Fluid & Gas Flow Equipment

Compressors

Piston Compressors offer one-piece heads.

Series 2660 WOB-L® piston compressors' one-piece cast aluminum head design eliminates leakage and reduces sound levels. Features include nine-blade fans and high performance piston seals. Pressure is rated to 160 psi (max), maximum vacuum is rated to 29.2 in. Hg, and free flow is rated to 5.60 cfm (max). Series suits medical equipment and industrial applications.

Read More »
Plasma-Cutter Filter has no dampers or moving parts.
Air Filters

Plasma-Cutter Filter has no dampers or moving parts.

Plasma Cutter Filter System removes smoke and dust from cutting area directly. Zipper-duct design allows filter head to move with cutter head, pulling polluted air away from cutter. Fan may be located inside or outside plant. Complete air system is available with or without plasma cutting table, and is prefabricated for installation with existing cutters. It requires power source of only 5 hp.

Read More »
Cutting Inserts improve efficiency and productivity.
Inserts

Cutting Inserts improve efficiency and productivity.

Aluminum Cutting Inserts are available in WCGT 05 and WCGT 06 sizes to mount into existing OTM HOLESHOT(TM) and HOLESHOT(TM)-IS (Integral Shank) drills. Available in grade 12, inserts feature highly polished surfaces and up-sharp geometry for drilling aluminum. Their polished surfaces reduce coefficient of friction for drilling in soft, gummy material.

Read More »
Bypass Relief Valves feature Teflon® construction.
Valves

Bypass Relief Valves feature Teflon® construction.

Series RVT angle pattern relief valves have Teflon® shaft and body for use with corrosive and ultra-pure liquids, and for elimination of sticking and surging. Pipe sizes range from 1/4 to 2 in. with various seal materials including Buna-N, Viton, and EPDM. Flow rates range from 2 gpm, and set pressures range from 5 to 150 psi. Valves relieve excess pressure in piping systems, as well as...

Read More »
Cartridge Valves offer high flow capabilities.
Valves

Cartridge Valves offer high flow capabilities.

DSHR two-way poppet and sleeve and SE 3 three-way spool and bushing servocartridge valves provide closed-loop control. Both have servopilot valve with feedback device on mainstage. DSHR has flow rates up to 165 gpm @ 72.5 psi pressure drop, 12 ms step response time at 100% stroke, and is available in sizes NG 40, 50, 63, and 80. SE 3 has frequency response of 170 Hz at -3 dB and 12 ms step...

Read More »
Bellows Covers resist chemicals and UV.
Bellows

Bellows Covers resist chemicals and UV.

Available in round and rectangular shapes in open-ended or closed form, LFP(TM) Bellows and Way Covers are made with flexible, multilayered PTFE material. Heat-sealed covers have no stitching, maintain zero-porosity even after severe flexing, resist chemical attack and ultraviolet exposure, and are rated for 500°F. Covers can incorporate numerous types of end attachments, and are available...

Read More »
Adhesive Dispense Valve makes precise deposits.
Valves

Adhesive Dispense Valve makes precise deposits.

Compact MicroDot(TM) 741MD-SS needle valve makes microdeposits as small as 0.007 in. dia. Internal needle seats in hub of dispensing tip reduces amount of dead fluid between needle seat and substrate. Pneumatically operated valve applies variety of assembly fluids including UV-cure adhesives, solvents, lubricants, and epoxies. Calibration knob allows user to restore valve stroke setting and...

Read More »
Instrumentation Fittings handle high pressures.
Fittings

Instrumentation Fittings handle high pressures.

MPI(TM) connectors operate at pressures of 6,000 to 15,000 psi, making them suitable for equipment used to operate feed lines, processing lines, and other systems within industrial labs. Four-part fittings can be used on 316 stainless-steel, cold-drawn, 1/8 hard, unannealed tubing or thick-walled, annealed, instrumentation-grade 316 tubing, and are available for tubing ranging from 1/4 to 1 in....

Read More »
Simplex Strainer offers many design options.
Strainers

Simplex Strainer offers many design options.

Model 90 fabricated simplex basket strainer is customizable to exact application requirements to remove dirt and debris from pipelines. Sizes from 1 to 48 in. and larger are available with ASME Code Stamp. Slant top design facilitates flow through strainer and can be removed by one person. Users can choose from carbon or stainless steel construction; hinged, bolted, or quick opening covers; and...

Read More »
Linear-Rail Bellows are thermally sealed.
Bellows

Linear-Rail Bellows are thermally sealed.

Thermally Sealed Linear Rail Bellows offer liquid and dust proof materials and profiled PVC stiffeners in every fold. They install with snap on fit and Velcro fasteners. Thermally Sealed & Stitched Bellows offer seamless design for both liquid and particle protection. PVC frame is permanently attached into each fold. Stitched Style Bellow comes in round and rectangular form. Armadillo Bellows are...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers