New Fluid & Gas Flow Equipment Products

Sigma Screw Compressors offer sigma frequency control.

Sigma Screw Compressors with Sigma Frequency Control (SFC) are available with 100-215 hp and flows from 130-1001 cfm to provide pressures from 80-145 psig. Direct drive airend/motor package is designed to provide 20-100% efficiency over its entire speed range. SFC can run fully loaded for indefinite periods of time. SFC compressor packages feature sound dampening enclosures, EPAct compliant...

Grinding Disc handles stainless steel parts.

Tiger Disc provides higher cut rates and has 50-65% more abrasive cloth per disc than conventional zirconium discs. It has abrasive cloth suitable for cool-cutting stainless steel, prevents dulling and glazing of abrasive grains, and has flat configuration for smooth grinding action. Disc is available in 4.5 and 7 in. dia, with and without nuts, and in grit sizes of 60 grit for maximum cut rate...

Solenoid Valves meet high purity manufacturing requirements.

Series 50 two-way, normally closed valves have all-welded components, 430F stainless steel construction, and 1/8 or 1/4 in. O.D. SS welded tubing for port connections. Sleeve assemblies can be attached with threads and elastomeric seals or with body welded directly to sleeve assembly. Grommet and conduit-style housings are available. Valves meet requirements for chip manufacturing, analysis...

Water Pumps can be used in harsh environments.

Seal-Less 47 Frame water circulation pumps have re-engineered bearing system that increases rated service life to 60,000 hours of continuous duty. Pump is constructed of brass, and is available in 12 and 24 Vdc versions with identical flow ratings and multiple inlet and outlet configurations. Seal-Less pumps are magnetically coupled, eliminating all seals and inherent seal leakage.

5 Reasons Why Preventative Maintenance is Essential for Your Air System

Discover essential preventative maintenance techniques for keeping your air system in good shape and avoiding costly repairs.

Tiny Relay switches up to 20 A.

Subminiature AZ9471 PCB power relay has footprint of only 0.295 sq in., yet it can switch 20 A motor, carry up to 35 A for 2 min, and withstand inrush of 40 A. With silver tin oxide contacts, it can withstand inrush of 60 A. Coil voltages range from 6 to 24 V, and power consumption is 0.6 W. Relay is epoxy sealed for automatic wave soldering.

Solenoid Valve is suitable for hazardous locations.

Normally closed, 3-way solenoid valve is explosion-proof and UL listed. Body is made from brass, and seals and seat are Buna N. Soft-seated poppet design provides bubble-tight sealing in air applications. Valve can operate safely in temperatures from 0 to 104Ã-

Sensing and Timing Relay is capable of dual timing.

Series ST Sensing and Timing relay is used for level sensing applications that need to detect 1 level of a liquid. Features include optional ON-DELAY, OFF-DELAY or SINGLE SHOT timing; 115 VAC input; transformer isolated sensing circuit; and voltage protected sensing input. Resistance sensing is rated at up to 10 Megohms. Additional features include sensing and output LED indicators, 10 AMP SPDT...

Relief Valve is suitable for cryogenic service.

RSL Safety Relief Valve features TeflonÃ-® seat, bronze body and stainless steel spring. It is 02 cleaned for oxygen service in compliance with CGA specification G-4.1. Valve is available in sizes 1/2 to 2 in. and is suitable for pressures to 300 psig and temperatures from cryogenic to 300Ã-

Board Stackers offer design flexibility.

On .100 in. pitch, single, double and triple row through-hole headers (MTSW Series) and stackers (ZW Series), surface mount board stackers (HW Series) and shrouded headers (ZSS Series) are available for board stacking. For micro pitch, board stackers are available on .8mm pitch (AW Series), 1mm pitch (MW Series), .050 in. pitch (FW Series), .050 in. x .100 in. pitch (DWM Series) and 2mm pitch (TW...

Rodless Pneumatic Cylinder works in temperatures to 500 -ºF.

OSP Series Thermocylinder can be used for door opening and transfer in extreme temperature applications. It uses heat transfer and thermodynamic principles to allow coolant to pass through entire length of cylinder. As coolant passes through, heat energy is absorbed and barrel behaves similar to water jacket. This keeps heat away from cylinder bore where plastic and rubber parts are used.

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.