New NPK 012 Swing-piston Pump Weighs 600g
Vacuum version reaches 25.8 in.Hg (140 mbar abs) and has a maximum flow rate of 13.5 L/min. Pressure version delivers up to 36 psig (2.5 bar) of continuous positive pressure and up to 72 psig (5 bar). Ideal for medical inhalation therapy devices, sprayers, pick-and-place vacuum equipment and pneumatic actuations.
Read More »
Grauling Research is Now an Official Reseller of Welch® Vacuum - Gardner Denver Pumps & Products
SANTA ROSA, CA -– Nov. 7, 2018 -– Grauling Research, Inc. (www.graulingresearch.com) announces a new reseller arrangement with Welch® Vacuum - Gardner Denver (www.welchvacuum.com), a leading global supplier of vacuum pumps for industrial, laboratory, and educational applications. Grauling Research, Inc. is now an authorized reseller for the Welch product line. David W. Gray,...
Read More »
New D1 Axial Piston Pumps are Designed for Open Circuit Systems in Extreme Application Environments
Danfoss’ D1 Axial Piston Pumps are offered with four displacement options in 130-260 cc and pressure, load sense, power limiting and displacement controls. Suitable for use in mining, heavy duty construction, forestry, material handling and marine applications, units provide an output pressure of up to 5075 psi (continuously) and 5800 psi (intermittently). D1 pumps are equipped with integral...
Read More »
New D1 High Power Axial Piston Pump is Designed for Extreme Application Environments
D1 Open Circuit High Power Axial Piston Pump is suitable for offshore, marine, and oil and gas markets. Unit comes with four displacement options in 130-260cc, pressure, load sense, power limiting and displacement controls. The pump delivers an output pressure of up to 350 bar continuously and 420 bar intermittently. Unit with integral charge pump allows it to run at speeds up to 2500 rpm.
Read More »
An Introduction to Plastic Injection Molding
We developed this eBook with designers, engineers and purchasing specialists in mind. It is written to provide a basic understanding of plastic injection molding presses, processes and costs. Our goal is to make our customers more knowledgeable about what goes into making a plastic part.
Read More »
Apollo-AC Electric Piston Pump™ requires low maintenance.
Apollo-AC Electric Piston Pump™ is offered in 101 and 102 models. These units are equipped with 3/8 HP, 24v DC motor that can be installed at any angle horizontal. Model 101 is operated at depths of 122 m with flows of 4.1 lpm whereas 102 at depths to 53.3 m and flows up to 10.2 lpm.
Read More »
MP1 Piston Pumps improves connectivity and data capture options.
MP1 Closed Circuit Axial Piston Pumps are designed for compact wheel loaders, dumpers, sweepers and telehandlers. Units are available in frame sizes 28/32 and 38/45cm³. Pumps are enabled with non-feedback proportional electric (NFPE) control option. Pumps improve efficiency in aligning Tier IV and stage 5 compliant engines and are combined with Danfoss software.
Read More »
TopDrive™ Piston Pump comes with control panel design.
Featuring fully-interchangeable drive assembly and interchangeable lower pump, TopDrive™ Piston Pump allows higher flow rate and adjustable drop assembly with 5 or 10-foot lengths. Allowing transitions between hand, solar, electric and pneumatic pumping, unit can be paired with patented well seals. Product is suitable for landfills and cleanup applications.
Read More »
Q155 Series Quintuplex Pumps eliminate hazardous VOC emissions.
Q155 Series Quintuplex Pumps are suitable in Reverse Osmosis in water and wastewater treatment, mine dewatering, salt water disposal and salt water injection applications. Available in two models Q155K and Q155M with maximum flow rate of 78 gpm and 65 gpm respectively. Units feature multiple-diaphragm design for virtually pulse-free and linear flow. Having 3000 psi and 3500 psi discharge...
Read More »
K2 Axial Piston Pumps are equipped with fan drive control.
Suitable for agriculture, construction, road-building, material-handling, forestry, and turf-care industries, K2 Axial Piston Pumps feature quieter pump design for allowing dissipation of noise and vibration. Designed with modular endcaps for increased flexibility in installations, product comes with 30 percent reduced weight. Unit provides maximum efficiency with reduced length and width by up...
Read More »
A4V Series Piston Pumps are fully tested and documented.
Available in displacements of 40, 71, 125, 180, and 250 in SAE or metric type, A4V Series Piston Pumps come with DR, DRG, FR, FRG, DFR, and LR2 controls and are used in different applications.
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
