Fluid & Gas Flow Equipment

Sundyne's LMV 801 Line of Direct Drive Pumps adds a series of upgrades.
Fluid & Gas Flow Equipment

Sundyne's LMV 801 Line of Direct Drive Pumps adds a series of upgrades.

Sundyne's  LMV 801 line of driect drive centrifugal pumps now offer a variety of optional upgrades. These upgrades include the API 682 cartridge seal to prevent errors and installation and common seal failures, and the API 685 sealless magnetic drive to eliminate emissions and improve personnel safety. These upgrades offer flexible mechanical seal and sealless configurations and are able to...

Read More »
Latitude Series C Filtered Hoods are designed with HEPA filtration.
Electrical Equipment & Systems

Latitude Series C Filtered Hoods are designed with HEPA filtration.

Latitude™ Series C Filtered Hoods is suitable for use in biotechnology and pharmaceutical industry for handling harmful chemicals. Unit is equipped with Saf-T-Zone™ filtration system, which separates pre-filter and main HEPA filter during filter change out. EverSafe™ microprocessor controller monitors the filtration system and alerts the end user, with audible and visual alarms in the event...

Read More »
Danfoss Hhighlights Innovative Solutions for Chiller and Rooftop Optimization and Differentiation at AHR Expo 2018
Fluid & Gas Flow Equipment

Danfoss Hhighlights Innovative Solutions for Chiller and Rooftop Optimization and Differentiation at AHR Expo 2018

At the 2018 AHR Expo, Danfoss showcased its ongoing - and intensifying - investment in the development of innovative high-efficiency air-conditioning solutions. For both chillers and rooftop units, Danfoss remains focused on providing technologies that address evolving energy-efficiency standards, a demand for additional energy savings, the conversion to lower GWP refrigerants, and the...

Read More »
Valves Buying Guide
Sponsored

Valves Buying Guide

Valves are mechanical or electro-mechanical devices that are used to control the movement of liquids, gases, powders, or other types of materials. Choosing the best valve for the task at hand is essential, but the process of choosing one is complicated and sometimes convoluted. This buying guide will help you sift through the many types of valves and the different considerations you need to take into account when purchasing one. Let ThomasNet assist you in assessing the important attributes of a valve like flow coefficient, valve size, pressure rating, and port connections and help you buy the ideal valve to for your material movement control needs.

Read More »
Rockler Expands Line of Dust Right Innovations - Seven New Accessories Improve Organization, Function of Dust Systems
Fluid & Gas Flow Equipment

Rockler Expands Line of Dust Right Innovations - Seven New Accessories Improve Organization, Function of Dust Systems

Rockler Woodworking and Hardware has introduced seven new dust collection solutions to its line of Dust Right products. This wave of solutions includes several "missing links" to enhance the performance of existing dust collection setups, providing tighter fitting connections as well as out-of-the-way pipe installation and hose management accessories. MEDINA, MINN. - FEBRUARY 06, 2018 - Rockler...

Read More »
Sika Releases Industry’s First Cradle-to-Grave Environmental Product Declarations (EPDs) for Single-Ply Roofing
Fluid & Gas Flow Equipment

Sika Releases Industry’s First Cradle-to-Grave Environmental Product Declarations (EPDs) for Single-Ply Roofing

CANTON, MASS. - FEBRUARY 06, 2018 - Sika, the worldwide market leader in thermoplastic roofing and waterproofing membranes, has published new product-specific Environmental Product Declarations (EPD) for its Sarnafil® S 327 and G 410 single-ply PVC roofing membranes. By publishing these new EPDs, Sika becomes the first manufacturer in the industry to distribute Cradle-to-Grave declarations for...

Read More »
2680CWW40 WOB-L® Vacuum Pump meets RoHS and REACH standards.
Fluid & Gas Flow Equipment

2680CWW40 WOB-L® Vacuum Pump meets RoHS and REACH standards.

2680CWW40 WOB-L® Vacuum Pump is equipped with 4.8 in. frame P.S.C. motor operated at 100-127V and 200-240V with 50/60Hz. Product is for suitable medical, laboratory, and industrial applications and features tapered piston seals. Unit comes with Epoxy coated wetted parts, thermally protected motors, internal 9 blade cooling air flow fans and offers open flow up to 4.5 cfm. Pump measures 10.57 L x...

Read More »
De Dietrich Process Systems is Successful with Hygienic Drying in a Vacuum Spherical Dryer for API Production
Fluid & Gas Flow Equipment

De Dietrich Process Systems is Successful with Hygienic Drying in a Vacuum Spherical Dryer for API Production

Fast drying. Emptied completely. Cleaned in a flash. Following the manufacture by wet chemical processes, Active Pharmaceutical Ingredients are precipitated or crystallized out from the solvent. The subsequent steps are usually isolation and drying. Hygienic drying in a vacuum requires a lot of attributes. The innovative spherical dryer design provides the highest performance according process...

Read More »
ILSCO Enriches Our Offering of Taskmaster Tools
Fluid & Gas Flow Equipment

ILSCO Enriches Our Offering of Taskmaster Tools

TaskMaster® Tools from ILSCO include hand operated and battery powered in-line and pistol-grip hydraulic crimping and cutting tools, remote heads, and pumps. Features of the tools include 350°/360° head rotation for maneuvering in confined spaces and operating on Milwaukee batteries to ensure optimal battery life. Cutting and crimping capacities are extensive and afford installers the ability...

Read More »
Calibrated Noise Sources offer a VSWR as low as 1.25:1.
Cleaning Products & Equipment

Calibrated Noise Sources offer a VSWR as low as 1.25:1.

Calibrated Noise Sources are available in models that cover frequency bands from 10 KHz to 18 GHz. Units are suitable for wireless testing, signal simulation, evaluating analog and DOCSYS CATV systems. Product features a temperature coefficient of less than 0.01 dB/°C and noise output variation is less than 0.1 dB/%V. Noise Sources meet MIL-STD-202F standards and are enclosed in metal packages...

Read More »
Fresh Air Intake
Sponsored

Fresh Air Intake

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics