Material Handling & Storage

Wheel Loader offers 60,000 lb breakout force.

Triple Nickel Model 555 B, 6.0 cu yd wheel loader features 315 hp Cummins N14C turbo-charged and after-cooled engine. It includes internal, force cooled, wet disc brakes; lifetime lubricated drive shafts; hydrostatic steering; pilot operated, hydraulic controls; and 2,000 hr sealed and lubricated bucket/boom pins. Bucket sizes range from 5.5 to 11.0 cu yd.

Read More »
Travel Carriage holds torch in flat and vertical positions.

Travel Carriage holds torch in flat and vertical positions.

BUG-GY-VERT welding travel carriage uses 14.4 V rechargeable battery and magnetic base to hold torch. Guide arms track and steer into fillet joint; rail is not required to operate machine. Torch oscillator allows unit to perform weave welds. BUG-GY-VERT provides constant travel rate and precise path control.

Read More »
Transport Cart has 3-position fold-down handle.

Transport Cart has 3-position fold-down handle.

Compact Tote Truck is molded from high-density polyethylene structural foam. Deck platform measures 35.5 in. long x 22.5 in. wide and provides textured, non-skid surface that prevents loads from shifting during transport. Epoxy-coated, steel push/pull handle resists rusting. Cart glides on 2 fixed and 2 swivel wheels. Caster options provide load capacities from 300 to 1000 lbs. Optional, canvas,...

Read More »
Work Centers come in fixed and mobile versions.

Work Centers come in fixed and mobile versions.

Work centers include steel work benches and work tables outfitted with storage bins, hanging systems, and cabinets. Heavy-duty workbenches are available in 30 x 60 or 30 x 72 in. deck sizes. Work surface is available in 11-gauge steel or 1 1/4 in. finished oak with rounded edges. Both surfaces accommodate vises or clamps. Fixed-height model stands at 34 in., and adjustable-height model ranges in...

Read More »
Divider/Feeder provides representative samples.

Divider/Feeder provides representative samples.

PT 100 Sample Divider ensures that sample represents entire bulk instead of random samples taken out of buckets with spatulas or spoons. Rotating rifflers spilt up to 5 L of inhomogeneous samples with wide particle size distribution into 6, 8, or 10 representative sub-samples. DR 100 Vibratory Feeder ensures that divider is centered over inlet hopper for no-loss feeding. Feed rate is controlled...

Read More »
Can Tab Lubricator cuts oil use, reduces rejects.

Can Tab Lubricator cuts oil use, reduces rejects.

MicroCoat(R) lubrication method gives can makers control over amount of oil applied to pull tabs. It lowers lubricant use and reduces residual oil that can migrate from tabs and lids into can contents. It has precision spray valves that use low volume, low pressure (LVLP) air to coat pull tab stock with fine film of oil that keeps dies sharp, eliminates pressroom mist and puddles, and minimizes...

Read More »
Tape Dispenser keeps tape ready and out of the way.

Tape Dispenser keeps tape ready and out of the way.

Pull-and-Tear bench-mount tape dispensers, built from 1/8 in. metal with powder coat, are available in 1 and 2 in. widths. Both widths are available in either permanent flush mount or portable clamp-on versions. Dispensers mount permanently on either side of workstations using screws or, temporarily, with a clamp. Tape may be slipped onto spool without dis-assembling unit. Applications include...

Read More »
Pallet Truck has super low-profile.

Pallet Truck has super low-profile.

Super Low-Profile pallet truck has lowered height of 1 1/2 in., raised height of 3 3/4 in., and can enter all 4 sides of pallets. Steel frame is reinforced to handle 2,200 lb loads. It has rubber grip control handle with three-function positioning (raise, lower or neutral), lifetime lubricated bearings, and chrome plated pump piston with polyurethane seals. Truck is available in three different...

Read More »
Portable Holding Tank can be pulled by hand.

Portable Holding Tank can be pulled by hand.

32 gallon 4-Wheeler Tote-Along tank is equipped with two 10 in. rear wheels and double swivel front wheels for tow or pull on level operation. Ring at end of handle permits using any vehicle with a hitch ball to tow tank to dump station. Tank is positioned and emptied via its built-in 3 in. sewer valve. Tank is constructed of blow-molded polyethylene, and comes with 3 in. bayonet inlet and outlet...

Read More »
Steam Separator has no moving parts.

Steam Separator has no moving parts.

Eliminator removes entrained moisture, condensate, dirt, scale, and other contaminants in steam and compressed air systems. Internal baffle system extracts moisture and solids above 10 microns. System is self-draining without steam loss. Eliminator is available for operating pressures to 600 psig and capacities to 35,000 lbs per hour, with 1/2 to 2 in. NPT or socketweld connections, or 2 1/2 to 6...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics