Watergen's GENNY Wins 2020 CTA Mark of Excellence Award for Its Innovative Water-From-Air Solution
CTA recognizes GENNY as a Smart Home Division Mark of Excellence Award recipient during CES 2020 LAS VEGAS, Jan. 8, 2020 /PRNewswire/ -- Watergen's GENNY, a new water-from-air appliance, has been named winner of the Energy Efficiency Product of the Year in the 2020 Smart Home Mark of Excellence Awards at CES in Las Vegas. Presented annually during CES by the Consumer Technology Association...
Read More »
New Butterfly Valves Available in Lug or Wafer Style
Offered in stainless steel disc or nickel plated bronze. Available in EPDM, BUNA and Viton seat options. Size ranges up to 24" or large.
Read More »
New OpenRTK330L Triple-Band RTK/GNSS Receiver Offers Ethernet Interface
Equipped with built-in triple redundant inertial sensor arrays to provide cm-level accuracy, enhanced reliability, and superior performance during GNSS outages. Integrates 2 Degree/Hour IMU to offer ten to thirty seconds of high accuracy localization during full GNSS denial. Operating temperature ranging from -40C to +85C and has RF and baseband support for the L1, L2, and L5 GPS bands.
Read More »
New Capto Toolholder and Insert from Walter are Ideal for Lathes and Turning/Milling Centers
Toolholders feature enhanced rigidity and modularity, while tapered polygonal shape handles both torsional and bending forces. Insert width ranges up to 0.222 in. (5.65 mm.) including dimensions of 0.125 in. (3.18. 0.157 in (4 mm.) and 0.196 (5 mm.) and has 0.24 in. (6 mm.) maximum cutting depth. Offers four-edge indexable inserts that can be used after one or more cutting edge breaks for maximum...
Read More »
Rack System Design & Buyer's Guide
There is plenty to consider before setting up or replacing storage rack systems in your warehouse. This whitepaper contains a guide and general checklist of the most important considerations.
Read More »
New FloroPoxy MVT-99 Primer for Protection Against High Levels of MVT
Applied at three different thicknesses to help mitigate a range of MVT emission rates. Withstands high moisture vapor emission rates up to 99% in-situ relative humidity per ASTM F2170 or up to 24 pounds per 1,000 sq.ft. within 24 hours, per ASTM F1869. Ideal for industrial, commercial and institutional facilities.
Read More »
New In-Duct UV LED Air Purification System is Mercury Free and Zero Ozone Compliant
Utilizes hybrid hydrophilic zinc enhanced washable ceramic catalyst and is powered by proprietary low energy, ultra-long-life, LED array. Treats every cubic inch of air-conditioned space, thereby reducing airborne and surface microbials, bacteria, viruses, mold, smoke and VOCs. Meets CARB performance standards and features REME-LED™ UV, PHI-CELL® and REME® technologies.
Read More »
Enhanced WirelessAir On-Board Air Compressor System Comes with Hand-Held Controller
Powered by heavy-duty, 120 PSI, 1.03 CFM, 9% duty cycle, 12V compressor that connects to the pre-assembled wiring harness. Offers dual-path system that allows adjusting their air springs independently of each other. Features EZ Mount™ system and LCD display that is weather-resistant and corrosion-proof manifold.
Read More »
New BDF Series Feeders Designed to Produce Positive Flow
Eliminates any type of convergence that could impede product flow and feed, ensuring smooth, gentle and unrestricted movement of stubborn to handle materials. Available options include sanitary construction to satisfy USDA and FDA codes. Designed to leave minimal amount of residual material when allowed to run empty.
Read More »
Burckhardt Compression Sells its First High-Speed Compressor for Underground Gas Storage Application in Europe
Burckhardt Compression will deliver a high-speed compressor to Ganzair in Hungary for injecting natural gas from a pipeline to an underground gas storage facility. This ISO 13631 compliant compressor will be the first high-speed compressor made by Burckhardt Compression for this sort of application in Europe. In December 2019 Burckhardt Compression sold its first high-speed compressor system in...
Read More »
New V-Groove Additions Coordinate with Carson V-Groove Door Style
V-Groove is a shaker-style door with a beveled inside edge profile. Includes V-Groove Ends, Backs and Panels. Features a shiplap inspired V-Groove center panel.
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
