New Fluid & Gas Flow Equipment Products

Connector System eliminates wire stripping.

MTA-50 family of insulation displacement contact (IDC) style connectors have 0.050 in. contact centerlines in single, staggered row. This reduces board space for wire-to-board connectors while simplifying wire termination. Pre-loaded IDC contacts eliminate need for wire stripping and accommodate manual or semi-automatic assembly. Connectors are available in 2 to 28 contact positions and accept 26...

Adjustable Air Amplifier can pick and place porous parts.

CDF Series combination vacuum pump and cup generates high vacuum flow suitable for picking up light, porous objects such as open celled foam, fabric, fibrous paper products, and stenciled or screen printed circuit boards. It operates on Coanda Effect, where small volume of compressed air is converted into large flow of ambient air. Amplifiers are available in 7 standard models with internal bores...

Wastewater Evaporator eliminates discharge to drain or sewer.

HYDRO-VAP(TM) 1000E runs at 3 to 4 gph to provide 95% reduction in wastewater. Evaporator heats wastewater to boiling and turns it into vapor. Harmless water vapor is vented through blower-assisted stack and exhausted to outside atmosphere.

Centrifugal Pump provides leak-free operation.

Sealless RD Series provides constant flow over wide range of pressures up to 15 psi. It has brushless 24 Vdc motor and can be located close to fluid reservoir. Quiet running, and rated for over 25,000 hours operation, canned-motor pump directly drives rotor magnet incorporating impeller. Casing completely seals pump chamber from exterior. Flow rates range from 1.1 to 5.3 GPM in footprints from...

Top Purchasing Considerations for Cold Storage Units

On-site cold storage is essential in a number of industries. A new walk-in cooler, walk-in freezer or refrigerated trailer is a major investment and having one that fits your specific needs is crucial.

Micro-Miniature Valves suit automated liquid handling equipment.

Inert solenoid operated isolation valves are 3/8 in. in diameter, allowing up to 4 manifold mounted valves to fit in 1 1/4 in. square space. Two-way, normally closed valves come in 3 body designs. Two incorporate rectangular body with 1/4-28 flat bottom ports on bottom or side. Manifold version has screw-in collar for easy assembly and exchange. Valves are constructed of PEEK or PPS with Teflon...

Fume Extraction Arm suits heavy duty use.

NEX HD Arm is made with aluminum hood, 8 in. dia high temperature hose, and external support system. It is designed for heavy duty welding and plasma cutting operations where extreme heat resistance is necessary. Horizontally articulated swivel, horizontally pivoted boom, and vertically pivoted supporting arm provide mobility over entire working range of arm. Arm is available in lengths of 7, 10,...

Air Compressor offers hand-carry portability.

Gasoline-powered AC1-HR45-05M utilizes 4.5 HP Robin OHC engine and features single-stage compressor, powder-coated 5 gal capacity tank, drain valves, and pressure-release valve. Head and crankcase are aluminum, and cylinder is cast iron. Motor and pump have protective housing. Unit includes 2-handled system for one- or two-man transporting.

End Mills machine broad range of materials.

Manufactured from premium M42 Cobalt steel, Roughing End Mills can be used to machine steel, stainless steel, titanium, cast iron, nickel, copper, aluminum, and magnesium. They have all-ground roughing profile with center cutting end tooth geometry that allows for plunging and profiling. Uncoated, TiCN and TiCN surface finishes are available. APPLIX(R) MX Series DIN overall length production taps...

Air Compressor connects to direct gear motor.

30-40-50 DG industrial electric-driven rotary screw air compressor is available in 30-50 hp models that are directly coupled to motor for positive alignment. It is equipped with air pressure gauge, hour meter, discharge temperature gauge, oil filter, and separator element differential gauges. Discharge pipe is steel braided flexible pipe. Large air intake has oversize multi-stage dry type...

ANSI Pumps handle dirty and reclaim process fluids.

Stan-Cor Series non-metallic centrifugal pumps are suited for pumping abrasive and corrosive process fluids. They provide total dynamic head to 350 ft and flow rates to 700 GPM. Solid Kynar or Teflon(R) pump head provides chemical compatibility and abrasion resistance. They are equipped with concentric casing designs, heavy-duty drive shaft, and duplex contact thrust bearings.

Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application

Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.