Fluid & Gas Flow Equipment

ANT95-R and ANT130-R Nanopositioning Rotary Stages
Positioners

ANT95-R and ANT130-R Nanopositioning Rotary Stages

ANT95-R and ANT130-R Nanopositioning Rotary Stages Offer Laboratory Performance on a 24/7 Production Floor Sub-arc-second performance with 20°, 180°, or 360° continuous travel 0.01 arc-second resolution 0.005 arc-second in-position stability Maximum speed is 200 rpm and maximum acceleration is 400 rad/s2 Outstanding error-motion specifications Multi-axis configurations High...

Read More »
Cartridge Valves support vehicle applications up to 5,000 psi.
Valves

Cartridge Valves support vehicle applications up to 5,000 psi.

Incorporating modified standard cavity with bottom shoulder to support valve cage, H-Series HyPerformance(TM) Valves offer continuous operating pressures to 350 bar and intermittent pressures to 420 bar. Single-piece PPDI urethane seals eliminate need for backup rings, while IP69K-rated solenoid coils support continuous operation at ±15% of rated voltage. Valves conform to NFPA's T2.6.1...

Read More »
Precision Metering Pump integrates VFD/motor controls.
Pumps

Precision Metering Pump integrates VFD/motor controls.

Available in bare-shaft and close-coupled configurations, Moyno® Metering Pump accommodates diverse metering application demands while promoting performance metering of low-flow liquids in range of processing applications. Integral VFD/motor controls promote metering accuracy and repeatability, while progressing cavity design results in smooth flow, free from pulsations and variations in...

Read More »
Pumps

Water Pumps come standard with oil sensor.

Powered by 4.5 and 6 hp Subaru EX-series overhead cam pump engines, respectively, 2 in. PTX 220 Series and 3 in. PTX 320 Series feature ribbed crank case, which transfers heat from inside engine to outside for optimized cooling. L-shaped conrod oil pickup lubricates timing chain, which in turn, lubricates valves and upper part of engine. Pumps are suitable for agriculture, water tankers, and...

Read More »
Purifiers

Personal Purification System supports 5 different solvents.

With interchangeable pump heads, PLC 2020 supports flow rates of 25 mL/min at 4,600 psi, 50 mL/min at 2,100 psi, and 100 mL/min at 1,200 psi. Benchtop system has electronically actuated manual injections of up to 10 mL volumes and variable dual wavelength UV/VIS detection from 190-700 nm. Suitable for high pressure reverse phase and normal phase applications, system uses integrated touchscreen...

Read More »
Welding Supplies

Non-Rotating MIG Wire Reel offers no-tangle payoff.

Available for Lincoln premium copper-coated SuperArc® MIG wire line, Precise-Trak(TM) reel incorporates wire winding technology that provides consistent wire placement and optimal joint tracking for no-tangle payoff. Precise wire placement also decreases weld defects caused by wire wander, while virtually unlimited stacking ability increases floor space. Areas of use include automatic and...

Read More »
Reciprocating Compressors operate in up to 45°C ambient heat.
Air / Gas Compressors

Reciprocating Compressors operate in up to 45°C ambient heat.

Supplied with soundproof enclosure, Airbox and Airbox Center provide air deliveries from 0.25-0.9 mÂ-³/min with motor powers from 2.4-7.5 kW. Airbox models are available with 5 motor powers and choice of 2 package sizes. Each unit features dry-running, directly coupled KCT reciprocating compressor powered by eff 1-rated drive motor. Airbox Centers, as turnkey compressed air supply solutions,...

Read More »
Dental Air Compressors produce sound levels from 59-67 dB(A).
Air / Gas Compressors

Dental Air Compressors produce sound levels from 59-67 dB(A).

Intended for dental practices, clinics, and laboratories, Airbox Dental models deliver 250-900 Lpm, 5 motor power ratings from 2.4-7.5 kW, and 2 package sizes. Dry-running, directly coupled KCT reciprocating compressor is powered by eff 1-rated drive motor, and airflow design allows 100% duty cycles and dependable operation in ambient temperatures up to 45°C. As turnkey, all-in-one...

Read More »
Pumps

High-Pressure Piston Pumps work with heavy materials.

Suited for transfer/supply of medium- to high-viscosity materials, ARO 65:1 ratio pump offering includes single- and 2-post extrusion pump rams and complete ram/pump packages for 5 gal containers. Chop-check pump packages handle fluids in excess of 1,000,000 cps and pressures to 7,475 psi. While chrome-plated plunger rod and cylinder are suited to pumping abrasive fluids, stroke lengths and cycle...

Read More »
Aircraft

Boeing, Avolon Announce Order for 12 Next-Generation 737s

Boeing, Avolon Announce Order for 12 Next-Generation 737s FARNBOROUGH, United Kingdom - Boeing (NYSE:BA) and Dublin, Ireland-based leasing company Avolon today announced an order for 12 Boeing Next-Generation 737-800 jetliners. Valued at approximately $921 million at average list prices, the Avolon order was posted to Boeing's Orders and Deliveries website in December 2009 and attributed to an...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers