New Fluid & Gas Flow Equipment Products

Feedthrough Actuator provides motion control in vacuum.

Chamberlink, single-unit combination feedthrough and servo actuator, allows output shaft to operate in vacuum without shaft seals, preventing leaks. It is available in sizes 10, 14, and 32, with output torques from 10 to 300 in.-lb and output speeds of 10 to 50 rpm. Actuator is rated for vacuum levels of 10E-8 Torr.

Membrane Filter works on air and gases.

SteridyneÃ-® 0.2 Ã-µm PVDF hydrophobic filter is absolute-rated for sterile filtration of air and gases. It has broad chemical compatibility, and is suitable for filtration of pharmaceutical, biological, and aggressive process gases such as sterile tank venting, fermentation air, and compressed air and gases.

Valve Manifold mounts up to 20 solenoid valves.

Compact aluminum solenoid valve manifold and subbase system lets normally open and normally closed valves be mounted simultaneously. Manifolds are available with 3/2 bottom ports or 3/2 end ports in M5, NPT, BSPP or BSPT threads. M5 size cylinder port can be ordered on either electrical or non-electrical side. Solenoid valves have glass-filled polyamide body, steel internal parts, thermoplastic...

ISO Valves have CSA/NRTL-C approval.

H ISO Series valves are offered in 3 sizes with Cv ratings of 1.55, 3.60, and 6.60. Two versions are available: 5599-1 non-plug-in valve (available in Automotive Common Wiring and Individual CNOMO Pilot connection styles), and 5599-2 Valve-to-Base plug-in version. Valves offer company's WCS spool system that compensates for seal wear, Internal/External Pilot Switch System, 1.8 Watt current draw,...

Finding the Right Bore Configuration for your Application

There are multiple things to consider when choosing a bore configuration for your application. Check out this e-book to learn more!

Stopper Cylinders manage conveyor workflow.

STA Series stops carriers, pallets, or packages containing workpieces. They are available in three models and 16 configurations, including: trunnion rod that stops workpiece carriers weighing up to 330 lb by protruding rod directly into path of carrier; roller style cylinder with piston rod that can stop carrier or allow it to roll at controlled speed; and toggle lever style that can stop load up...

Polyurethane Tubing mates with push-to-connect fittings.

SUPERTHANEÃ-® HARD DUROMETER Shore A hardness tubing is available in sizes from 1/8 through 3/4 in. OD and from 3mm through 12mm. It is made from ether-based polyurethane, and resists attack from moisture, humidity, and fungus. Tubing is naturally flexible and does not contain plasticizers, which can leach out and cause tube hardening or flow contamination. SUPERTHANE resists kinking,...

Bandstop Filter is for Ku-band.

Model 14560 passes satellite downlink signal from 10.95-12.75 GHz with less than 0.1 dB insertion loss. Lightweight aluminum filter provides greater than 70 dB attenuation to unwanted uplink signal from 14.0-14.5 GHz. Return loss is greater than 20 dB across entire downlink spectrum. Military-grade plating permits electrical characteristics to be maintained over broad range of field operating and...

Filter and Lubricator come with NPT or BSPP threads.

Hi-Flow PL602 Series Filter offers flow rates up to 380 SCFM, providing excellent water removal efficiency. It includes 32 oz metal bowl with twist drain, and is available in 1, 1-1/4 and 1-1/2 in. port sizes. PL606 Series Lubricator provides proportional oil delivery and has choice of 32 or 64 oz bowls that can be filled while under pressure. It is available in 1, 1-1/4 and 1-1/2 in. port sizes,...

FRL Units are constructed of stainless steel.

Prep-AirÃ-® II units include filters, coalescing filters, regulators, piggybacks and lubricators. They are available in 2 basic body sizes: 3/8 in. body with 1/2 in. ports and miniature 1/8 in. body with 1/4 in. ports, with either NPT or BSPP threads. Individual units can be piped together using stainless steel pipe nipples. All units meet NACE specifications.

Inline Valves mount on manifold.

B4, B7 and B8 pneumatic valves mount on IEM bar manifold and connect via Valvetronic 110 collective wiring system. B4 has 1/4 in. ports and 1.22 Cv flow rate; B7 has 1/2 in. ports and 5.9 Cv flow rate; and B8 has 3/4 in. ports and 7.0 Cv. Valves are available with solenoid or remote pilots. Options and accessories include 3/8 in. Prestolok fittings and intrinsically safe and hazardous duty...

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.