New Fluid & Gas Flow Equipment Products

Dewatering System offers automatic, continuous operation.

CONTIPRESS dewatering filtration system is available in 11 different sizes, and is suitable for dewatering slurries and suspensions. It operates at slow revolutions (0.5 to 2.0 RPM) producing very low noise level. Sludge cake that is produced after thickening, dewatering, and squeezing is continuously discharged; no manpower is necessary to operate system.

Hobas Pipe is made in pressure and non-pressure classes.

Hobas pipe is used for transmission of sewage, corrosive liquids, and wastewater. Centrifugally cast, fiberglass-reinforced polymer mortar pipe is resistant to both corrosion and ultra-violet attack. Its leak-free, push-together, gasket-sealed joints provide ease of installation. Standard 20 ft lengths require 1 support for each pipe section, and are available in all diameters. Hobas Pipe is...

UF Plant treats 250 GPD of mop water.

UF 250 ultrafiltration membrane system is designed to minimize disposal of oily wastewater for manufacturing facilities. System includes one, 180 gallon process tank with level controls; one, 50 gallon cleaning tank; and options such as transfer pump and free-oil removal separator. It is available as free standing component, or can be used in conjunction with existing waste treatment equipment....

Poppet Valves are solenoid operated.

Bronze StarÃ-® direct solenoid-operated 2-way poppet valves employ pulse width modulated solenoid electronics to extend solenoid life and reduce power usage. Constructed of non-corrosive bronze, brass, and stainless steel, valves are designed to operate from 29 in. mg vacuum to 500 psi air. Valves are available in NPT pipe sizes ranging from 1/4 to 2 in. Seal options are available to handle...

The Ultimate Guide To Hydra Pneumatic and Servo Cylinders

This white paper provides a guide to hydra pneumatic and servo cylinders.

Connectors and Adapters meet FCC Part 15 regulations.

TNC males with reverse threads include RT-1202-C crimp connector for RG-58/U cable and RT-1227 reverse thread TNC male to reverse thread TNC female right angle adapter. Reverse thread SMA females include RT-1142 adapter with reverse threaded SMA female on one end and standard BNC female on other end. Nickel plated RT-1005-C reverse thread N male crimp connector is for RG-58/U and gold plated...

Diaphragm Pump is pneumatically powered.

Toppa Series lightweight, injection molded drum/transfer pump is suitable for detergents, water treatment chemicals, plating solutions, or mildly aggressive chemicals. Wetted materials include polypropylene pump body and connections mated with TeflonÃ-® diaphragm. At its required 70 psi air supply, Toppa can deliver maximum head pressures of 5 bar (75 PSI), and maximum flow rates of 12 IPM...

Vacuum Systems operate quietly.

Omega-paK rotary lobe vacuum systems are available with full size enclosures or compact clamshell Vac-paKs. Systems are available with flows to 4500 icfm and vacuums to 15 in. hg.

Sealless Pumps have magnetic drive.

Texel MTA Series Pumps have chemically inert PFA lining for handling variety of process fluids including harsh chemicals or sensitive, ultra-pure fluids. Dovetail construction positively attaches casing lining to ductile iron armor to prevent separation above 212 Ã-ºF. Pumps' seamless, virgin PFA inner magnet lining eliminates leak paths that can lead to potentially dangerous process fluids...

Plugs and Connectors identify power status.

Power Light(TM) (PL) Plugs and Connectors glow through transparent lenses when power is ON. When devices are de-energized, and current is no longer present, power light switches OFF. Units are available in 15, 20 and 30 Amp 125 Volt straight-blade and locking configurations. 15 and 20 Amp straight-blade versions feature green neon bulb rated at 30,000 hours. 20 and 30 Amp locking devices feature...

Pinch Valves offer positive tube retention.

Available in either 2-way normally open or normally closed configurations with 12 or 24 VDC coils, Series EPK large-bore, solenoid-operated pinch valves are designed for use with 10 and 15 mm silicone tubing. Pressure ratings are .5 Bar (10mm ID) and .2 Bar (15mm ID). They are suitable for on/off fluid control applications or where replacement of wetted materials is advantageous. They feature...

ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services

J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!