New Opti Series Magnetic Grate Tube Meets Minimum and Measurable Threshold of Repeatable Magnetic Performance
The Opti™ Series Earth Magnetic Grate Tube are offered in Opti-B™, Opti-G™, Opti-H™ and Opti-P™ configurations with 9,500, 12,000 and 11,000 gauss. The units are designed for critical measurements for the specification, purchase, audit, verification and validation requirements for magnetic separation equipment. The Opti-B™ is suitable for abrasive applications and the Opti-H™ magnet...
Read More »
International Steel Service Center 'Direct Metals' Supplies Galvanized Bar Grating for Overpass Project
March 28, 2017 – Kennesaw, GA – Direct Metals, an international steel service center with locations in Kennesaw, GA and Waukegan, IL, recently supplied 914 sq. ft. of 1-1/2 x 3/16 Serrated Galvanized 19W4 Bar Grating from their Waukegan warehouse to Grayslake, IL for the village’s Washington Street overpass project. Direct Metals provided 22 unique part sizes of bar grating totaling 90...
Read More »
International Steel Service Center 'Direct Metals' Supplies Galvanized Metal Grating for Tinley Creek Forest Preserve Project
Kennesaw, GA – Direct Metals, an international steel service center with locations in Kennesaw, GA and Waukegan, IL, recently supplied 56 pieces of 2-1/2 x 3/16 7P4 Press Locked galvanized steel grating as part of the site improvement plans for Tinley Creek Forest Preserve in Cook County, IL. Counter sunk lands were used to mechanically fasten down the grating. The galvanized metal grating...
Read More »
Direct Metals Supplies Bar Grating for Historic Fourth Ward Project
Kennesaw, GA- – Direct Metals, an international steel service center with locations in Kennesaw, GA and Waukegan, IL, has provided serrated 7TW4 galvanized fabricated bar grating panels in the construction of an access ramp, platforms and stairs as part of Atlanta’s Historic Fourth Ward BeltLine project-a new greenspace for the neighborhood to gather. 57,000 lbs. and 139 pieces of 3/16 1-1/2...
Read More »
Choosing the Optimal IDC & Medical PPE Supplier
This white paper provides an in-depth overview into infectious disease control (IDC) medical PPE including development, key benefits, applications and product offerings.
Read More »Bedford Reinforced Plastics to Exhibit at 2015 POWER-GEN International in Las Vegas
BEDFORD, Pa. - Bedford Reinforced Plastics, a leading manufacturer of fiberglass-reinforced polymer (FRP) structural profiles, pultruded and molded grating, will be exhibiting at the 2015 POWER-GEN International in Las Vegas, Nevada at the Las Vegas Convention Center from December 8-10(th )in booth No. 2808. POWER-GEN International is the world's largest power generation event focusing on the...
Read More »Bedford Reinforced Plastics to Exhibit at 2015 LAGCOE Expo in Lafayette, Louisiana
BEDFORD, Pa. - Bedford Reinforced Plastics, a leading manufacturer of fiberglass-reinforced polymer (FRP) structural profiles, pultruded and molded grating, will be exhibiting at the 2015 Louisiana Gulf Coast Oil Exposition (LAGCOE) at the Cajundome and Convention Center in Lafayette, Louisiana from October 27-29. Held biennially since 1955, LAGCOE is one of the world's first oil and gas...
Read More »Bedford Reinforced Plastics to Exhibit at 2015 Railway Interchange Exhibition in Minneapolis, Minnesota
BEDFORD, Pa.,- - Bedford Reinforced Plastics, a leading manufacturer of fiberglass-reinforced polymer (FRP) structural profiles, pultruded and molded grating, will be exhibiting at the 2015 Railway Interchange Exhibition at the Minneapolis Convention Center in Minneapolis, Minnesota from October 4-7th. The Railway Interchange 2015 is the largest combined railway exhibition and technical...
Read More »Bedford Reinforced Plastics to Exhibit at 2015 WEFTEC Exhibition in Chicago, Illinois
BEDFORD, Pa. –- Bedford Reinforced Plastics, a leading manufacturer of fiberglass-reinforced polymer (FRP) structural profiles, pultruded and molded grating, will be exhibiting at the 2015 Water Environment Federation's Annual Technical Exhibition and Conference (WEFTEC-®) at McCormick Place in Chicago, Illinois from September 26-30th. Founded in 1928, WEFTEC has not only grown in the size of...
Read More »Bedford Reinforced Plastics to Exhibit at 2015 Offshore Technology Conference in Houston, Texas
BEDFORD, Pa.,- – Bedford Reinforced Plastics, a leading manufacturer of fiberglass-reinforced polymer (FRP) structural profiles, pultruded and molded grating, will be exhibiting at the 2015 Offshore Technology Conference (OTC2015) at NRG Park in Houston, Texas from May 4-7(th), 2015. Founded in 1969, the Offshore Technology Conference is the world's foremost event for the development of...
Read More »Retail Design - Going to Great Heights with Expanded Metal
When it comes to mountains and rock climbing, The North Face knows its peaks and valleys. So, it's no surprise that Gensler's San Francisco retail design team, when asked to create a store design for this outdoor apparel retailer, envisioned colossal rocks and steep slopes. After all, the store is named for the coldest side of a mountain. Now the store facade, which features a simulated mountain...
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »
