New Fluid & Gas Flow Equipment Products

Binks Offers Range of Pumps for Varied Finishing Applications

December, 2006 - Glendale Heights, IL -- Binks offers a full range of spray finishing pumps, each designed for maximum durability and dependability. The Binks Exel(TM) Pump -- used for catalyzed coatings, high solids coatings, abrasive materials, solvent- and water-borne fluids, moisture sensitive materials and UV-cure coatings - are self-priming and offer accessible parts replacement. (Cartridge...

Lynx Mold Mount Piezo Adapter

RJG announces the release of the Lynx Mold Mount Piezo Adapter. The Lynx Mold Mount Piezo Adapter can be used to interface the eDART System(TM) with all major manufacturers' piezoelectric sensors. By mounting to the mold, customers avoid the use of costly extension cables and reduce the opportunity for connector contamination (a major source of problems with piezoelectric sensors). The potential...

Metal Pump features 3 in. max solids passage.

Along with bolted construction, T1510 Advanced(TM) Brahma(TM) pump has top inlet design and uses flap valve technology to allow passage of large solids. Bottom discharge and flow-through design prevent settled solids from damaging pump internals upon restart. Turbo-Flo(TM) air distribution system, which is completely submersible, allows pump to be used in harsh environments. Constructed with...

Disposable Filter Assembly is available gamma-irradiated.

Suited for liquid, gas, and vent applications, UltraCapÃ-® H.D. (Heavy Duty) is optimized for continuous and batch processing in biomanufacturing operations as well as final and prefiltration in pharmaceutical applications. T-style sanitary flange inlet and outlet connections offer filter media removal ratings from 0.04-100 Ã-µm. Available with choice of membrane and media material,...

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Roller Pumps withstand harsh chemical exposure.

Offered with standard counter-clockwise rotation or optional clockwise rotation, 7000 Diamond Series(TM) Round-upÃ-® Ready Roller Pumps feature alloy body and end plate that withstand extended exposure to harsh agricultural chemicals. Series employs 416 stainless steel shafts, heavy-duty sealed bearings, and Buna-N seal ring. These 7-roller pumps offer max flow output of 22.5 gpm @ 850 rpm...

Fluid Valve provides precise on-off flow control.

Suited for medium to high-viscosity fluids, pneumatically actuated No-DripÃ-® Model 2600-060 features wear-resistant fluid seals, carbide seat, and tungsten-carbide ball-end needle with anti-abrasive, hard-coated shaft. Valve body has three 3/8 NPT inlet fluid ports and 3/8 NPT outlet port. Dowel and screw holes allow in-line or surface mounting. Rated for 5,000 psi, valve can be used to...

Proportional Control Valves handle gases and liquids.

Offered in brass or stainless steel, KFPV050 Series direct-acting, 2-port plunger valves provide stepless variable control of gases and liquids. Solenoid can be oriented 360Ã-

NPT Valves and Fittings suit high-pressure environments.

Designed for safe plumbing, NPT valves and fittings are made of 316 stainless steel. Pipe connection valves come in 2-way straight and 2-way angle body configurations, in 1/8, Ã-¼, 3/8, Ã-½, Ã-¾, and 1 in. sizes, and are engineered for optimal repeatable quality. Fittings, available as elbows, tees, and crosses, accommodate 10,000 or 15,000 psi and all above-listed NPT tubing...

Bursting Disk is designed for low-pressure applications.

Intended for liquid, gas, or vapor applications from 2 psig, Opti-Gard(TM) SoLo reverse-acting bursting disk features 95% operating-to-burst pressure ratio and 3% performance tolerance. Unit comes pre-fitted with integral Flo-Tel(TM) non-invasive, magnetic burst-detection system, which is fail-safe and operates only when disk has ruptured. Standard construction is of corrosion-resistant...

Bypass Valve controls excess flow in hydronic systems.

Designed for systems where heating loads may be excluded from circuit as zone valves close, Differential Bypass Valve helps minimize velocity noise caused by excess flow through circuits while maintaining pump head at constant valve. Unit features all brass body with non-ferrous internals and Ã-¾ in. connection. Installed horizontally or vertically, valve has max working pressure of 150 psig...

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.