New Material Handling & Storage Products

Lift Table picks up coils.

Roll Lift Table allows coil winding and welding operations to be handled by only one person. Turning and lifting processes are electrically powered with foot pedal operation, while push button controls 30 to 45 in. table height. Manual support wheel distances are adjustable. Steel support wheels include flanges for guiding workpiece. Controls include two emergency stops, forward/reverse rotation...

Lever Operated Hoist lifts 3/4 to 3 tons.

Series 653 offers standard lift from 5 to 10 ft and is designed for close quarter pulling, stretching, and hoisting applications. It is housed in impact-resistant, stamped steel frame gear case and cover. Powder coat finish offers corrosion protection. Weston type braking system provides positive load control and positioning. Hoist includes double pawl arraignment, 2 chain guide rollers, and...

Electric Chain Hoist has NEMA 4 rated control station.

ShopStar(TM) utilizes H4 duty cycle to lift up to 1000 pounds and provide 300 motor starts per hr. Maximum lifting speed is 40 ft/min when single reeved and 20 ft/min while double reeved. Its totally enclosed non-ventilated rugged cast aluminum alloy hoist frame thermally protects hoist duty motor from environmental contamination. It offers precision bearings, 10-pocket oblique lay liftwheel, and...

Desiccator Cabinet is available in 0.75 and 2 cu ft sizes.

Secador(TM) Desiccator Cabinet is available in passive dry storage or automated desiccating versions. Both provide sealed design with airtight, moisture-free storage capability. Able to be used with any commercially available desiccant, it reduces RH continuously down to 25%. Automatic regeneration of desiccant occurs every 20 minutes, keeping humidity levels constant. Cabinets include imbedded...

Pressure Vessels & Their Components

This white paper provides an in-depth look into custom fabricated pressure vessels and their components.

Four Door Container meets AIAG test guidelines.

ROPAK(TM) 64.5 in. extended length four drop door model meets Automotive Industry Action Group's (AIAG) RC-9 Returnable Container Performance Test Guidelines for bulk containers. It accommodates long and hard-to-fit parts, such as automotive bumper reinforcements, plastic trim, and air ducts. Containers stack high, to conserve floor space; withstand years of repeated wear and handling, and are...

Screw Feeders have USDA approved seal.

Model DB1 Volumetric Screw Feeders feature rear seal made of Teflon(R) braids and bronze pusher, allowing use in sanitary applications. They utilize only 5 moving parts to produce metering accuracy of +/- 1 to 1 1/2%. Units are constructed entirely of steel and offer compound screw arrangement that ensures all flights of metering screw are filled to maximum capacity with uniformly dense material.

Scissor Lifts handle wide, bulky loads.

Double wide scissor lifts, available in 18 models, feature 2 sets of scissor legs under one platform for added strength. Platform sizes range from 14 in. wide x 36 in. long up to 96 in. wide x 96 in. long, with capacities from 4000 to 9600 lbs. Vertical travels are 24, 36, and 48 in. Lifts are equipped with built-in 2 HP motor, magnetic motor starter, 24 V control transformer, and safety fused...

Grab Hooks work with CM Herc-Alloy(R) 800 chains.

Cradleless Clevlok(R) Grab Hooks, forged in grade 80 alloy, are available in 9/32 to 5/8 in. sizes, and offer Clevlok style clevis. Hooks have working load limit of 3,500 to 18,000 lbs. CM grade 80 Herc-Alloy(R) 800 chain sling is black finish and/or color coded orange. Tag attached to sling permanently identifies grade, type, working load limit (at specific angle of lift), and registration...

Dispensing System suits potting/encapsulation applications.

Air-powered See-Flo(R) 387 table-top meter/mix/dispense system is designed to dispense 2-component materials. Suitable for low-viscosity silicone, urethane, or epoxy, system permits dispensing as metered shot or controlled bead. Its positive displacement meter mixes precisely to established ratio. Applications include central fill stations that manually fill syringe style applicators.

Tote Bags come in camouflage colors.

Camouflage Totes are constructed of rugged, tear-resistant nylon polyester imprinted with leafy camouflage pattern. Totes have zipper closures to prevent tool loss, reinforced bottoms for durability, and removable shoulder straps. Nylon-stitched and rivet reinforced for durability, totes are available in all popular sizes and shapes. BucketBag(TM) Tool Carrier, which fit over rim of standard...

More performance and functionality for Sinumerik 828D CNC

Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.