Rotary Airlocks

Rotary Valves feature 6-vane rotor design.
Rotary Airlocks

Rotary Valves feature 6-vane rotor design.

Available in 304 or 316 stainless steel as well as cast iron, SD Series maximizes bulk material throughput efficiency in feeding and metering applications. Large pocket area facilitates complete release from rotor pocket of materials that may have poor flow characteristics. Housings are CNC-machined to precise tolerances, eliminating axial shaft movement, seal leakage, and shortened bearing life....

Read More »
Techcon Systems to Demonstrate New TS9200D Series Jet Tech Valve at the IPC APEX EXPO
Rotary Airlocks

Techcon Systems to Demonstrate New TS9200D Series Jet Tech Valve at the IPC APEX EXPO

Garden Grove, CA- Techcon Systems, a product group of OK International and a leading provider of fluid dispensing systems and products, will demonstrate the soon-to-be released TS9200D Series Jet Tech valve in Booth #735 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. Scheduled for release in March, the TS9200D Series...

Read More »
Pressure Control Valve is available in 1-4 in. sizes.
Rotary Airlocks

Pressure Control Valve is available in 1-4 in. sizes.

Designed to provide accurate over and/or under downstream pressure protection, pneumatically actuated Slam Shut(TM) Valve comes in 1 in. linear plug design and 2, 3, and 4 in. rotary design sizes. Valve design guarantees snap acting release of latch only when designated set points are exceeded, eliminating accidental shutoffs from vibration or other conditions. Rotary design versions can be...

Read More »
K-Tron Process Group to Introduce New Material Flow Aid, New Controls, and New K-Tron Premier Receiver Design, at PTXi 2010, May 4-6, 2010, Donald E. Stephens Convention Center, Rosemont, Illinois, Booth 1413
Rotary Airlocks

K-Tron Process Group to Introduce New Material Flow Aid, New Controls, and New K-Tron Premier Receiver Design, at PTXi 2010, May 4-6, 2010, Donald E. Stephens Convention Center, Rosemont, Illinois, Booth 1413

PITMAN, NJ - K-Tron Process Group will exhibit several new additions to the K-Tron Feeder and K-Tron Premier product line at PTXi 2010 (Powder and Bulk Solids Show), May 4-6, 2010, at the Donald E. Stephens Convention Center, Rosemont, Illinois, Booth 1413. For more information and online booth preview, visit www.ktron.com/PTXi. The K-Tron booth will feature the following powder and bulk...

Read More »
Rotary Airlocks

Rotary Valve suits automated process on/off applications.

With pressure-assisting action of valve seal ring, Fisher-® POSI-SEAL-® A81 ensures complete shutoff against maximum rated pressure drop, regardless of flow direction. Interchangeable sealing technology allows valve body to accept both soft and metal seals, while opening and closing path of eccentric valve disk minimizes contact with seal ring to reduce seal wear. Used with FieldQ-®...

Read More »
Rotary Airlocks

Dresser Masoneilan® Control Valves Chosen for Angola LNG Plant

HOUSTON, TEXAS (January, 13 2009) - Dresser Masoneilan-® has been selected to provide control valves for the Angola liquefied natural gas (Angola LNG) Project. The contract was awarded by Bechtel's Oil, Gas & Chemicals global business unit (Bechtel), which holds the engineering, procurement and construction contract for the onshore portion of the project. Located near Soyo, a coastal community...

Read More »
K-Tron and Premier Pneumatics (K-Tron Process Group) to Exhibit New and Expanded Process Automation Product Line at PTXi 2008/Powder and Bulk Solids Show
Rotary Airlocks

K-Tron and Premier Pneumatics (K-Tron Process Group) to Exhibit New and Expanded Process Automation Product Line at PTXi 2008/Powder and Bulk Solids Show

Powder and Bulk Solids Show, May 6-8, 2008, Donald E. Stevens Convention Center, Rosemont, Illinois, Booth 1328 PITMAN, NJ (February 25, 2008) - The K-Tron Process Group will exhibit several new additions to the K-Tron Feeder and Premier Pneumatics product line at PTXi 2008 (Powder and Bulk Solids Show), May 6-8, 2008, Donald E. Stevens Convention Center, Rosemont, Illinois, Booth 1328. The...

Read More »
K-Tron to Introduce New Extrusion Control System, Micro Feeder for Pellets and Premier Pneumatics Products at K-Show, October 24-31, Hall 10, Booth A74
Rotary Airlocks

K-Tron to Introduce New Extrusion Control System, Micro Feeder for Pellets and Premier Pneumatics Products at K-Show, October 24-31, Hall 10, Booth A74

K-Tron will introduce a new version of its Micro Cone low rate feeder. By utilizing a screw-less rotating tube or cone, the Micro Cone Feeder is designed to dose as low as 0.02 to 6 dm³/hr. This new Micro Cone feeder will use KCM controls and a stepper motor and will be available in volumetric and gravimetric models. It can also be incorporated into the K4G blender stand, to offer on-line...

Read More »
Rotary Valves optimize dust handling/disposal efficiency.
Rotary Airlocks

Rotary Valves optimize dust handling/disposal efficiency.

Featuring 6-vane design, RV8-6 and RV12-6 are 8 and 12 in. dia Rotary Air Valves that help maintain constant air pressure in push- and pull-through cyclone style Dustkop-® dust collection systems. Air seal capability allows use of open, non-sealed collection containers. Models RV8-6 and RV12-6 are respectively fabricated with -¼ and 3/8 in. thick side plate, mating ring, and end flange. Model...

Read More »
Rotary Airlock lets large particles pass through valve.
Rotary Airlocks

Rotary Airlock lets large particles pass through valve.

Flexible tip rotary airlock provides air seal in dust collection and pneumatic conveying applications. It allows larger particles to pass through valve while maintaining air seal. The unit is suited for wood and other fibrous dust applications. Valve has reinforced rubber vane tips, stiffened housing, and roller chain drive with heavy duty gear reducer and standard TEFC motor.

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics