Spray and Faucet Heads

Rotary Spray Head maximizes cleaning efficiency.
Spray and Faucet Heads

Rotary Spray Head maximizes cleaning efficiency.

Starting to rotate at pressures of less than 0.1 bar, Toftejorg SaniMidget SB ensures dynamic and effective distribution of rinse water to inner tank surfaces. As head rotates, fans produce impact on tank wall and well-distributed falling film without cascading flow that can be experienced with static spray balls. Made of non-reactive and hygienic materials, head is self-draining and...

Read More »
Spray and Faucet Heads

AM Conservation Provides New Products for Kansas Community Educational Campaign to Help Promote Water Conservation

When the small town of Russell, Kansas entered Stage 4 Water Restriction in August 2012, the community was facing serious water supply shortages. Russell's 4,000 residents rely on two sources for their water, so when the first became unusable, the city was forced to rely almost exclusively on their secondary water source. Russell has made several moves toward increased water conservation,...

Read More »

Bradley's Swing-Activated Halo(TM) Eye/Face Wash Solutions Named a 2013 New Product of the Year Winner by OH&S Magazine
Spray and Faucet Heads

Bradley's Swing-Activated Halo(TM) Eye/Face Wash Solutions Named a 2013 New Product of the Year Winner by OH&S Magazine

MENOMONEE FALLS, Wis. – Bradley Corporation's Swing-Activated Halo™ Eye/Face Wash Solutions earned a winning spot in the 2013 New Product of the Year Contest held by Occupational Health & Safety magazine. All of Bradley's Swing-Activated Eye and Eye/Face Wash Solutions now include the innovative HALO eye and eye/face wash sprayhead. It offers a superior wash pattern for the most effective...

Read More »
How to Effectively and Efficiently Clean Heat Exchangers, Part I
Sponsored

How to Effectively and Efficiently Clean Heat Exchangers, Part I

For refineries and petrochemical plants, cleaning heat exchangers is a dirty job but somebody has to do it. While there are many approaches on how to clean shell and tube heat exchangers, it is indisputable that the right method is absolutely critical for ensuring that equipment is fully operational. Otherwise, you could end up with a potential equipment shutdown, which will cost you time and money. In this three-part series, you will learn about the various benefits, methods, and obstacles involved in heat exchanger cleaning. Part one introduces the fundamentals of cleaning, as well as explores the pros and cons of on-site versus off-site services. Download the first of this three series to assist you in finding the best solution for your dirty job here.

Read More »
Storage Facility Sprinkler features K factor of 22.4 (320).
Spray and Faucet Heads

Storage Facility Sprinkler features K factor of 22.4 (320).

Available with 165° and 205°F temperature ratings, model VK506 Early Suppression Fast Response (ESFR) pendent sprinkler is intended for use in warehouses and other storage applications. Product is cULus Listed and FM Approved for buildings up to 45 ft high and storage heights up to 40 ft, without use of in-rack sprinklers, and can be installed with deflector located 6–18 in. below ceiling....

Read More »
Fire Protection Products facilitate inspection.
Spray and Faucet Heads

Fire Protection Products facilitate inspection.

Designed for home sprinkler systems, Residential Fire Protection line includes RF PEX(TM) Tubing, which features distinctive orange stripe, enabling inspectors to visually follow tubing throughout installation. Line also includes Lead Free PEX(TM) Fittings and Lead Free RF PEX(TM) Sprinkler Fittings, which accept all standard ½ in. residential sprinkler heads and will work with variety of...

Read More »

Custom Fabrication of Lances, Headers, Injectors and More
Spray and Faucet Heads

Custom Fabrication of Lances, Headers, Injectors and More

Custom design and fabrication services to ensure optimal spray system performance are available from Spraying Systems Co. Spray lances, injectors, quills, manifolds, headers and showers that supply liquid and air/gas to spray nozzles are among the fabricated products offered by the company. Proper delivery of the sprayed liquid to the nozzles is important in overall system performance and working...

Read More »
Spray Head features self-rotating UHP water jet action.
Spray and Faucet Heads

Spray Head features self-rotating UHP water jet action.

Using standard lance, SPIN-NOZZLE® Viper 40(TM) rotates by reaction energy of water, eliminating need for specially designed lance and separate air source. Accessory operates at pressures from 24,000-40,000 psi, with max flow of 6 gpm, and can be repaired in-field in under 5 min with rebuild kit. Stainless steel head features 2 carbide and sapphire nozzle inserts rotating at up to 5,000 rpm;...

Read More »
Water Jet Head operates at 5,000-24,000 psi.
Spray and Faucet Heads

Water Jet Head operates at 5,000-24,000 psi.

Stainless steel, SPIN-NOZZLE® Viper 24(TM) features cylindrical design that helps avoid bumps as it rotates on end of water jetting lance. Head is threaded to accept 2 nozzles, which are flush-mounted to minimize impact. Viper 24 rotates by reaction energy of high-pressure water it delivers, without any external driver, turning any standard lance into water jetting tool. Lances rated at 10,000...

Read More »

All Topics