Fluid & Gas Flow Equipment

2-Way Poppet Valves feature bubble tight shut-off.
Valves

2-Way Poppet Valves feature bubble tight shut-off.

SV72 Series 2-way inert balanced-poppet solenoid valves are designed to control corrosive fluids by isolating metal components from operating media. They employ two rolling diaphragms that act as isolating barriers and balancing areas. SV72 valves feature bubble tight shut-off and are mountable in any position. They offer pressure ratings of 100 psi with a Cv of 4.0. Valves are available with 115...

Read More »
Purifiers

Isolation Systems protect against airborne contaminants.

AirShelter(TM) Isolation Systems use HEPA-filtered air to create contained, positive-pressure environments. Their main component is American Air Filter's AstroCel® II HEPA filter. The combination of positive pressure ventilation(PPV) and HEPA filtration provides filtration levels greater than 99.97% on 1 to 5 micron particles. AirShelter line includes ceiling and floor-mounted HEPA...

Read More »
Miniature Pneumatic Valve System has manual overrides.
Valves

Miniature Pneumatic Valve System has manual overrides.

Moduflex(TM) Miniature Pneumatic Valve System can be assembled in dual 3/2, 4/2 and 4/3 configurations in one island to meet application requirements (10 mm to 100 mm actuator bore sizes). Tie-rod connections are used to add or delete valves, as well as change valve function, tubing size or piloting. Moduflex Valve System consists of 2 valve sizes: 0.38 Cv and 1.13 Cv. Both have 2.5 mm stroke, 14...

Read More »
Understanding Water Hammer
Sponsored

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

Read More »
Control Valves are used with air, intert gas or vacuum.
Valves

Control Valves are used with air, intert gas or vacuum.

MicroKing 4-Way Air Control Valves are direct acting units designed to control actuators, pilot other valves, and for blow off and dispensing applications. They are available as inline or subbase versions offering M5 or 1/8 in. ports with flow of 0.18 Cv and 4.8 W solenoid. Valves feature built-in flow controls and choice of IEM or Subbase Bar manifolds with side or bottom porting, as well as...

Read More »
Soft Start Valves allow flow rates to 8.1 Cv.
Valves

Soft Start Valves allow flow rates to 8.1 Cv.

PHS Series Solenoid Quick Dump Valves, available in 3/8 in. and 1/2 in. body sizes with flow rates up to 5.7 Cv, shut off incoming pressure while exhausting downstream pressure when solenoid is de-energized. PHSSA Series Auto Pilot Soft Start Valves, available in 3/8 in. body size with 1/4 in., 3/8 in., and 1/2 in. NPT ports, and flow rates up to 3.8 Cv, allow gradual filling of downstream...

Read More »
Polymeric Membranes filter caustic and acidic chemicals.
Membranes

Polymeric Membranes filter caustic and acidic chemicals.

Polymeric PCI tubular membranes incorporate proprietary polymeric substrates that allow them to withstand solutions with pH values from 1 to 14 at high processing temperatures. Caustic and acid-resistant membranes can suit filtration requirements covering nanofiltration and ultrafiltration spectrums. Resistant to solvents, membranes are used to separate one liquid into two streams: concentrate...

Read More »
Proportional Valves feature close tolerance spools.
Valves

Proportional Valves feature close tolerance spools.

DFW proportional, directional control valves can be used for reproducible control of actuator speed in rapid/slow speed profiling as well as smooth acceleration and deceleration. D1FW features flow rating to 12.5 gpm, while D3FW has flow rating to 45 gpm. Connection options include conduit boxes with wire leads, flying leads or DIN-type connectors.

Read More »
Precision Ground Insert has 3F geometry.
Inserts

Precision Ground Insert has 3F geometry.

Precision ground insert with 3F geometry for stainless steels, aluminum, high-temperature alloys and steels features periphery ground edges for accurate profiling and indexability. Additional features include light hones and positive geometry. Radii are available for light depths of cut and producing small corner radii. PVD grades offer layer of lubricity for reduced coefficient of friction....

Read More »
Hoses are ideal for half-bend radius applications.
Hose

Hoses are ideal for half-bend radius applications.

Models 351TC and 351ST abrasion-resistant hoses, designed for 1/2 SAE 100R1 minimum bend radius applications, are available with MSHA-accepted Tough Cover or Super Tough polymeric cover. Both offer 4,000 psi constant working pressure in sizes that range from 1/4 in. to 3/4 in. I.D. They are constructed of oil-resistant, Nitrile-based synthetic rubber tube, with 2 braids of high-tensile steel wire...

Read More »

All Topics