Material Handling & Storage

Boom Lifts offer 45° steering angle for tight turning radius.

Featuring direction sensing drive and steer control system, SJ 61T and SJ 66T telescopic boom lifts utilize axle based 4WD system that incorporates Detroit Locker type rear differential and limited slip front differential. Lifts include standard color coded and numbered wiring system along with relay based controls.

Read More »
Tool Dispenser integrates into users' supply chains.

Tool Dispenser integrates into users' supply chains.

Promoting systems intergration, MATRIX(TM) Series 4 automated tool dispenser offers flexibility of use, connectivity options, and data management. Scalable solution is installed to house inventory and feed back information regarding consumables use and replenishment requirements. Centrally managed, PC-driven cabinet is configured as sloping-fronted chest of 6-9 drawers 50, 75, or 100 mm deep. Any...

Read More »

Dodge Continues Commercial Vehicle Market Offensive with Strategic Upgrades, Enhancements

ATLANTA, Feb. 26 - 2008 Dodge Ram 4500 and 5500 Chassis Cabs' fuel economy 23 percent better than Chevy Kodiak and GMC Topkick; 14 percent better than Ford F-550 Chassis Cab o 2008 Dodge Sprinter offers 25 percent better fuel economy than Ford E-series vans o 2008 Dodge Ram 4500 and 5500 Chassis Cabs certified for up to 1,172 lbs. payload advantage over Ford F-450 and F-550 chassis cabs o 2009...

Read More »
Flexible FEP Corrugated Tubing Turns Sharp Corners Without Reducing Flow

Flexible FEP Corrugated Tubing Turns Sharp Corners Without Reducing Flow

Flexible FEP Corrugated Tubing Turns Sharp Corners Without Reducing Flow Ft. Worth, TX - February 25, 2008 - Tex-Flex(TM) FEP corrugated tubing from Parker-TexLoc is capable of turning sharp corners with very small bend diameters without reducing the inside diameter of the tube. In fact, the bend diameter is almost 4x smaller than a typical smoothbore tube of the same size. Increased bend...

Read More »
See the Newest Bar Feeder Technology from IEMCA at Eastec Booth #1033

See the Newest Bar Feeder Technology from IEMCA at Eastec Booth #1033

Charlotte, NC - IEMCA will showcase its bar feeder technology at Eastec 2008. IEMCA is a leading manufacturer of automatic bar feeders for single-spindle and multi-spindle lathes, and will feature the new Elite 112 inside IEMCA booth #1033. The Elite 112 bar feeder is able to feed bars of 0.8 mm to 12.7 mm even on lathes with very high rotation and headstock acceleration speeds without limiting...

Read More »
Wash-Boxes are constructed of FRP, not stainless steel.

Wash-Boxes are constructed of FRP, not stainless steel.

Designed to handle payloads up to 150 lb, stackable fiber-reinforced polymer (FRP) composite metal parts wash-boxes are engineered to withstand small-parts washing system chemicals. Product is dimensionally stable, cleanable in hot water or steam, withstand temperatures to 350°F, and can be customized to meet unique corrosion specifications. Offered in various sizes, boxes feature -¼ or 3/8 in....

Read More »

Bench-Top Dispenser meters 2-component reactive resins.

MIXPAC DXBG Dispenser allows A & B components of flowable adhesives to be gravity-fed from separate, refillable, 2 gal containers through integral DX dispenser, and components are then forced by metering rods directly into disposable static mixer. With ability to use bulk packaged materials, bench-top dispenser comes with foot pedal actuator, which allows for hands-free operation. Stand is fully...

Read More »
Nanopositioning Stages offer travels from 50-1,800 µm.

Nanopositioning Stages offer travels from 50-1,800 µm.

Suited for use in surface metrology and static positioning, PIHera® flexure-guided piezo nanopositioning stages are available in X, XY, Z, and XYZ versions that provide linear motion with up to 99.98% accuracy. These precision, closed-loop stages are equipped with non-contact, capacitive sensors and offer resolutions from sub-nanometer to 3 nm. Acceleration forces are provided by multilayer...

Read More »
K-Tron and Premier Pneumatics (K-Tron Process Group) to Exhibit New and Expanded Process Automation Product Line at PTXi 2008/Powder and Bulk Solids Show

K-Tron and Premier Pneumatics (K-Tron Process Group) to Exhibit New and Expanded Process Automation Product Line at PTXi 2008/Powder and Bulk Solids Show

Powder and Bulk Solids Show, May 6-8, 2008, Donald E. Stevens Convention Center, Rosemont, Illinois, Booth 1328 PITMAN, NJ (February 25, 2008) - The K-Tron Process Group will exhibit several new additions to the K-Tron Feeder and Premier Pneumatics product line at PTXi 2008 (Powder and Bulk Solids Show), May 6-8, 2008, Donald E. Stevens Convention Center, Rosemont, Illinois, Booth 1328. The...

Read More »
Amcor's PowerFlex(TM) Bottle Selected to Launch Sportsdrink+, First Isotonic Performance Beverage Formulated for Motor and Power Sport Athletes

Amcor's PowerFlex(TM) Bottle Selected to Launch Sportsdrink+, First Isotonic Performance Beverage Formulated for Motor and Power Sport Athletes

Amcor's PowerFlex(TM) bottle selected to launch Sportsdrink+, first isotonic performance beverage formulated for motor and power sport athletes Manchester, MI - (February 26, 2008) -Amcor PET Packaging helps Hazardous Fluids Pty Ltd, Melbourne, Australia, launch the first isotonic supplement drink specifically designed for motor and power sport athletes. The company has selected Amcor's...

Read More »

All Topics