New Fluid & Gas Flow Equipment Products

Isolation Valve reduces possibility of leakage.

Series 462 Resilient-Seal 3-way inert isolation valve utilizes soft FFKM (KalrezÃ-®) disc within PTFE diaphragm to create tight seal. Highly inert materials such as PTFE, PEEK, and FFKM make it suitable for handling aggressive reagents or high purity media found in analytical instrumentation. Internal volumes and dead volumes are also minimized to avoid contamination and reagent waste. Valve...

Chemical Feed Systems are custom built for CPI applications.

Built with metering pumps, tanks, portable mixers, and control panels, feed systems are fully piped, wired and tested. Piping is available in all materials, threaded or welded. Systems are packaged with tanks on board and include space for semi-bulk containers or totes. Users also have option to use external bulk containers or totes. Feed systems can be configured for feed rates from 0.02 through...

Lift Axle Control increases air flow.

AKAD1001 lift axle air control kit is approved for use with INTRAAX-® and HT SERIES liftable suspensions. Kit comes with ball valve, pilot valve, solenoid valve, gauge, and regulator fitted in fiberglass reinforced enclosure. Pilot ports and potential water traps face down or are placed above exhaust ports to help prevent water from collecting. Air control was tested from -40 to 180-°F.

Manifold never exceeds transducer's pressure rating.

Designed for differential pressure measurements of liquids and gases, 3-valve manifold for Model 230 differential pressure transducer works with line pressures to 250 psi. It weighs less than 2.5 lbs and measures 7.05 in. wide x 6.25 in. high. Construction includes brass body, brass pipe fittings, copper tubing, and plastic valves.

Increasing Workplace Safety with Beryllium Medical Surveillance

To learn more about how you can develop a workplace safety plan that follows OSHA regulations and fits your company's specific needs, download now.

Centrifugal Pumps suit low-flow, low-head applications.

Magnatex-® MMP Series magnetically driven, sealless pumps provide leak-free pumping of flows to 20 gpm, heads to 90 ft, and pressures to 85 psig. Heavy-duty pumps utilize straddle bearing design, and are furnished with shaft, thrust ring sleeves, and bushings made of Beta-sintered Silicon Carbide material. Shaft is stationary and suction/discharge ports are male NPT. Models are offered in 316 SS...

Pressure Regulators have Teflon-® wetted parts.

Suitable for semiconductor and other applications requiring ultra-pure liquids, Series PRU regulators convert inlet pressure up to 120 psi to preset downstream range from 5 to 100 psi. Valve body materials are Teflon PTFE, KynarÃ-® PVDF, or natural polypropylene. Piping connections are flare, spigot, socket, or threaded. Convoluted, Teflon diaphragm senses and controls downstream pressure....

Monitoring System provides bi-directional communication.

PC-compatible Process Environment Monitoring System (PEMS(TM)), with complete line of sensors, monitors multiple locations in real-time. It provides graphic of critical points in process, overall status of area, programmed stations, on/off-line status, system performance, alarming stations, and stations requiring service. PEMS architecture provides capability to control process through 2-way...

Self-Priming Pump suits food and beverage industries.

Model Ws+ with flexible diameter impeller settings allows users to set flow and pressure levels up to 396 gpm and 200 ft, respectively. Suitable for hygienic applications, it is approved to 3A sanitary standards. Standard hydraulic pump comes with 1 mechanical seal made of silicon carbide/carbon. Double mechanical flushed seal and silicon carbide/silicon carbide seal faces are also available.

Directional Control Valve comes complete with electronics.

Model 4DP01 proportional valve has factory-set, top-mounted amplifier electronics, allowing repeatability from valve to valve, and minimizing setting procedure in field. Non-conductive electronics box is suitable for food processing applications, where frequent wash downs are required. Other applications include plastic injection molding machines, extrusion presses, die-casting machines, conveyor...

Grease Pumps target harsh applications.

RAM reciprocating grease pumps have double acting downtubes and provide 4.5 gpm grease delivery. Powered by RAM air-operated 3 in. dia spool valve motor, they provide constant grease flow on both upstroke and downstroke. Pumps produce 50:1 material-to-air pressure ratio. Air inlet is 1/4 in. female, and material outlet is 3/8 in. female. Units are available in portable, drum, and bulk dispensing...

High or Low Volume Custom Crates and Boxes Available from Reid Packaging

Reid provides mil-spec crates and corrugated boxes in custom dimensions from single to triple wall and will even package them on-site. Check out the video to learn more.