M1 Global Model Microcrane® fits through 36 in. doorways.
Mobile Cranes

M1 Global Model Microcrane® fits through 36 in. doorways.

M1 Global Model Microcrane® comes with 6.1 m H x 762 mm W hook and weighs 816 kg. This crane is designed with four piece boom that can extend up to 22 ft. tip height. Unit meets OSHA, ASME and CE standards and is used in indoors, outdoors and on roof tops lifting. Crane is designed with upper limit switch, 1.5 load safety factor, 4:1 rated hook, dual stop points and brakes on the rear and front...

Read More »
Basketball Pioneer Kenny Sailors and His Jump Shot Immortalized in 21+-Foot Sculpture
Mobile Cranes

Basketball Pioneer Kenny Sailors and His Jump Shot Immortalized in 21+-Foot Sculpture

Malvern, PA - December 18, 2017: The Wallace Cranes Tri-Adjustable Gantry Crane lifted into place a 21’ 8” foot sculpture of basketball pioneer and acknowledged inventor of the jump shot, Kenny Sailors.  Weighing under a ton, the statue was unveiled at the entrance to the newly renovated University of Wyoming’s Arena-Auditorium in Laramie, WY. The late Sailors, a UW alum, is a sports...

Read More »
G comes with water-cooled motor.
Cranes

G comes with water-cooled motor.

Güdel’s Turbo Gantry Front-of-Line features dual-prismatic bearing clusters and is suitable for FOL applications. Unit comes with Turbo BDS with carts, programmable nest stations, automatic fanner stations with aluminum destacking options. Product is equipped with stack forks and offer manual operating fanning capabilities.

Read More »
Large Clear Aperture Dual XY Gantry
Cranes

Large Clear Aperture Dual XY Gantry

STROKE 300 x 300 mm APERTURE 300 ... 300 mm REPEATABILITY 50 micron RESOLUTION 10 micron SYNCHRONIZED GANTRY The demand for accurate, robust, open-frame stages is met with IntelLIDrives dual-gantry design, large aperture stages that address the unique needs of scanning microscopy, wafer and printed circuit board inspection, automated assembly and wide range of specimens and samples scanning in...

Read More »
Lifters

R&M Materials Handling, Inc. and ACCENT Sales and Service Company Inc. Partner to Set Up a New Facility for Dean Machinery Co.

After 46 years in operation as a Caterpillar® sales and repair shop in Kansas City, Missouri, Dean Machinery Co., determined it had outgrown its facility. As a recognized leader in Caterpillar equipment solutions, plans were developed for a larger shop that could satisfy the handling capacities required to service the oversized equipment; mainly heavy excavating units. “As Caterpillar...

Read More »
Hoists & Cranes from J D Neuhaus Offer Outstanding Total Cost of Ownership
Hoists

Hoists & Cranes from J D Neuhaus Offer Outstanding Total Cost of Ownership

J D Neuhaus (JDN) hoist and crane material handling solutions deliver optimum performance and claim to offer the best Total Cost of Ownership (TCO) in its class. But what is Total Cost of Ownership (TCO)? TCO is a measure of the total cost of purchasing and operating a product over its useful life. This calculation is critical to a business because it shows the complete financial impact when...

Read More »
R&M Materials Handling, Inc. and Reading Crane Partner to Solve a 200-Ton Lifting Requirement for Rhoads industries.
Cranes

R&M Materials Handling, Inc. and Reading Crane Partner to Solve a 200-Ton Lifting Requirement for Rhoads industries.

R&M Materials Handling, Inc. was selected by Reading Crane for this 200-ton crane project based on the ability to meet the specifications outlined by the customer, within the budgeted time frame and with a competitive price. Reading Crane and Engineering Co. installed this 200-ton crane, equipped with two R&M SXL 100-ton hoists, into Rhoads Industries heavy manufacturing facility. The building is...

Read More »
F600SE.44 Wallboard Crane can be operated using digital RCH/RCS remote control.
Mobile Cranes

F600SE.44 Wallboard Crane can be operated using digital RCH/RCS remote control.

F600SE.44 Wallboard Crane offers vertical and horizontal reach of more than 115 ft and 101 ft respectively. Having a maximum lifting capacity of 6,600 lbs, unit comes in 8 ft 3 in. W x 28 ft 7 in. L x 9 ft 5 in. H dimensions. Equipped with a high-capacity oil cooler and an AGS automatic greasing system, crane features FX901 control system with 7 in. color touchscreen display. Unit’s Automatic...

Read More »
The EZ Rig Crane is for unique lifting systems
Mobile Cranes

The EZ Rig Crane is for unique lifting systems

The EZ Rig Crane is a compact, portable crane that can lift up to 2,400 lbs. and up to 26 ft. high. Now available with a jib boom attachment that can reach 12 ft. past the wheels while supporting weights up to 800 lbs., the mini crane is suitable for the manufacturing, industrial, transportation, roofing, trucking, heavy equipment, and HVAC industries. Other applications include pipe, steel, and...

Read More »
Syncronized XY Gantries BEMA Series feature synchtonized belt drive.
Cranes

Syncronized XY Gantries BEMA Series feature synchtonized belt drive.

Offering travel length from 300 x 300 mm to 3,000 x 3,0000 mm and speed up to 2 m/sec, Syncronized XY Gantries BEMA Series can be equipped to stepper motors, brush-less servo motor/encoders or integrated SMART motors. Suitable for high speed positioning for light-to-medium payloads applications, unit comes with load capacity of 10 to 30 Kg. Product can be fitted with ZR axis module for XYZR...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics