New Fluid & Gas Flow Equipment Products

Thermostatic By-pass Valve permits zone control.

Three-way valve is designed for new or retrofit fin-tube baseboard installations that use non-electric thermostat. It comes with compression fittings for 3/4 in. copper tube, and is installed ahead of fin-tube in supply side, where radiation enters room. No. 320 liquid-filled thermostat provides quick response to temperature changes. From low freeze protection setting of 43-°F, it may be set in...

Compressed Air Dryer works without heat.

Hydrobloc HB Series heatless desiccant dryer provides ultra dry compressed air down to -100Ã-

Inlet/Exhaust Trap fits vacuum systems.

MV Multi-Trap Model IC has stainless steel knock-down stage (for collecting heavy solids) and water-cooled internal coils with more than 200 sq. in. of surface area to collect condensables and particulates. It can be configured with 2 banks of 10, replaceable, 4-1/2 in. filter elements or 1 bank of five, 9-1/2 in. elements. High capacity trap can be used in chemical, optoelectronic,...

Sanitary Fittings meet ASME BPE standards.

Series 25 BioPharm line of 316L stainless steel clamp fittings and buttweld components for biotechnology and pharmaceutical processing applications meet ASME requirements for ovality, end face squareness, wall thickness, and material chemistry. Raw materials used in fittings are traceable to original supplier, with CMTRs maintained on file. Fittings include automatic tube weld ferrules, gaskets,...

Axial Flow Check Valves for Pumps and Compressors

DFT® Inc. has provided a range of valve solutions for customers struggling with pump and compressor problems.

Soft Shell Connectors are available in 2 to 12 positions.

Micro MATE-N-LOK 3mm-pitch connectors have dual-beam contacts for improved mating area, and high temperature housings for IR processing. Single row contacts on 3mm centerlines accommodate installations where thin, tight connectors capable of handling up to 5 A are required. Units can provide power and signal I/O and power interface interconnections.

Electrostatic Spray Guns work without electricity.

Air-operated Pro Xs electrostatic guns have internal power supply that provides electrostatic power without external electrical connections or voltage cables. They have built-in smart display with voltage and current readout at gun, adjustable voltage at gun, and indexing air cap that is easy to align for consistent spraying. Manual and automatic air spray and air-assist spray guns are available,...

Interconnects combine differential and single ended systems.

Q-Pair high speed interconnects in differential pair configurations allow electrical performance at up to 5GHz operating frequencies. Connectors can be partitioned to include both differential pair and single-ended signal pins, allowing board designer to optimize system for high speed where required, while minimizing impact on density.

Wastewater Pump provides built-in flexibility.

Compact, electric, submersible Series K, with 15, 20 and 27 hp motors, pumps raw sewage, industrial wastewater, and other contaminated and abrasive liquids. Circulated clean water/anti-freeze media keeps pump running cool, even when dry. Trimmable impeller enables end-user to meet calculated requirements. Pump provides regulatory control over flow, energy costs, and wear-life by eliminating...

Relief Valves are designed for gas or liquid applications.

High pressure relief valves protect systems or devices from over-pressure damage and failure. They are available in pressures from 1,000 to 10,000 psi, and feature stainless steel body, nylon seat and PTFE/EPDM seals. Inlet or thru ports and outlet/vent sizes are 1/4 in. FNPT. Valves have 0.70 in. dia orifice and Cv of 0.12. They are externally adjustable and can be mounted in line.

Tagging Relays operate circuit breakers remotely.

Series 24 and 31 for automated power distribution systems are available with 2 or 3 positions, and have orange hot-line safety tags. Relays may be operated manually, electrically, or remotely. Two-position models offer Normal and Tagged positions, while three-position models have Closed, Open, or Tagged positions. All allow bi-directional operation and have 2 N/O and 2 N/C contacts per deck....

Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment

Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.