Flomatic Corporation Introduces Model 508S6 Ball Check Valves with Full-Ported Valve Seat
The Model 508S6 Ball Check Valves are available in 1-1/4 1-1/2, and 2 in. sizes and are rated to 150 PSI. The units are constructed of 316 stainless steel and are designed for vacuum or anti-flooding valve, submersible wastewater lift station applications. The full-ported valve seat allows strong phenolic ball to seat on a Nitrile (Buna-N) seat. They are offered with optional vacuum breaker that...
Read More »
Hayward Presents New YC Series Y-Check Valves for Harsh Chemical Feed Applications
The YC Series Y-Check Valves are now offered with FPM o-ring seals in 1/2, 3/4 and 1 in. sizes and is made from polyvinylidene fluoride material. The unit is suitable for applications such as water and wastewater treatment, clean water technology, chemical feed systems, chemical processing and mineral processing. The product features a pressure rating of 150 psi at 70ºF and a maximum service...
Read More »
Qoisna Offers TPE-Coated-Stem Check Valves for EtO and Gamma Sterilization
The TPE-Coated-Stem Check Valves feature male luer lock outlet with a thermoplastic elastomer (TPE) coated stem. The unit’s stem avoids adherence of mating surfaces and improves sealing for an easy disconnection of luers. They are manufactured to ISO Class 8 Clean Room; BPA- and latex-free; REACH and RoHS standards. The valves minimize the risk of stress cracks at female luer connection.
Read More »
Bonomis' New Series S250 In-line Check Valves Features Leak-free Service and Low-cracking .50-PSI Spring-loaded FKM Seat
Bonomi launches Series S250 Check Valves with a cold-formed 316 stainless steel body gives users the highest Cv at the lowest cost. The spring-loaded FKM seat provides high flow capacity, minimal head loss and bubble-tight protection against reverse flow. They are available in six sizes and FNPT threaded from 1/2” to 2”. The valves rate to 250 WOG with an operating temperature range of -4...
Read More »
Comparing Casting Processes
This white paper compares and contrasts common casting processes.
Read More »
Latest PVDF Ball Check Valves Come with Square Cut Seat
Hayward’s TC Series PVDF Ball Check Valves come in true union design featuring threaded or IPS Sch40/80 socket fusion end connections. Units are available in sizes ranging from 1/4 to 1 in. and features FPM O-Ring seals. Suitable for vertical installations, valves are rated to 150 psi pressure at 23°C temperature and can be operated up to 115°C temperature. These valves are used in waste...
Read More »
TLW® Wafer Check Valves are Designed for Safety: Eliminates Leak Paths, No Exposed Bolts
TLW® Wafer Check Valves feature a single solid body construction with no exposed bolts to ensure a tight seal and prevent leak paths. Offered in 2 to 24 in. line sizes, the product allows either horizontal or vertical installation and is compatible with steam, water, and gaseous media. Units are constructed from A216-grade WCB carbon steel or A 351 CF8M stainless steel. TLW valves meet API...
Read More »
Cast Steel Flanged Gate and Swing Check Valves meet ASTM A216 WCB standards.
150 lb. Cast Steel Flanged Gate and Swing Check Valves are offered in sizes ranging from 1/4 up to 2 in. with flanged ball valves from 1 to 6 in. 400CSF Gate Valves and 422CSF swing check valves come with bolted bonnet whereas 405CSF Globe Valves feature outside screw and yoke. Units offer maximum pressure and temperature of 285 PSI and 1000ºF respectively.
Read More »
Mueller Swing Check Valves come in ductile iron construction.
Mueller Swing Check Valves are available in 2, 14, and 16 in. sizes and are UL-listed. Units feature bronze to BUNA seating, lifting rings, PN16 drilling, bosses and a drain plug. Products are rated at 350 psig cold working pressure and are FM-approved.
Read More »
Jerguson® 360 Series Safety Ballcheck Valves come with cleanout port.
Jerguson® 360 Series Safety Ballcheck Valves are equipped with locking pin and lock-out tag-out slot. Units are API 641 and ISO 15848-1 certified and meet API Class V shutoff requirements. Products are integrated on armored glass gage and quarter-turn position visible handle.
Read More »
Model 888VFD Check Valve is suitable for ANSI 150# or 300# mounting.
Available in 2 – 4 in. with 316 Stainless Steel guide and seat with EPDM elastomer disc standard, Model 888VFD Wafer Style Check Valve comes with double guided spring loaded poppet. Minimizing water hammer using field exchangeable internal system, unit is suitable for booster pump systems, mechanical contractors, irrigation systems and HVAC liquid services.
Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.
Read More »
