Material Handling & Storage

Long Parts Storage System holds items over 36 in. long.

Molded from high-impact plastic, ProHANGER is suited for holding long tubes (plastic or metal), rods, electrical conduit, lumber, trim, and pipes over 36 in. long. It can be used with louvered or rail hanging systems, or can be attached to any surface with screws. Featuring bright red color for visibility in dark or in low-light environments, system can be used alone or placed side-by-side to...

Read More »
Magnetic Holder helps keep tools organized.

Magnetic Holder helps keep tools organized.

Available in screw-mount and magnetic-mount styles, 12 in. Magnetic Knife and Tool Holder holds up to 30 lb/in. Unit stores frequently used knives, utensils, and tools for quick access. Magnetic mount style bar attracts to any ferrous metal surface with permanent magnets, will not slip from mounted position, and is movable to other work areas.

Read More »
Magnetic Trays keep small metal parts securely in place.

Magnetic Trays keep small metal parts securely in place.

Available in 14 x 6.25 x 1.5 in. rectangle, 9.5 x 5.6 x 1.5 in. rectangle, and 6 x 1.25 in. round sizes, Magnetic Parts Trays are suited for any project involving assembly and disassembly with small metal parts. Trays feature corrosion-resistant stainless steel construction and permanent magnets covered with rubber footing to prevent scratching and damage to surfaces. They can be used...

Read More »

Elkhart Central Garage Chooses Hoosier Crane

Elkhart, Indiana - (November 2, 2009) The Elkhart Central Garage chose Hoosier Crane Service Company, a local company, to build and install a 10-ton crane for the facility. Elkhart Central Garage mechanics will use the crane to perform motor teardowns and other maintenance projects on the large vehicles in the city's fleet including street cleaners, payloaders and dump trucks. Hoosier Crane...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Excel Conveyor Moves 'Cockpit Fit' Station 20 Metres

Excel Conveyor Moves 'Cockpit Fit' Station 20 Metres

Excel Monorail Systems (formerly Translift Systems), a division of Excel Automation, has recently completed an extension to a conveying and handling system, which has enabled the Cockpit fit station to be re-located 20 metres further along a car production line. Cockpits for the MINI range are delivered to Plant Oxford from the Magna Intier plant at Redditch in Worcester using specialised road...

Read More »
Recycling Containers come with single- or three-opening lids.

Recycling Containers come with single- or three-opening lids.

Allowing either 1 or 3 separate stream recycling to be collected within small area, RT metal containers are available in 15 or 18 in. for collection of paper, clear plastics, glass, and other recyclable materials. Each recycling stream is collected in separate heavy-duty plastic liner. One-opening 15RT includes single 24 gal liner, while 3-stream version comes with three 8 gal liners. One-opening...

Read More »
Conveyor System features walk-through sliding gate mechanism.

Conveyor System features walk-through sliding gate mechanism.

Providing users with quick access around factory floor, Slide Gate(TM) modular power belt conveyor system is powered by 25 W variable speed drive and has gate opening ranges up to 32 in. Sensors automatically stop and restart conveyor when user is through. Overall unit lengths for conveyor with gate start at 84 in. long by 28 in. high and are available in sides from 9-24 in. wide. Supplied fully...

Read More »
Heavy-Duty Magnetic Retriever comes in compact package.

Heavy-Duty Magnetic Retriever comes in compact package.

Measuring 3 in. dia x 5 -¾ in. high, HDR3045 captures metal objects from any wet or dry area that requires lifting capacities up to 300 lb. Rare earth permanent magnet is encased in stainless steel housing, and lifting lug accelerates attachment to chains, rope, slings, cable, etc. Weighing 5 lb, product is designed for applications such as retrieving broken drill bits from oil and water wells.

Read More »
Cycle Enhancement Package for Production Tables

Cycle Enhancement Package for Production Tables

This package increases the useful life of the lift. Advance Lifts, Inc. of St Charles, Illinois has released a new Cycle Enhancement package available on their Production Series lift tables. This cycle enhancement package is designed to extend the useful life of the lift in higher cycle applications with out incurring the higher cost adder of the high cycle (1,000,000 cycle warranty) unit. The...

Read More »

Ram Balers specialize in high-density bale production.

Designed for long life and able to handle various materials, HRB Centurion 300 and HRB 1035 respectively deliver 300 and 357 tons of ram force to produce heavier, denser bales. Both machines have 8.5 sec dry cycle time and employ twin 100 hp power unit. Along with heavy-duty main frame uni-bodies, balers feature Harris control system and program that includes 10 in. touchscreen, Harris Bale Watch...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics