Fluid & Gas Flow Equipment

Battery Booster includes automatic recharging function.

Battery Booster includes automatic recharging function.

Providing 1,700 peak amps and 425 cranking amps, Jump-N-Carry JNC660 can be continuously plugged in for recharging, without damage or overcharging, enabling busy shops and technicians to keep unit in always-ready state for their next jump starting need. Amber LED indicates that unit is currently charging and green LED shows when unit has reached full charge. System is suited for automotive,...

Read More »
Battery Booster includes automatic recharging function.

Battery Booster includes automatic recharging function.

Providing 1,700 peak amps and 425 cranking amps, Jump-N-Carry JNC660 can be continuously plugged in for recharging, without damage or overcharging, enabling busy shops and technicians to keep unit in always-ready state for their next jump starting need. Amber LED indicates that unit is currently charging and green LED shows when unit has reached full charge. System is suited for automotive,...

Read More »
Stencil Coating Wipe renders stencil surface fluxophobic.

Stencil Coating Wipe renders stencil surface fluxophobic.

Forming chemical bond with stencil surface, DEK Nano-ProTek minimizes ability of flux to stick to aperture and bottom side of stencil, enabling stainless steel or nickel stencils to be easily cleaned for optimal results. Wipe optimizes both capacity of understencil cleaner and gasketing of stencil to PCB. It can be applied to new and existing stencils at room temperature and may be re-applied as...

Read More »
Stencil Coating Wipe renders stencil surface fluxophobic.

Stencil Coating Wipe renders stencil surface fluxophobic.

Forming chemical bond with stencil surface, DEK Nano-ProTek minimizes ability of flux to stick to aperture and bottom side of stencil, enabling stainless steel or nickel stencils to be easily cleaned for optimal results. Wipe optimizes both capacity of understencil cleaner and gasketing of stencil to PCB. It can be applied to new and existing stencils at room temperature and may be re-applied as...

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »
Octal Ultrasound Receiver ICs consume as little as 25 mW/channel.

Octal Ultrasound Receiver ICs consume as little as 25 mW/channel.

Offering full time-gain-control path, ADC, and I/Q demodulator within 10 x 10 mm BGA package, 8-channel AD9278 and AD9279 are pin- and package-compatible with each other and provide output-referred large-signal SNR up to 67 dB. Model AD9278 suits portable ultrasound systems and AD9279 serves high-end and mid-range systems; both ICs offer 45 dB variable gain range, fully differential signal path,...

Read More »
Octal Ultrasound Receiver ICs consume as little as 25 mW/channel.

Octal Ultrasound Receiver ICs consume as little as 25 mW/channel.

Offering full time-gain-control path, ADC, and I/Q demodulator within 10 x 10 mm BGA package, 8-channel AD9278 and AD9279 are pin- and package-compatible with each other and provide output-referred large-signal SNR up to 67 dB. Model AD9278 suits portable ultrasound systems and AD9279 serves high-end and mid-range systems; both ICs offer 45 dB variable gain range, fully differential signal path,...

Read More »
Cherwell Further Enhances Microbiological Safety at BPL

Cherwell Further Enhances Microbiological Safety at BPL

Microbial air monitoring success in Grade A filling environment for plasma products Bicester, UK, 1st November 2010: Following the previous successful installation of bespoke remote SAS microbial air samplers from Cherwell Laboratories, UK-based manufacturer of aseptically filled blood plasma products and part of NHSBT, Bio Products Laboratory (BPL) has now installed additional SAS samplers on a...

Read More »
Cherwell Further Enhances Microbiological Safety at BPL

Cherwell Further Enhances Microbiological Safety at BPL

Microbial air monitoring success in Grade A filling environment for plasma products Bicester, UK, 1st November 2010: Following the previous successful installation of bespoke remote SAS microbial air samplers from Cherwell Laboratories, UK-based manufacturer of aseptically filled blood plasma products and part of NHSBT, Bio Products Laboratory (BPL) has now installed additional SAS samplers on a...

Read More »
Newly Redesigned Shand & Jurs 94270 Tank Blanketing Valve

Newly Redesigned Shand & Jurs 94270 Tank Blanketing Valve

Hillside, IL - Shand & Jurs is proud to announce improvements to its hugely successful 94270 Tank Blanketing Valve. The 94270 Tank Blanketing Valve now incorporates a new internal Teflon® O-ring coating which improves the performance of the unit and reduces maintenance time and costs. This new Teflon® coating is now part of Shand & Jurs' standard offering for our -½ inch, one inch and two inch...

Read More »

PRAB/Monlan Becomes PRAB Fluid Filt Ration Solutions

The diverse fluid filtration and recycling solutions for machining applications previously marketed and sold under the PRAB/Monlan name are now under the PRAB brand. For more than half a century, the PRAB name has been synonymous with increased productivity, profitability, safety and environmental compliance related to metal scrap management, said Ned Thompson, President and CEO of PRAB, Inc....

Read More »

All Topics