Solenoid Valves are water-resistant for submerged operations.
Series 15 or 50 valves feature liquid epoxy potted coil assembly and rugged housing covered with baked-on epoxy/polyester finish rated at 1000+ hours in 5% salt spray test. All internal parts are constructed of stainless steel and brass. Corrosion resistant materials are used for exposed parts. Standard version operates on 12 Vdc, single lead power connection. Dual power lead versions can be used...
Read More »
C-Band TVRO Interference Filter suits digital applications.
Model 7893D bandpass filter offers insertion loss of less than 0.4 dB (center) for 3.7 to 4.2 GHz receive band. Rejection of 25 dB minimum at 3.65 and 4.25 GHz provides suppression of marine and altimeter interference frequencies. Unit also provides 75+ dB rejection at 3.5 and 4.4 GHz. Group delay of less than 8 nS suits digital applications, and LNA and LNB overload is prevented. Constructed...
Read More »
Hose System ties die springs together.
Micro EZ(TM) is suitable for hosing together gas springs in smaller and progressive dies where space is limited and where standard hose and fittings cannot be used. It provides pressure adjustability, pressure monitoring, and uniform pressure. Compared to standard hose systems, it has reduced minimum bend radius, more compact hose adapters, and control panel that allows hoses to be connected...
Read More »PXI Switching Card suits general-purpose applications.
PXI general purpose, low-level switching card model GX6325 has 75 Form-C relays (SPDT) capable of switching 2A @ 220 Vdc/250 Vac. Connections to 6U PXI card are made via 3 DB-78 high-density connectors. It is suitable for all test applications requiring low-level switching.
Read More »Finding the Right Bore Configuration for your Application
There are multiple things to consider when choosing a bore configuration for your application. Check out this e-book to learn more!
Read More »Filter includes 3-way valves for backwashing.
Ronningen-Petter AFC Series high-pressure, tubular in-line pressure filter offers nominal filtration from 1 to 1650 micron on water-like liquids up to 500 psi. Simple design and quick element access reduces time and effort required to maintain, change elements, and reconnect unit's valves.
Read More »
Pressure Regulator controls high purity, acid-forming gases.
Model 237 Series pressure regulator is suited for compressed gases such as hydrogen chloride and boron trifluoride. Its single-stage, aluminum silicon bronze diaphragm is mechanically linked to poppet to provide positive shutoff control. Stainless steel diaphragm is lined with HastelloyÃ-® C-22 to protect gas purity. Delivery pressure ranges are 3 to 75 and 10 to 150 psig. Maximum inlet...
Read More »
Metering Pump resists most chemicals.
Pocket Bellows plastic pump is self-priming, repeatable from stroke to stroke to Ã-
Read More »Dislodging Device duplicates blow of a sledgehammer.
Hopper Hammer automatically generates impact that dislodges dry material from sides of material handling equipment and unplugs hoppers, bins, and bunkers. It has greater acceleration than standard vibrators to overcome material's natural adhesive forces and cause fluid release of material pluggage or residue. Unit runs on 110 Vac and can operate in any position, making it suitable for chutes and...
Read More »
Sootblower Nozzle handles tough boiler cleaning applications.
Gemini(TM) sootblower nozzle provides equal cleaning distribution that reduces potential for sootblower-induced boiler tube erosion by approximately 60%. It is equipped with cast-body staggered nozzle jets for most effective cleaning arrangement. Gemini nozzle can improve cleaning performance of existing sootblowers, while reducing energy consumption of boiler cleaning system.
Read More »
Tint Mix System matches any color with simplified tint set.
DynaMatch Tint Mix System allows finishers to meet application, VOC, and color requirements for small or large production orders without stocking expansive inventories. Using one set of 16 high-pigment loading tint pastes, system allows for accurate color matching via various bases, primers, catalysts, reducers, and additives. VOC base ratings range from 2.0 lb/gal to 5.5 lb/gal. Common bases can...
Read More »
Locon Sensors Withstand Extreme Temperatures
Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.
Read More »
