New Fluid & Gas Flow Equipment Products

Isolation Valve measures less than 1 in. long.

Micro-miniature Model 218 inert 2-way solenoid-operated valve is 3/8 in. in total diameter. It features manifold interface design, requiring no locating pins. Valve has TeflonÃ-® and Peek body for chemical resistance, making it suitable for corrosive gases and fluids. It is rated at 30 psi and provides flow rates of 405 cc/min @ 30 psi with water. Coil configurations include 24 Vdc 1.2 W or...

Check Valves are suited for vacuum operations.

Vacuum check valves work with venturi vacuum pumps and switches to seal and maintain vacuum levels. With cracking pressure rated at less than 1 in. Hg., they allow air flow in one direction only. Valves can be manually operated or automatically controlled by vacuum switch. Able to be used in any orientation, valves come in 1/4 and 3/8 in. NPT sizes and are made of chrome plated brass with...

Safety Valve offers pull ring for testing.

Figure 15LC Safety Valve is ASME Section VIII UV certified and is suitable for bulk hauling railroad and truck tank cars. It provides tight shutoff, sharp popping and closing action, and repeatability. Proper alignment of seating surfaces is assured by integral inlet and body casting. Its threaded 2 in. aluminum body handles pressures from 5 to 15 psi and temperatures to 250Ã-

Control Valve converges and diverges liquid flow service.

Class DOT 3-way control valve has one-piece body construction with spring-loaded Teflon chevron stem packing that eliminates need for periodic adjustment. Cage-guided trim reduces stem load and adds to valve stability; there is no need to remove DOT from line to replace trim. Control valve is available with cast iron or bronze body in 1 through 3 in. sizes. It is offered with threaded or flanged...

The Ultimate Guide To Hydra Pneumatic and Servo Cylinders

This white paper provides a guide to hydra pneumatic and servo cylinders.

Magnetic Drive Pumps have no seals, don't leak.

Self-priming pumps are available in polypropylene/PVDF or high temperature PVDF materials, making them suitable for acids, alkalies, caustics, bleaches, sea water, solvents, and other harsh environments. There is no metal contact with liquid being pumped. Power is transmitted by magnetic field from magnet attached to motor through solid body of pump to magnet attached to impeller. Pumps have no...

Valve provides precision fluid transfer in syringe system.

Dual solenoid, 3-way valve features rectangular design capable of switching on demand to allow independent operation of each inlet port. Four possible on/off configurations between normally-open and normally-closed ports include both on, both off, on/off, and off/on. Valve can be assembled on top of multiple syringes, and mounted side-by-side while functioning in traditional aspirate and dispense...

Injection System provides uninterrupted well operation.

Model EKO Solar-Powered Injection System for oil and gas wells is fully self-contained and features sealless metering pump that can inject corrosion inhibitors at up to 72 gal per day against 3,700 psi. Pump has 2 PTFE diaphragms that isolate process fluid, providing double containment with zero-leakage, run-dry tolerance, and overload protection. It requires less than 160 W of DC power, which is...

Particle Strainer suits 55-gallon drums and 5-gallon pails.

EZ-Strainer(TM), when placed atop open-head drums, separates unwanted particles from product, as product is poured. Designed with ring made from heavy duty, high-density polyethylene, its center screen is available in fine, nylon, or multi-element mesh (medium or coarse). It is ideal for removing debris from paints, coatings, silicones, or inks. Strainer also allows recycling of cleaning...

Polymer Tubing suits high temperature applications.

Electron beam cross-linked tubing has permanent, three-dimensional molecular structure that provides creep, fatigue, and abrasion resistance. Cross-linking process does not leave any residue, odor, or aftertaste on tubes or assemblies. Tubing can be expanded and shrink-wrapped over objects. Available up to 8 in. dia., tubing suits water, medical, automotive, electrical, and packaging industries.

Proportional Valves with integrated bus interfaces.

Models 4WRAF, 4WREF and 4-, 5-WRZF proportional valves are available with Profibus DP and CAN-BUS with DS 408 CANopen protocol bus connections. They also have separate connector for power supply and bus connection. Bus allows command value, control, and status words to transferred, and it supports 4 quadrant ramp generator, overlap compensation, and zero-point correction functions.

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.