New Fluid & Gas Flow Equipment Products

Submersible Pumps provide round-the-clock operation.

Available from 1/2 to 100 hp, portable drainage pumps feature stainless steel casings and anti-corrosion protection. They convert between normal, high, and low head versions as operating conditions change. Double mechanical shaft seal in white oil bath keeps pumps running in harsh conditions. Adjustable wear parts, covered with nitrile rubber keep tolerance tight. Pumps include built-in...

Portable Collector provides 382 sq ft of media.

Rated at 1000 CFM, PortaAir(TM) has 1 1/2 HP motor and backward inclined fan that generates high suction at intake hood, even with dirty filters. Unit collects airborne contaminants with integral 11 ft, 8 in. dia, 360 deg rotating, externally supported arm, and deposits it in 2 pleated cartridge filters rated at 99.8% efficiency. Collector has 16 ga welded galvanized steel body; two 8 in....

Vacuum offers 99.997% filtration efficiency.

P300 portable dust extraction unit has manual reverse pulse filter cleaning system with filter life of 6,000 to 8,000 hr. It includes automatic start/stop for pneumatic tools, noise reducer, adjustable handle, and 4 wheels. Unit operates on 110 to 120 V and is suitable for cleaning workshops, on-tool extraction of grinding and sanding dust, and on-torch welding fume extraction.

Sealing Fittings allow long conduit runs.

EYAX expanded fill sealing fittings allow 6 wires, resulting in 40% fill, and makes possible uninterrupted runs in IMC or rigid conduit systems. They eliminate need for oversized fittings and reducing bushings. Fittings have smooth integral hub bushings to prevent insulation damage and enlarged access opening that facilitates faster, easier, and more accurate wire separation. Fittings are UL(R)...

NVH Materials Guide

Noise, Vibration, and Harshness (NVH) refers to the study of noise and vibration for the purpose of modifying equipment for quieter, safer operation.

Duct Systems are made of CPVC.

Corzan(R) CPVC duct systems exhaust volatile fumes and exhibit resistance to chemical attack. Manufactured in pipe sizes from 6 to 24 in. diameters, ducting offers working temperature of 200 deg F and fire resistant properties. It can be connected with fume scrubbers or other emission control equipment. Applications include pulp and paper, metals finishing, water and wastewater treatment,...

Flexible Connectors handle plant piping.

Severe and Moderate Service Design Connectors are suitable for plant piping systems, heating/ventilation/air conditioning systems in chemical environments, and food and drug processing. Available with rigid or flexible linkage in standard sizes of 1 to 14 in., connectors have a deep-well with uniform walls for increased strength and long flex life. Three limit bolts are shrouded in UHMW...

Filter never needs to go off-line for backwashing.

CYCLOSPRAY(R) Filter's internal cleaning shower continuously removes captured particulate matter from filter media. Continuous cleaning allows CYCLOSPRAY(R) to handle solids up to 5000 ppm. At larger mesh sizes, CYCLOSPRAY(R) can handle flow rates of up to 300 gpm. Positive filtration device provides absolute barrier against suspended solids and is available with mesh sizes as small as 1 micron.

Separation System suits septage, food, and pulp products.

SPIRALIFT(TM) SR receives, screens, and separates solids from liquids. It incorporates fine screening shaftless screw system, spray wash, optional press zone, and integrated controls. System is housed in stainless steel tank enclosure with quick disconnect inlet flange for connection to septage trucks. Automatic inlet valve regulates internal fluid level. SPIRALIFT SR is available with one, 2,...

Control Valves suit corrosive environments.

Hi-Cyclic(R) directional control valves are constructed of corrosion resistant solid brass with stainless steel spool. They are available in direct ported or manifold mount body styles with 8 spool configurations in sizes from 1/8 through 1/2 in. NPT or SAE ports. With operating pressure of 3000 psi, valves have max length of 2 1/4 in. and max body height of 2 5/8 in. Unit provides a low...

Air Compressor can be hand carried.

Portable AC1-HE02-05M has 2.0 hp 120 V electric engine, single stage compressor, and thermal overload motor protection. Twin tank is powder coated and has 5 gal capacity, drain valves, pressure release valve, and quick connect fittings. Rubber handles provide better grip. Compact design allows for easy transportation to any job site.

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.