Water Purifiers

Fluid & Gas Flow Equipment

RayVio Establishes 60mW UV LED as the Industry Benchmark for Disinfection and Sterilization Solutions

XP Series UV LEDs replace hazardous mercury lamps for water purification and sanitization against bacteria, viruses and superbugs like MRSA. HAYWARD, Calif., Jan. 4, 2017 - RayVio Corp., an advanced health and hygiene company, is delivering the industry's first 60mW UV LED in volume. The breakthrough performance from the company's XP Series is making the use of ultraviolet LEDs for...

Read More »

Jet Edge Bringing Latest 5-Axis Waterjet Cutting System to FABTECH
Fluid & Gas Flow Equipment

Jet Edge Bringing Latest 5-Axis Waterjet Cutting System to FABTECH

Waterjet Manufacturer Performing Live Waterjet Cutting Demonstrations, Showing Latest Waterjet Pumps, Closed Loop Water Recycling ST. MICHAEL, Minn. – Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet technology, is bringing its latest precision waterjet cutting technology to FABTECH, Nov. 16-18 in Las Vegas.  Look for Jet Edge in Booth C25085 During FABTECH, Jet Edge will...

Read More »

Jet Edge Bringing Latest 5-Axis Waterjet Cutting System to FABTECH
Fluid & Gas Flow Equipment

Jet Edge Bringing Latest 5-Axis Waterjet Cutting System to FABTECH

Waterjet Manufacturer Performing Live Waterjet Cutting Demonstrations, Showing Latest Waterjet Pumps, Closed Loop Water Recycling ST. MICHAEL, Minn. – Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet technology, is bringing its latest precision waterjet cutting technology to FABTECH, Nov. 16-18 in Las Vegas.  Look for Jet Edge in Booth C25085 During FABTECH, Jet Edge will...

Read More »
Electrical Equipment & Systems

IntelliFlux(TM) Artificial Intelligence-Based Control System from Water Planet Powers Demonstrations to Evaluate Performance and Cost of Treating Produced Water for Use in Agricultural Irrigation

BAKERSFIELD, Calif. - IntelliFlux™ artificial intelligence (AI) based software developed by Water Planet, Inc. is being used in a pilot project in Wasco, California to evaluate the performance and economics of treating produced water for agricultural reuse. The project, which is being done with Sweetwater Tech Resources, utilizes Water Planet's IMS-5000 Integrated Produced Water Treatment...

Read More »
Injection Molding from 3D Printed Molds
Sponsored

Injection Molding from 3D Printed Molds

3D printing has become one of the biggest trending technological innovations of the 21st century. With its logistical efficiency, ability to easily modify designs, and speed of production, it’s no surprise that the manufacturing industry is turning to 3D printing for a multitude of applications. This white paper explores how 3D printing can be beneficial specifically for manufacturers focused on low volume injection molding of small plastic parts. The report features a succinct yet detailed overview of two case studies, both of which exhibit the advantages and possible challenges of making molds via 3D printing. The article goes on to offer advice on how such challenges can be overcome, as well as some guidelines for mold design. If you’re looking to break the mold to save time and money, download this white paper and see if 3D printing is the right solution for your business.

Read More »
Submicron Water Filters are offered with 5 micron sediment wrap.
Electronic Components & Devices

Submicron Water Filters are offered with 5 micron sediment wrap.

Available with 5-micron sediment wrap to reduce dirt, sand, sediment, rust, and fine particles, ULTRA-D Eco uses electroadsorptive technology for water filtration. This configuration is available with all ULTRA-D filter models: original media, original with carbon, original with NSF-approved microbial agent (Agion silver), and original with Agion silver and carbon. Beneficial for point-of-entry...

Read More »

Niagara Bottling Finalizes Agreement with New Logic Research to Install VSEP
Electrical Equipment & Systems

Niagara Bottling Finalizes Agreement with New Logic Research to Install VSEP

Increases sustainability with purification system for 99%+ water efficiency EMERYVILLE, Calif. and ONTARIO, Calif. — New Logic Research and Niagara Bottling, LLC ( Niagara") announced today the finalization of an agreement to provide a VSEP® brine minimization system for a Niagara facility currently being built in the United States. The system will enable Niagara to further increase its...

Read More »
Fluid & Gas Flow Equipment

Labconco's WaterPro

WaterPro Water Purification Systems provide point-of-use pure water for the laboratory and now sport a fresh, new look. RO purified water is the first level of laboratory water purification and will produce Type III or IV water depending on the tap water quality. Water is dispensed at a rate of 1 liter per minute depending on inlet water temperature. The internal reservoir holds 17 liters of...

Read More »
Purification System produces Type I, RO-purified water from tap.
Fluid & Gas Flow Equipment

Purification System produces Type I, RO-purified water from tap.

Offering all-in-one functionality from benchtop form factor, WaterPro® BT™ delivers ultrapure Type I, 18.2 megohm-cm, at >0.5 Lpm (typ) at inlet water temperatures of 25°C, either manually or volumetrically, directly from tap water. System also delivers Reverse Osmosis (RO)-purified Type III water, which is accessible via outlet valve and produced at up to 3 Lph (0.05 Lpm). Optional UV lamp...

Read More »
Fluid & Gas Flow Equipment

Aqua-Chem Aids Department of Defense in Containing Ebola Virus Outbreak in Liberia

Knoxville, TN – Aqua-Chem, a worldwide leader in manufacturing water purification systems, is supporting Task Force Lifeliner, 101st Sustainment Brigade, 101st Airborne Division in support of United Assistance in Buchanan, Liberia. United Assistance is a Department of Defense operation providing logistics, training and engineering support to the U.S. Agency for International Development's...

Read More »

Jet Edge Exhibiting Latest Waterjet Cutting Technology at EASTEC Jet Edge Waterjets Cut Precise Parts from Virtually Any Material
Fluid & Gas Flow Equipment

Jet Edge Exhibiting Latest Waterjet Cutting Technology at EASTEC Jet Edge Waterjets Cut Precise Parts from Virtually Any Material

ST. MICHAEL, Minn. – Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet technology, is exhibiting its latest precision waterjet cutting systems at EASTEC, May 12-14 at the Eastern States Exposition in West Springfield, Mass. During EASTEC, Jet Edge will perform live 5-axis abrasive waterjet cutting demonstrations on its premiere 90,000 psi (6200 bar) EDGE X-5® 5-axis...

Read More »

All Topics