Material Handling & Storage

Jaw Couplings for Precision Conveyors

Jaw Couplings for Precision Conveyors

Marlborough, Massachusetts, July 2017. Ruland zero-backlash jaw couplings have a balanced design, accommodate all forms of misalignment and have high dampening capabilities, making them an ideal fit for precision conveyors with frequent starts and stops. These conveyor applications are often found on equipment used in semiconductor, solar, optical inspection, and medical automation. Jaw couplings...

Read More »
Multi-Axis Positioning Stages are integrated with linear encoders.

Multi-Axis Positioning Stages are integrated with linear encoders.

Available in N-865 and Q-845 models with 2 and 6 Nanometer incremental motion respectively, Multi-Axis Positioning Stages are driven by piezo ceramic motors. Delivering resolution of 0.5 and 1 nm resolution, N-865 and Q-845 can support loads up to 15N and 10 N. Q-845 achieves velocities up to 5 mm/sec. Embedded with software programmable virtual pivot points for alignment processes, units come...

Read More »
Assmann at WEFTEC® 2017

Assmann at WEFTEC® 2017

Assmann Corporation of America will be exhibiting in Booth No. 5041 at McCormick Place in Chicago, IL at WEFTEC® 2017, October 2nd – 4th. On display at the show will be Assmann’s IMT 2550 double wall storage tank. Assmann’s full line of double wall tanks range from 20 to 8850 U.S. gallons and eliminate chemical spills without the expense of lined concrete containment. A heavier-top...

Read More »
Shaft Collars, Couplings & Mounts Engineered to Conveyor System Requirements

Shaft Collars, Couplings & Mounts Engineered to Conveyor System Requirements

A full line of shaft collars, rigid couplings, and mounts for building conveyors with varying load capacities and environmental considerations are available from Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Shaft Collars, Couplings & Mounts are ideally suited for use in virtually all conveyor systems as stops, spacers, and mounting devices for guides, rollers, sensors, and...

Read More »
EliteNAS 12G Storage Rackmount Series feature dual port 10GBASE-T interface.

EliteNAS 12G Storage Rackmount Series feature dual port 10GBASE-T interface.

Designed for networking and data storage processes, EliteNAS 12G Storage Rackmount Series come with 1U/4, 2U/8, 2U/12, 3U/16, 4U/24, 4U/36, 8U/48, and 8U/72 bays. Supporting 12G SAS, 6G SATA HDDs, unit is equipped with hardware duo-core RAID controller and 80+ Platinum PSU. Featuring active cluster mirroring and network attached storage option, product allows user to connect SAS expander JBODs.

Read More »
VERYX C70 Digital Sorter comes with 700-mm wide inspection zone.

VERYX C70 Digital Sorter comes with 700-mm wide inspection zone.

Designed to sort line capacities ranging from 2,220 lbs. up to 11,000 lbs. of products per hour, VERYX C70 Chute-Fed Digital Sorter feature Key’s patented Chycane® chute. Featuring concave-shaped slide, infeed, collection shakers, cameras, laser sensors, laser scanner, unit is capable of defecting and removing foreign material. Integrated with LED lighting, product comes with auto-learning,...

Read More »
piFLOW®p Vacuum Conveyors are available in ATEX dust and gas approved designs.

piFLOW®p Vacuum Conveyors are available in ATEX dust and gas approved designs.

Used in food and pharmaceutical processing plants, piFLOW®p Vacuum Conveyors are enhanced with Wet-In-Place functionality. Featuring configurable design, units meet US FDA and EU 1935/2004 standards. Designed with ULPA and High Efficiency Particulate Air (HEPA) filters as accessories, WIP spray nozzles are available for inclusion/retrofitting. Unit’s accessories such as filters and seals are...

Read More »
Friction Cups offer safe and secure grip.

Friction Cups offer safe and secure grip.

Available in four different sizes in low and high configurations, BXF Family Friction Cups feature additional bellows for improved level of compensation performance and comprises of 36 cups in variety of shapes and configurations. Suitable for de-stacking applications, units eliminate need for cumbersome spring brackets/plungers that are to be fitted on ejectors. Measuring 15 x 35 mm and 15 x 65...

Read More »
UL Listed Metal Cabinets Protect Electronic Equipment

UL Listed Metal Cabinets Protect Electronic Equipment

July 11, 2017 – STI’s UL/cUL Listed Metal Protective Cabinets are offered in a variety of sizes to house electronic devices with space to spare. They protect equipment from hazardous parts and provide protection to enclosed equipment against ingress of falling dirt. Ideal for junction and power supply boxes, the heavy-duty cans are constructed with a powder coated metal to help protect...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics