New Fluid & Gas Flow Equipment Products

Metering Pump offers sub-microliter dispensing.

Utilizing CeramPumpÃ-® valveless piston pumping principle, Model SMTRH provides ultra-low volume, sub-microliter dispensing. Pump is driven by precision stepper motor and will dispense from 500 nL to 5 Ã-µL. Piston stroke displacement is adjusted using flow control ring graduated in 450 divisions. Low dead volume pump head design ensures maximum bubble clearing and provides typical stroke...

Pre-Filter Separator cleans diesel fuel systems.

Fuel Purifier deals with raw contaminants that lead to degradation, oxidation, and repolymerization of fuel. Single-step unit removes 99% of water and 95% of dust, dirt, and other contaminates found in all diesel fuel. Product cleans fuel without use of replaceable, changeable, or cleanable filter elements by continually pre-filtering and polishing fuel. There are 7 models available with flow...

Wastewater Evaporator suits metalworking industry.

Natural gas-heated HBG wastewater evaporator, also adaptable for liquid propane, has double-lid design that facilitates access to tank. Using refractory ceramic, combustion box requires 390,000 BTU/hr to evaporate up to 30 gph. Product, suited for handling industrial wastewater and managing non-hazardous waste streams, provides one-step process that can reduce waste stream by concentrating it up...

Metering Products produce varying densities of foam.

Hydraulic Driven 2-Position Orifices for Multi-Density Metering(TM) Technology switches mix head between 2 different throughputs/ratios. High and low throughput positions are programmed into shot profile data on machine. Hydraulic Operated 2-Position Clean-out Piston allows mix head to be tuned for optimal mixing with stops to lock in alternate settings. Servo Controlled Clean-out Piston allows...

There's More to Plating than You Zinc!

To find out more about the seven demands you should make of your zinc plater, download now.

Control Valve conforms to ANSI B 16.34 and ASME VIII.

Available in sizes from 1-8 in., C Series control valves offer pressure ratings conforming to ANSI 300 and ANSI 600, and come in carbon steel, alloy steel, or stainless steel body materials. Cage-guided balanced plug provides control over high differential pressures, and 1-, 2- and 3-stage designs are offered to minimize cavitation and aerodynamic noise. Modular structure enables single valve...

Peristaltic Pump features direct-coupled design.

Available 25-100 mm sizes, SPX32 can pump harsh materials and will not vapor lock. Unaffected by abrasive nature of sludge, corrosive acids, and gaseous chemicals, unit incorporates leak zone that protects drive and self-loading design that facilitates hose changing operations. Design allows for drive removal and replacement without dismantling pump head, and 2-bearing rotor absorbs forces...

Peristaltic Pump is used in ferric sulfate treatment.

Used for metering ferric chloride into raw water, 624 U/RE wastewater treatment solution offers vacuum lift, dry priming capability with no possibility of back-flow. Design utilizes twin rollers, providing flow rates from 0.05-12.0 Lpm. Pump accommodates fluctuations in water demand and offers manual speed control, remote switching options, and digital speed display. IP55 rating ensures unit is...

Assembly Monitor offers true error-proofing capability.

Model TS III(TM) Qualifier eliminates many common fastener-related assembly errors. Integrated power supply can be used with dc brush or brushless screwdrivers. When used with electric torque control driver, it can determine if each screw in assembly has been inserted, driven to full depth, torqued to designated value, cross threaded, or stripped. Automatic calibration allows unit to...

Air Flow Pump suits stationary and mobile applications.

Series 6000 Linear Pump incorporates low-voltage dc motor that makes it suitable for medical, environmental, laboratory, office machine, and other stationary and mobile applications. Pump provides up to 1.5 cfm air flow as standard. Maximum pressure is rated at 4.0 psi continuous or 4.7 psi intermittent. Maximum vacuum rating is 8 in. Hg. Intake heads, constructed of high density sound-absorbing...

Sanitary Valve is suited for pharmaceutical industry.

Model SR-800 (Sanitary RAM-800) employs piston design that uses O-rings behind TeflonÃ-® wall and has no interior spaces where liquids and foreign matter could accumulate. Valve body is constructed of BPE and 3A compliant, 316 stainless steel, and can be autoclaved. Rated for 150 psig product meets ASME BPE-2002 standard requirements and operates in temperatures from 32-300Ã-

Von Ruden's Driven Tools Are Built to Last

Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.