New Mechanical Components and Assemblies Products

Hydraulic Cylinder has cylinder differential tie rod.

Featuring leak-free fluid connection ports, CDT1 Series NFPA hydraulic cylinder incorporates removable rod bearing, sealing system, and secured air bleed. With nominal pressure of 1,500 psi, bore diameter from 1-8 in., and piston rod diameter from Ã-½-5Ã-½ in., product accommodates fluid temperature range of -4 to +176Ã-

Magnetically Driven Pumps offer dry-run bearings.

Silicon carbide (SiC-D) bearings, available in MagnatexÃ-® MP, MMP, MPT, and MPH pumps, have surface treatment that reduces friction coefficient and diminishes harmful effect of heat shock during dry-run conditions and start-ups. Chemical-resistant products operate in dry-run condition for 105 min with no cracks or breaks and show no signs of heat-shock damage after operating for 1 hr under...

Manual Dispensing System is offered with 75 ml capacity.

MIXPACÃ-® Hand-Held Cartridge Dispensing System consists of manual or pneumatic dispensing gun and static mixer that dispenses 2-component adhesives in 1:1 volumetric ratio. Molded of polypropylene, 75 ml cartridges utilize twist-and-lock static mixers and allow users of MIXPAC System 50 to dispense greater volumes without requiring new gun.

Oldham Couplings operate with zero backlash.

Featuring balanced design for reduced vibration, Paradrive oldham couplings are comprised of 2 hubs and acetal or nylon floating center disk. Torque transmission is accomplished by mating slots in center disk with drive tenons on hubs; slots fit with slight press. Disks are electrically isolating and can act as mechanical fuses. Couplings are offered in 7 sizes of set screw or Nomar clamp style...

Quick Release & Spring Loaded Pins - Fast, Convenient and Secure

To learn more about the different types of pins available or which ones to select for your specific application, download our product guide.

Heat Shrink Tubing offers strain relief.

Extra Heavy-Duty Heat Shrink Tubing protects connections against moisture, contamination, abrasion, and corrosion. Providing 3:1 shrink ratio, thick adhesive inner wall melts to completely seal connection. Flame-retardant heavy wall meets MIL Spec 23053/15 Class I requirements.

Diaphragm Seal meets NACE MR0103-2003 standards.

With 2-piece construction, No. 70 Diaphragm Seal - NACE MR0175-2003 features 316 stainless steel housing and welded diaphragm. Connection for upper housing is Ã-¼ and Ã-½ in. NPT, while lower housing is Ã-¼, Ã-½, Ã-¾, and 1 in. NPT, with flushing available. Uses include any oil and gas refinery applications requiring NACE-compliant MR0103-2003 diaphragm seal.

Pulsation Dampener suits high-pressure applications.

Designed for heavy-duty applications with pressures up to 4,000 psi, SENTRY XP is constructed to 4:1 max allowable working pressure safety margin. Shell construction is available in 8-24 in.Ã-³ volumes, machined from solid rod of 316L or plated carbon steel. Unit features 2.75 in. thick plug top held in place by two 30,000 psi retaining rings. Bladders are available in Buna-N, EPDM, and...

Fixed Cord PDUs facilitate cable management and airflow.

HP Fixed Cord Extension Bars and Fixed Cord PDUs (power distribution units) aid in managing cable clutter in back of rack and improve airflow throughout the enclosure. Made for 1U fixed rail servers, output cords are fixed to PDU extension bar to reduce chances of accidental disconnection. Each output cord is 13 in. long, and there are 7 output cords per extension bar. Fixed cord PDU kits provide...

Insert Couplings replace standard bellow couplings.

Suited for CNC machines and digital drives, Series ADS-Servo Insert Couplings offer high torsional stiffness, yet still allow vibration dampening. They cover torque requirements between 89-5,895 lb-in. with bore sizes ranging from Ã-¼-2Ã-½ in. High-speed balancing for spindle applications is available on all coupling sizes.

Collet Closers hold parts up to 6 in. diameter.

Pull-back style collet closers, with A2-5 spindle nose, accept 16C collets up to 1 5/8 in., 16C step chucks up to 6 in. diameter, and expanding nose 16C collets for ID holding. Operating at maximum of 150 psi air or 400 psi hydraulic, drawtube force is 22.5 x line pressure, yielding theoretical clamping force of 5,062 lb on air and 13,750 lb on hydraulic at maximum drawtube force.

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.