Fluid & Gas Flow Equipment

Valves

Angle Valve handles liquids, gases, and steam.

ARES pneumatically actuated on/off valve works in maximum pressure of 232 psig for most media and 150 psig in steam applications. It is available with clamp, NPT, and weld end connections from 3/8 to 2 in. Actuator has NAMUR style mounting pad, visual position indicator, and is available in spring-to-close, spring-to-open, and double acting configurations. Accessories include limit switches,...

Read More »
Manifolds offer fully automatic operation.
Manifolds

Manifolds offer fully automatic operation.

VM 1000 Series is designed for use with liquid cylinders, while VM 2000 Series is used with high-pressure cylinders. Both give uninterrupted supply of gas as primary bank of cylinders is depleted. At preset pressure, switchover unit automatically switches to reserve bank. VM manifolds operate on 115 Vac power, but will continue to function during power failure. They meet or exceed NFPA system and...

Read More »
Steam Trap suits high capacity applications.
Steam Traps

Steam Trap suits high capacity applications.

MAX-FLO Super High Capacity Float and Thermostatic Steam Trap resists water hammer and corrosion, and is suitable for heat exchangers, reboilers, and air heating coils. It is available in pressures to 175 PSIG, temperatures to 377°F and capacities to 60,000 lbs/hr with stainless steel internals and cast iron body and cover. Seat positioned below condensate level provides condensate removal...

Read More »
Connectors eliminate need for rigid line.
Connectors

Connectors eliminate need for rigid line.

EIA connectors, suitable for flexible braided cable, simplify routing. Available as straight and right angle plugs, receptacles, and adapters in 7/8 and 1 5/8 in. line sizes, they suit high power applications up to 10,000 W. Construction features silver-plated beryllium-copper inner conductors; Teflon® dielectrics; and brass and nickel or silver-plated bodies. They provide 50 ohm impedance...

Read More »
Centrifugal Pump is offered in 316 stainless steel.
Pumps

Centrifugal Pump is offered in 316 stainless steel.

Flomax 8 self-priming pump with viton seals offers corrosion resistance and chemical compatibility with difficult fluids. Capable of delivering head pressures up to 100 ft and flow rates to 160 gpm, it provides max suction lifts of 25 ft. Available in kit form, Flomax 8 pumps can be mixed and matched with different motors. Pump pack options include pedestal, engine or motor mounted models, and...

Read More »
Nozzles and Tips do not require tools for installation.
Nozzles

Nozzles and Tips do not require tools for installation.

K-Ball® adjustable clip-on spray nozzles swivel to re-direct and adjust spray. It clips to pre-drilled pipe, while Finger system holds ball securely in alignment when cap is tightened. Spring clamp can withstand pressures up to 100 psi at 175°F. Nozzles are available with various spray patterns, flow rates, and spray angles. Zip-Tip® quick disconnect tips, used with K-Ball...

Read More »
Solenoid Valves available for air, water, and fluids.
Valves

Solenoid Valves available for air, water, and fluids.

Devices are available with 2- and 3-way functions, normally open or normally closed design, and NBR, EPDM, FKM, and PTFE seals. Valves work in pressures from 0 to 300 psig and temperatures up to 280°F. Valves are available in brass and 316 stainless steel in sizes from 1/8 TO 2 in. NPT. Selector adjustment available to control closing speed.

Read More »
IDE/Compact Flash Adapter allows through-panel mounting.
Connectors

IDE/Compact Flash Adapter allows through-panel mounting.

CFADPT-HD IDE to dual compact flash adapter allows connecting 2 compact flash cards to any system having IDE port. Designed for embedded systems, it has both 40 pin .1 in. and 44 pin 2 mm IDE connectors. Both hard disk style and floppy style power connectors are available for supplying power to CFADPT-HD when 40 pin IDE cables are used. Power is provided by IDE cable when 44 pin cable is used.

Read More »
Filter Assembly protects laser gas supply.
Fluid Filters

Filter Assembly protects laser gas supply.

Series 580-6001 provides 2.0 micron filtration and is suitable for all laser systems using helium, nitrogen, carbon dioxide, and/or premixed resonator gases. Assembly, with stainless steel body, connects directly to gas inlet on laser. It includes stainless steel compression-tube fittings, stainless steel filter element, and shut-off valves. Filter element can be replaced by removing locking cap...

Read More »
Inert Tubing resists chemicals.
Tubes and Tubing

Inert Tubing resists chemicals.

Tygon® Formulation SE-200 contains inert FEP liner which allows use with aggressive chemicals. It has crystal clear, flexible jacket, making it suitable for applications where tight bends, clarity, and chemical resistance are required. Typical applications include pharmaceutical processing, ink and toner lines, beverage dispensing, and high purity fluid and corrosive chemical transfer. It...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers