSF 3.8 tier 4 final diesel engine. Offers a maximum lift height of 46 feet, 6 inches and max forward reach of 30 feet. Ideal for contractors and rental users working in applications ranging from construction to masonry to oil and gas.
Read More »
New Traverse T1258X Telehandler Comes with Dana VDT12000 Powershift Transmission Feature
Features a lift height of 58 ft-6 in. and provides 70 in. of horizontal boom transfer and 47 ft-10 in. maximum forward reach. Equipped with 117 HP Cummins QSF 3.8 Tier 4 Final diesel engine and is built on next gen X-series platform. Offers tight steer angle capability for an efficient turning radius of 14 ft-4 in.
Read More »
GEHL Introduces New Telescopic Handlers Featuring Four Wheel Drive
GEHL Telescopic Handlers come in DL11-44 GEN:3, DL11-55 GEN:3, DL12-40 GEN:3 and DL12-55 GEN:3 models. These units are equipped with 120-hp Tier IV Cummins QSF 3.8L engine, Dana 4-speed power shift transmission and a single joystick control. DL GEN:3 handler delivers maximum lift capacities ranging from 11,000 to 12,000 lb with lift heights from 40 ft-4 in. to 55 ft-5 in. The hydraulic...
Read More »
New Extendo 944X Telehandler is Equipped with 74 HP Cummins QSF 3.8 Tier 4 Final Diesel Engine
Pettibone’s Extendo 944X Telehandler provides a maximum lift capacity of 9,000 lbs with a forward reach of 30 ft and max lift height of 44 ft- 6 in. Unit comes with formed boom plates and bottom-mounted external cylinder. The Telehandler is designed with operator cab featuring ergonomic seat, pedal, joystick, steering wheel positions and analog/LCD gauge cluster. Unit is designed for rough...
Read More »
Gehl's Mark 74 Telescopic Handlers eliminate the need for after treatment fluid.
Mark74 telescopic handlers are equipped with a 74hp engine. Available in four models, RS6-42, RS8-42, RS8-44 and RS10-55, they have 360-degree visibility and come with Cummins QSF 3.8L engine, Tier 4 classification, 4-speed power-shift transmission and 295 lb-ft. (400 Nm) engine torque. Single joystick control in the handlers allows for controlling boom extension and retraction, attachment tilt,...
Read More »
T944X Telehandler offers a maximum lift capacity of 9,000 lbs.
T944X Telehandler is powered by 74 HP Cummins QSF 3.8 Tier 4 Final diesel engine with DOC muffler. Unit provides full-time 4-wheel-drive with limited-slip front axle differential and features pintle hitch mounts and offers turning radius of 14 ft, 1 in. Telehandler comes with operator cab consisting of ergonomic seat, pedal, joystick and steering wheel positions and an analog gauge cluster. Unit...
Read More »
Extendo 944B Telehandler is equipped with a rear axle stabilization system.
Extendo 944B Telehandler is designed with two wide-stance and heavy-duty lift cylinders and 74 HP Cummins QSF 3.8 Tier 4 final diesel engines with DOC muffler. Unit delivers a load capacity of 9,000 lb, forward reach up to 30 ft-3 in. and maximum lift height of 44 ft- 4 in. Telehandler features 24-degree of frame sway and feature single joystick and pilot operated controls. Unit provides 4-wheel,...
Read More »
Manitou Welcomes Briggs Equipment, Inc. to the Manitou Dealer Network
• Briggs Equipment, Inc. has been in business since 1896 • Briggs Equipment, Inc. has 11 locations to include Dothan, AL; Mobile, AL; Jacksonville, FL; Miami, FL; Orlando, FL; Tampa, FL; Atlanta, GA; Baton Rouge, LA; Lafayette, LA; Lake Charles, LA; New Orleans, LA; Abilene, TX; Austin, TX; Beaumont, TX; Brownsville, TX; College Station, TX; Corpus Christi, TX; Dallas, TX; Freeport, TX;...
Read More »
Gehl Welcomes K&H Tool Rental, LLC to the Gehl Dealer Network
• KH Tool Rental, LLC, a division of KH Construction LLC has been in business since 2015 • KH Tool Rental, LLC is located in Plainfield, Connecticut • KH Tool Rental, LLC will represent Gehl skid loaders, compact track loaders, compact excavators, articulated loaders and telescopic handlers WEST BEND, WISCONSINÂ- - (July 21, 2016) Gehl, a leading manufacturer of compact equipment for...
Read More »
Manitou Welcomes Briggs Equipment, Inc. to the Manitou Dealer Network
• Briggs Equipment, Inc. has been in business since 1996 • Briggs Equipment, Inc. has 11 locations to include Dothan, AL; Mobile, AL; Jacksonville, FL; Miami, FL; Orlando, FL; Tampa, FL; Atlanta, GA; Baton Rouge, LA; Lafayette, LA; Lake Charles, LA; New Orleans, LA; • Briggs Equipment, Inc. will represent Manitou heavy telescopic handlers (MHT product line) and Manitou rotating telescopic...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
