New Material Handling & Storage Products

EMI Cage offers one-piece construction.

Small Form-factor Pluggable (SFP) EMI Cage, for use with both copper and optical SFP transceivers in Fibre Channel, Gigabit Ethernet, and Infiniband applications, is compatible with SFP Transceiver Multi-Source Agreement (MSA). One-piece construction prevents separation of pieces and minimizes seams from which EMI radiation can leak. Press-fit pins allow cage to be securely mounted to printed...

Support Stands accommodate multiple conveyors.

Multiple Tier Support Stands accommodate up to 3 flat or cleated conveyors. It works with company's 2200, 3200, 4100, 6100, MPB, and LPZ Series conveyors. They can be erected to maximum height of 72 in. with widths between 12 and 40 in. Stands have aluminum alloy construction. Center conveyors can be accessed and removed without removal of upper conveyors.

Channel Framing spans bar joists.

ERISTRUT half slot channel (12 gage 1 5/8 or 13/16 in.) comes in 6 ft 8 in. precut lengths with green powder coat, pre-galvanized, and yellow dichromate finishes. ERISTRUT channel framing is available in every strut style with finishes that include those listed above as well as hot dip galvanized, stainless steel, aluminum, and plain. CADDY(R) prefabricated strut/beam clamp model numbers 200RS...

Collapsible Container offers high return ratio.

SmartCrate(TM) hand-held returnable container features 2-step assembly and high cube utilization. It is 48 x 40 in. GMA pallet compatible and cross-stackable. Container is suitable for moving perishable groceries and other products in retail as well as plant-to-plant transfers of work-in-process materials.

Pressure Vessels & Their Components

This white paper provides an in-depth look into custom fabricated pressure vessels and their components.

Rack holds up to 1,600 lbs per shelf.

Rivet-Grip(TM) freestanding heavy-duty rack is stocked 7 ft high, with depths from 12 to 48 in. and widths from 36 to 96 in. For long rows, it uses common uprights to reduce cost and enhance rigidity. Capacities range from 350 to 1,600 lb per shelf, which are available with particleboard or wire inserts.

Storage Cabinet shows its contents.

Dyna-CabÃ-® Hi-Vis has see-through door with PlexiglassÃ-® door panes that will not shatter or break, and show parts and supplies contained within. It has 2 point locking handle, all-welded construction, and 16 ga. doors that swing open on full-length piano hinges. Cabinet measures 38 x 20 x 72 in. and comes in blue or gray colors.

Utility Box accommodates receptacles.

DRUB DIN Rail Utility Box can be ordered with 15 or 20 A duplex receptacle, 15 A isolated ground receptacle, 15 A GFCI receptacle, or 15 A TVSS receptacle. It has gray enclosure, faceplate, and receptacle. Options include 5 A circuit breaker that eliminates need for separate fusing or circuit breakers in control cabinet. Pre-wired kits are available for custom receptacle requirements. Box comes...

Racks store empty pallets.

Single-Leg Over-Dock Storage Racks feature upright frame with offset leg, and one single back column up to height that will clear door. Ceiling Supported design must be worked into building plans to ensure structural stability. It has no lower legs to interfere with traffic. Racks include structural channel load beams with bolted connections. Two bolt-in pallet supports are installed under each...

Container exceeds distribution container specifications.

FlapNest(TM) 2115 Series attached-lid container offers 5-to-1 nesting ratio. Its features include: all-plastic hinges; security features suitable for securing with strapping, tie wraps, and snap-in clips; and leak-resistant lid. Deeper contoured handle allows greater access when nested. FlapNest 2115 is available in heights of 9 and 12 in. with optional features such as solid and open bottoms.

Purge Cabinet offers roll-out shelves.

Nitrogen Purge Cabinet features sealed sides, back, and doors that can be made of plexiglass when visual control is required. Roll-out shelves provide easy access to all items being stored. Shelf sizes range up to 10 ft wide and 5 ft deep. Units can also be made completely out of stainless steel.

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.