New Fluid & Gas Flow Equipment Products

Dust Management Products collect dust and recycle air.

Model AP200 1/8 hp, 1-phase air purifier offers 750 cfm capacity. One micron inner filter coupled with 5 micron outer filter recycles air in 20 x 20 x 8 ft room 16 times/hour. With remote control 1/5 hp motor, Model 50-875 3-speed air purifier offers 1,300 cfm capacity on high, 850 cfm on med, and 650 cfm on low. One micron pleated inner filter and electrostatic outer filter are 91% efficient...

Multi-Bag Filters handle flow rates from 230 to 4500 gpm.

MAXILINEÃ-® multi-bag filter vessels are offered in models with 3 to 24 bags, and provide filtration down to 1 micron particle size. Buna NÃ-® seals are standard. Carbon steel or stainless steel construction can be specified and both come with ASME Section VIII Division 1 U Code Stamp. Cover opening designs include davit type, spring assisted, and quick opening. Bags are offered in 18...

Portable Air Compressor suits smaller spray applications.

Model 66-501, 8-gallon air compressor offers 120 V motor with peak 2 hp rating, oil-free design, and replaceable brushes. Unit delivers 3.7 cfm at 40 psi and 2.6 cfm at 90 psi. With 125 psi maximum pressure, model 66-501 supports heavy usage of brad nailers, staplers and finish nailers, and medium to heavy roofing and framing nailers. Horizontal design incorporates built-in automatic thermal...

Stainless Steel Adapters offer alternative to exotic alloys.

ChemfluorÃ-®-lined 316L stainless steel adapters maintain high purity and corrosion-resistant fluid transfer between flexible hose and process equipment. They are available in 150# Flange by Sanitary Clamp, I-Line, and Cam Lock fitting styles. Adapters are suitable for chemical, pharmaceutical, food manufacturing, industrial, and biotech applications.

Bearing Solutions for Machine Tool Applications

An in-depth overview of the types of bearings used in machine tool applications. Check out this eBook to learn more.

Double Diaphragm Pump interchanges with competitive pumps.

Air driven, double diaphragm 3 in. pump provides output of 255 gpm. Aluminum pump has non-stall, lube free, and freeze resistant air system. Optional surface treatment inside and outside inhibits corrosive attack from salts. Pump has minimum of components and is easily assembled in less than 30 min. Elastomers are available to match any application.

Relay suits opto-electronic protective devices.

MSI Relay expands function of safety light curtains by adding restart interlock, relay monitoring, single or double break, and muting. It is capable of monitoring category 4 safety switches and/or e-stop buttons. Modular unit comes in either 35 or 53 mm housing and is available with 2 different plug-in output sub-assemblies, one for potential-free switching in AC control circuits and one for...

Electro-Mechanical Relays feature 40 A switching current.

HD-1 Relays are rated for 40 A @ 240 Vac/30 Vdc, 1 hp @ 120 Vac, and 2 hp @ 240 Vac. They offer 9600 VA (ac)/1200 W (dc) max switching power in normally-open version. Suited for equipment with motors that constantly cycle on/off, relays are available in PCB, TMP, and panel mount styles with SPST (1-Form-A), SPST-NC (1-Form-B), and SPDT (1-Form-C) contact configurations. They provide 1 x 107...

Valves and Strainers fit industrial and commercial applications.

Butterfly valves are available in cast iron with stainless steel shafts, in 2-48 in. sizes. Phenolic backed seat prevents seat collapse and provides primary shaft seal. Check Valves are available in cast iron, bronze, carbon steel, and stainless steel in 2-30 in. sizes. Resilient seat maintains soft seal in case of seat failure. Fabricated strainers are available with cast iron, bronze, steel, or...

Slurry Pump employs solid, high chrome casing.

Model 5100 heavy-duty, submersible pump develops up to 130 ft of head and delivers up to 1,400 GPM through its 4 in. discharge. Suitable for use where solid granules are present and can erode pump parts, unit's hydraulic design eliminates need for over-trimming impellers. Impellers feature backvanes to reduce pressure on outer mechanical seals. Motor offers sensors to warn against high...

Rotary Drum Filter provides liquid-solid separation.

Disposable rotary drum filter is only 6 in. dia by 7 in. long. It consists of polycarbonate outer shell and housing made from porous UHMW Polyethylene (15-45 micron sieve). Drum is 3 in. dia by 4.5 in. long with surface area of 42.4 in-², and effective filtration area of 14 in-². Filter offers slurry-processing rates of 1 to 3 Lpm and batch processing capacity of 900 L if continuously operated...

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.