2- and 3-Way Solenoid Valve is suitable for corrosive fluids.
Miniature Isolation Valve is rated up to 35 PSI, Cv=.05. It is availabe in 12 VDC and 24 VDC models, normally open or normally closed with numerous port options. Materials in contact with flow path are limited to PEEK and EPDM or FKM-GF. Seat and diaphragm design provides long life exceeding 15 million cycles.
Read More »
Microwave Relay works at speeds up to 6 GHz.
MW3HP, MW4HP and MW6HP microwave frequency relays have 3, 4 and 6 GHz capabilities respectively, work in temperatures of -65 to +125 Ã-ºC, and withstand 30 G vibration and 100 G shocks. At 6 GHz, modules have 18 dB signal isolation, stable insertion loss of 0.38 dB, and VSWR of 1.30:1. Applications include precision test equipment, and aerospace and military communication systems. PCB...
Read More »
Panel-Mount Isolation Valves measure 42.7 x 25 mm.
Two or three-way STV-K-1 Molded PEEK Solenoid Operated Isolation Valves feature abrasion-resistant valve seats, 20 mm diameter solenoid coils, and PTFE isolation diaphragms. Perfluor elastomer valve seats provide chemical resistance. STV-K-1 valves are tolerant to particulate in flow streams. Rated for continuous duty, valves operate on 12 or 24 Vdc power, and are available with 1.8 mm orifice...
Read More »
Process Diaphragm Pumps provide smooth output.
LEWAtriplex(TM) Monoblock Leak-Free Process Diaphragm Pumps feature 1 crankshaft with cams machined to 120Ã-
Read More »
Increasing Workplace Safety with Beryllium Medical Surveillance
To learn more about how you can develop a workplace safety plan that follows OSHA regulations and fits your company's specific needs, download now.
Read More »
Ball Valves handle corrosive and high-purity media.
Tufline full-port lined ball valves feature metal-to-metal body joint that controls compression of lining for heat and stress cracking resistance. Cast-in recesses and machined grooves lock lining to valve body and ball, making lining blow-out virtually impossible. Lining is unpigmented, chemically-inert virgin PFA. Both full-port and standard-port models conform to ANSI B16.10 dimensional...
Read More »
Isolation Valve mounts directly on manifold.
Two-way solenoid valve mounts on manifold, is rated up to 35 psi with Cv of 0.05, and is available in 12 and 24 Vdc models, in normally open or normally closed versions. Materials in contact with flow path are limited to PEEK (polyetheretherketone) and EPDM (ethylene propylene) or FKM (highly-fluorinated fluorocarbon). Applications include blood analysis, clinical chemistry, DNA processing,...
Read More »
Inert Valve controls corrosive or high-purity fluids.
Solenoid-operated IPV inert proportional diaphragm isolation valve can be used in medical equipment, water purification and clinical chemistry industries. Materials of all surfaces in flow path are inert and impervious to wide range of aggressive fluids. Valve provides infinitely variable flow control, is rated to 60 psi, and has 24 Vdc driver. Poppet and seat are configured to provide bubble...
Read More »
Inert Diaphragm Valve handles aggressive fluids.
Three-way IDV solenoid-operated diaphragm isolation valve works with fluids found in medical equipment, water purification and clinical chemistry industries. Materials of all surfaces in flow path are inert and impervious to many aggressive fluids. Valve is typically used in waste circuits where valve must tolerate high contaminant levels. Valve is rated 35 psi with Cv of 0.22 and is available in...
Read More »
Ultrasonic Positioner measures travel of valve blade.
EP 2000 compares valve position to valve control signal, and provides valve open, valve closed, positioner start, positioner stop, and valve blade not in position indications. It works with 4 to 20 mA signal from DCS system, where at 4 mA signal valve is completely closed, at 20 mA completely open. Probe can also be trained to use 4 to 20 mA signal for partially opening and closing valve.
Read More »
Through-port Valves control and shut off flow.
Stargate-O-Port valves work with ultrasonic positioner to control flow. Different port and orifice shapes allow selecting certain characteristics of flow cross section and blade position. Valves also serve as line blind in maintenance situations, to take out pipes and set blank flanges for safety. They have tight class VI shut-off which allows operators to close valve, inset locking pin and pad...
Read More »
Precision Machined Parts for High Tech Applications
For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.
Read More »
