New Fluid & Gas Flow Equipment Products

Pump utilizes Diaphragm Position Control technology.

Series H/G25 Kel-CellÃ-® uses DPC technology to control diaphragm position under adverse inlet conditions. This reduces possibility of incidental diaphragm failure/rupture caused by conditions that result in excessive vacuum conditions on pump inlet. Industrial pump provides flow to 20 gpm and pressure to 1,000 psi.

Water Injector provides battery watering solution.

Water Injector ClampLock(TM) single point watering system features same internal mechanism as Injector Premier(TM), enabling do-it-yourself custom installations. It uses barbed fittings to attach water tubing to each Injector. Spin-welded into one piece, product resists chemical build-up that occurs in batteries. System is packaged to include 120 ClampLock Injectors, 10 Terminating Injectors, 10...

Depth Filter Cartridge has spiral design for optimal flow.

DeltaMax(TM) absolute-rated, all-polypropylene filter employs design with gradient pore structure that optimizes flow rate. It is made without surfactants, lubricants, resin binders, adhesives, antistatic or release agents, or other additives. Available with removal ratings of 0.5, 1, 3, 5, 10, 20, 40, and 70 Ã-µm, product comes in lengths from 10-40 in. with configurations to fit existing...

Double-Motion Agitator is suited for viscous products.

Double-Motion Agitator handles product batches with material viscosity up to 2 million centipoise. Vessel is designed with crossbars that rotate in opposite direction and scrapers that clean inside vessel walls. Additional features include pressure/vacuum, trunnion tilt, piggyback drive, and sizing from pilot lab to 6,000 gal. Applications vary from low-viscosity soups to heavy refried beans.

The Benefits of Safety Grating Over Similar Options

In this eBook, discussed are the factors to consider when choosing the right safety grating for your application and details about the varieties offered by Metalex.

Swing Check Valves suit dry bulk transfer carriers.

Line of 3 and 4 in. swing check valves protects food-grade and dry bulk contents at temperatures to 350Ã-

Two-Way Solenoid Valves range in size from -¼-3 in.

Available in bronze or stainless steel, 2-way Solenoid Valves control flow of water, oil, gas, steam, brine, solvents, cryogenics, and oxygen. They feature packless construction with continuous duty coils for all voltages. Units are offered normally open or normally closed with pressures to 500 psig and operating temperature to 400Ã-

Vacuum Lift Tilt Adapter minimizes effort of tilting loads.

EZ-Tilt Adapter bolts onto air-, electric-, and battery-powered vacuum lifters and is self-locking in both vertical and horizontal positions to keep loads from moving. Equipped with handlebar for added leverage, adapter eliminates latches or pinch points. Offset bale attachment is available for further balancing loads. EZ-Tilt Adapter is suited for lifting and tilting stone slabs as well as large...

Rupture Disks feature vacuum support design.

For processes that operate under vacuum conditions, rupture disks with vacuum support ensure that disk does not collapse under differential back-pressure and operates correctly. One-piece vacuum support eliminates potential failure sites and has smooth design that reduces accumulation. Rupture disks are suited for agricultural/bulk powder, aerospace, chemical, gas, petroleum, pharmaceutical, and...

Linesets come in more than 1,000 combinations.

CerroSet(TM) Linesets, available in combinations based on tube diameter, insulation thickness, end finish, and refrigerants, may be used in conjunction with split system air conditioning and heat pumps. Specialty linesets are available for icemakers, split system air conditioning, and chilled water systems. Both come in lengths from 10-60 ft in 5 ft intervals. Standard linesets are purged with...

Air Purifying Respirators optimize user comfort.

PeakFit(TM) Respirators are NIOSH approved N95 masks with large contoured design that facilitates breathing and minimizes worker fatigue. Pre-shaped, molded nose bridge fits virtually any facial contour. Soft, closed-cell foam on inside of mask helps to ensure wearer comfort, and design of mask's adjustable, latex-free, cloth head strap allows for custom fit. All PeakFit(TM) models provide...

ISO-Certified Plastic Injection Molding from Rodon

The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.