New Fluid & Gas Flow Equipment Products

Cord Fittings protect against liquids.

UL-listed Liquid Tight Fittings, with metric hubs, provide 35 lb of strain relief to cords, protecting from forces of push, pull, and flex. They provide IP 68 liquid-tight protection and include locknuts to secure fittings to chassis. Flexible pigtail extender prevents sharp bends and extends cable life. Straight-thru, pigtail, and right-angle styles are available. Sizes are M12, M16, M20, M25...

EMT Fittings eliminate need for bending machine.

Flexible, strip-steel Flexel fittings, with zinc-plated steel ends, connect lengths of EMT together, and to panel boards and junction boxes. Hand-bendable fittings accommodate straight tubing, full 90 degree bend, and any position in between, including compound and offset configurations. Although rigid enough to maintain shape when installed, fittings isolate equipment vibration. Sizes are 1 1/4...

Pump supplies significant power in compact arrangement.

Compressed air-operated, reciprocating P923 Series supplies 1 1/2 gpm flow and 3,000 psi pressure directly to D03 manifold through 2-bolt interface. Compact size of finished power unit reduces required plant floor space, number of components, and number of leakage points. Combined pumps supply power on demand, useful in clamping and work-holding circuits, where high pressure is maintained for...

Telescopic Cylinders are available in up to 4 stages.

Mini-SpaceÃ-® telescopic cylinders use less space than conventional, rodless or cable cylinders. Retracted length is fraction of extended length, and both ports are on rod end allowing use where other cylinders do not fit. Two stage unit extends to 59 in. and when closed occupies 23 in. It has 36 in. of stroke and is made to operate on air or hydraulic fluid. Different mounting styles are...

Guide To Swageless Fittings

Electroline specializes in innovative, easy-to-install swageless fittings. The following guide will highlight everything you need to know about swageless fittings.

Wire Connectors are designed for high temperatures.

Hi-Temp Wire Connectors can be used in temperatures up to 150Ã-

Isolation Valves are ideal for low flow applications.

Model Series STV-K molded PEEK, solenoid operated, 2- and 3-way valves feature seat seal constructed of Perfluorelastomer providing chemical and abrasion resistance. Valves have 1.2mm internal orifice with 1/4-28 or M6 threaded port connections. They are rated for 12 or 24 Vdc continuous duty. Applications include automated chemistry, sample/reagent handling, solvent flush or rinse cycles, and...

Slide incorporates ball-bearing system.

Magnetically-coupled High Load Ultran Slide provides high-load carrying capability within Ultran Slide rodless cylinder. Bore sizes are 1 1/16, 1 1/4 and 1 1/2 in. Prelubricated unit provides maintenance-free, leak-free travel. Transition Plates couple rodless cylinders to Linear Thrusters to create multi-axis configurations. Options include stroke adjustment, bumpers, seals for low-pressure...

Magnetic Drive Pump has inert flow path and long life.

Model NH-PX brushless dc pump series has all inert pump housing and impeller, ceramic shaft and bearings, and wetted materials of glass filled polypropylene, PVDF, or ETFE. Pump offers life expectancy in excess of 10,000 maintenance-free hours. Maximum free flow is 30 lpm and maximum head pressure is 16 ft of water. Applications include plating tanks, temperature recirculators, ultrapure water...

Feedthrough Actuator provides motion control in vacuum.

Chamberlink, single-unit combination feedthrough and servo actuator, allows output shaft to operate in vacuum without shaft seals, preventing leaks. It is available in sizes 10, 14, and 32, with output torques from 10 to 300 in.-lb and output speeds of 10 to 50 rpm. Actuator is rated for vacuum levels of 10E-8 Torr.

Valve Manifold supports DeviceNet interface.

Direct Link Compact Performance Valve Manifold provides for 8 valve positions and is available in 10, 14 and 18mm port sizes. Voltage range of 11 to 28 Vdc is supported. Manifold can be populated with single or double solenoid 5/2- or double solenoid 5/3-way, and dual 3/2-way (normally open) or dual 3/2-way (normally closed), or combination of dual configurations. Type 10 manifold meets IP 65...

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.