Fluid & Gas Flow Equipment

Metal Thread Inserts fit wood and composition board.

Metal Thread Inserts fit wood and composition board.

Three metal thread inserts install without need for special tools. Knife thread inserts, available with coarse and fine internal threads, furnish holding power in hard woods such as oak, maple, and mahogany. Finsert thread inserts provide strong metal threads in softer materials, and prevent splintering, splitting, and thread pullout. Hex Drive thread inserts are for soft materials such as pine,...

Read More »
Cord Fittings protect against liquids.

Cord Fittings protect against liquids.

UL-listed Liquid Tight Fittings, with metric hubs, provide 35 lb of strain relief to cords, protecting from forces of push, pull, and flex. They provide IP 68 liquid-tight protection and include locknuts to secure fittings to chassis. Flexible pigtail extender prevents sharp bends and extends cable life. Straight-thru, pigtail, and right-angle styles are available. Sizes are M12, M16, M20, M25...

Read More »
EMT Fittings eliminate need for bending machine.

EMT Fittings eliminate need for bending machine.

Flexible, strip-steel Flexel fittings, with zinc-plated steel ends, connect lengths of EMT together, and to panel boards and junction boxes. Hand-bendable fittings accommodate straight tubing, full 90 degree bend, and any position in between, including compound and offset configurations. Although rigid enough to maintain shape when installed, fittings isolate equipment vibration. Sizes are 1 1/4...

Read More »
Pump supplies significant power in compact arrangement.

Pump supplies significant power in compact arrangement.

Compressed air-operated, reciprocating P923 Series supplies 1 1/2 gpm flow and 3,000 psi pressure directly to D03 manifold through 2-bolt interface. Compact size of finished power unit reduces required plant floor space, number of components, and number of leakage points. Combined pumps supply power on demand, useful in clamping and work-holding circuits, where high pressure is maintained for...

Read More »
Telescopic Cylinders are available in up to 4 stages.

Telescopic Cylinders are available in up to 4 stages.

Mini-Space-® telescopic cylinders use less space than conventional, rodless or cable cylinders. Retracted length is fraction of extended length, and both ports are on rod end allowing use where other cylinders do not fit. Two stage unit extends to 59 in. and when closed occupies 23 in. It has 36 in. of stroke and is made to operate on air or hydraulic fluid. Different mounting styles are...

Read More »
Slide incorporates ball-bearing system.

Slide incorporates ball-bearing system.

Magnetically-coupled High Load Ultran Slide provides high-load carrying capability within Ultran Slide rodless cylinder. Bore sizes are 1 1/16, 1 1/4 and 1 1/2 in. Prelubricated unit provides maintenance-free, leak-free travel. Transition Plates couple rodless cylinders to Linear Thrusters to create multi-axis configurations. Options include stroke adjustment, bumpers, seals for low-pressure...

Read More »
Magnetic Drive Pump has inert flow path and long life.

Magnetic Drive Pump has inert flow path and long life.

Model NH-PX brushless dc pump series has all inert pump housing and impeller, ceramic shaft and bearings, and wetted materials of glass filled polypropylene, PVDF, or ETFE. Pump offers life expectancy in excess of 10,000 maintenance-free hours. Maximum free flow is 30 lpm and maximum head pressure is 16 ft of water. Applications include plating tanks, temperature recirculators, ultrapure water...

Read More »
Feedthrough Actuator provides motion control in vacuum.

Feedthrough Actuator provides motion control in vacuum.

Chamberlink, single-unit combination feedthrough and servo actuator, allows output shaft to operate in vacuum without shaft seals, preventing leaks. It is available in sizes 10, 14, and 32, with output torques from 10 to 300 in.-lb and output speeds of 10 to 50 rpm. Actuator is rated for vacuum levels of 10E-8 Torr.

Read More »
Valve Manifold supports DeviceNet interface.

Valve Manifold supports DeviceNet interface.

Direct Link Compact Performance Valve Manifold provides for 8 valve positions and is available in 10, 14 and 18mm port sizes. Voltage range of 11 to 28 Vdc is supported. Manifold can be populated with single or double solenoid 5/2- or double solenoid 5/3-way, and dual 3/2-way (normally open) or dual 3/2-way (normally closed), or combination of dual configurations. Type 10 manifold meets IP 65...

Read More »

All Topics