Fluid & Gas Flow Equipment

Inert Tubing meets FDA and USP Class VI criteria.
Tubes and Tubing

Inert Tubing meets FDA and USP Class VI criteria.

Tygon® Inert Tubing Formulation SE-200 contains inert FEP liner, which allows its use with aggressive chemicals. Combined with crystal clear, flexible Tygon jacket, it is suitable for applications where tight bends, clarity, and chemical resistance are required. Inert liner limits the potential of fluid contamination during transfer. Applications include pharmaceutical processing, ink and...

Read More »
Mini USB Connectors are suitable for portable devices.
Connectors

Mini USB Connectors are suitable for portable devices.

Mini A-type, B-type USB connectors are intended for use in host and peripheral devices, respectively. AB-type allows for both A- and B-type cables to be inserted, and can be used in devices with host and peripheral capabilities. All mini-USB types are fully shielded and feature indentations for grounding and mating retention. Insulator material is made from PA6T thermoplastic, and contacts have...

Read More »
Butterfly Valves suit HVAC and industrial applications.
Valves

Butterfly Valves suit HVAC and industrial applications.

Series 125WB/LB Butterfly Valves are available in 2 through 48 in. sizes with wafer or lug body design. With 200 psig pressure rating (2 to 12 in. sizes) and 150 psig pressure rating (14 to 48 in. sizes), valves are suitable for applications wherever positive shut-off is required for liquids, gases, or slurries. Constructed with cast iron bodies and stainless steel shafts, valves are designed for...

Read More »
Ball Valve features 3 or 4 way body port configuration.
Valves

Ball Valve features 3 or 4 way body port configuration.

3L/T2Q33 Series is suitable for diverting, blending, or mixing applications. It is available in carbon or stainless steel in sizes from 3/8 to 1 1/2 in. Heavy-duty center section can be furnished with bolted-on screwed ends for valve rated to Class 400; with flanged ends for either Class 150 or Class 300 valve; or with bolted-on socket or butt weld ends. All body gaskets are PTFE, and it has 4...

Read More »
Steam Trap suits low pressure radiator applications.
Steam Traps

Steam Trap suits low pressure radiator applications.

GCR07 thermostatic capsule steam trap features brass body with stainless steel internals. It is designed for pressures up to 230 psi and temperatures up to 390 deg F. Maximum operating pressure is 145 psi, and maximum differential pressure is 100 psi. Sizes range from 3/8 to 3/4 in. with NPT end connections.

Read More »
Air Knife/Nozzle System offers fully adjustable speed.
Machine Knives

Air Knife/Nozzle System offers fully adjustable speed.

Sonic XE Air Knife or Air Nozzle System incorporates Rotary Air Coupling to allow air transfer from stationary supply piping to rotating air knife or nozzle assembly with no blower pressure loss. Rotation is infinitely adjustable from 10 to 200 rpm by setting thrust jet valves on main body, allowing multiple passes over product. Non-lubricated assembly ensures clean and dry air delivery....

Read More »
Gear Pump features positive displacement design.
Pumps

Gear Pump features positive displacement design.

Fully-Jacketed internal gear pump comes in 11 sizes from 15 to 1,100 gpm, at pressures to 230 psi. It provides jacketing around perimeter of rotor case, inlet and discharge throats, and on many sizes, throughout flange areas. With stainless steel, steel, ductile iron, and cast iron material options, pump handles variety of fluids, withstanding temperatures to 800 deg F and viscosities to...

Read More »
Die Holder fits stacked tooling sets.
Tool Holders

Die Holder fits stacked tooling sets.

Available for any size or brand of rotary bender with stacked tooling for 2 to 3 sets of tools, Model TFB wiper device is easily adjusted to properly fit different radius bend dies. Each wiper die can be adjusted to locate wiper with correct amount of angle in relation to tube or rake. Wiper die support helps prevent tube wrinkling and prolongs life of dies. Automatic lubrication to each wiper is...

Read More »
Primer-Free Threaded Inserts resist galvanic corrosion.
Inserts

Primer-Free Threaded Inserts resist galvanic corrosion.

Stainless steel Heli-Coil inserts, manufactured to military and metric aerospace standards, eliminate need for applying zinc chromate primer. Resin-bonded, fluoropolymer coating creates barrier between insert and parent material. Coating also provides additional lubricity, easing installation in anodized and chemically treated holes and allowing for consistent prevailing torque with screw-lock...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers