
New Laser Tube Has a Lifetime of 45,000 Hours
Available in either 80 or 100 Watts of Rated Optical Power. Compatible with Spirit/Spirit LS/Spirit GLS/Spirit GLS Hybrid machines. Input Power of 1224 Watts or 1220 Watts.
Read More »Peco-Inspx Announces Industry Leading Parts Warranties for X-Ray Systems
Parts Warranties for X-Ray Tubes and Power Supplies Start When Those Parts Are Installed. San Carlos, CALIF. (PRWeb) December 31, 2018 -- X-Ray tubes and their associated high voltage power supplies are two of the most critical parts in any X-Ray machine. They are also the most costly. Historically, customers have preferred not to stock these parts out of concern that they will go out of...
Read More »
Single Wall Halogen-free Heat Shrink Tubing Products meets UL VW-1 flammability test.
Suitable for confined-space applications requiring air quality, Single Wall Heat Shrink Tubing products come in X2 and X4 versions. Products shrink at a 2:1 ratio and install quickly at full-recovery temperature of 90 degree C. Used in operating temperatures from -30 C to 125 C. X2 products are offered in 1.0 to 30 mm in 17 sizes. X4 products come in 0.8 to 25 mm range in 13 sizes.
Read More »Things You Should Know Before Buying a Laser Engraver
GCC, a global forefront equipment-manufacturing provider in the visual communication industry, is glad to share this article written by our Belarus distributor to help customers know more about laser engravers. In this article, we will provide a brief overview of the Chinese laser cutting machines’ main technical characteristics and make a comparative analysis with GCC laser engravers (Taiwan)....
Read More »
The Ultimate Guide To PCB Hardware
This guide will help you understand the different components that can enhance the performance of your printed circuit board design.
Read More »
Scienscope to Launch New X-ray Component Counter at APEX
Chino, CA - Scienscope International, a complete inspection solutions provider, will exhibit in Booth #1038 at the 2016 IPC APEX EXPO, scheduled to take place March 15-17, 2016 at the Las Vegas Convention Center. Scienscope will launch their new AXI5100c X-ray Component Counter for the first time and showcase some of its flagship AXI products: X-SCOPE 1800, X-SCOPE 6000 and AXI-8000. The AXI5100c...
Read More »
PNC Purchases Real time X-Ray Inspection System - The Jewel Box 70T from Glenbrook Technologies
Nutley, NJ: Sam Sangani, President and owner of PNC has announced that his company recently acquired a new X-Ray inspection system, the Jewel Box 70T from Glenbrook Technologies. This system has an 80KV micron focal spot x ray tube for up to 500X geometric and 1,200X electronic magnification. It allows x-y-z movement rotation and tilt with joy stick positioning. It can accommodate a 16 x18 inch...
Read More »Pitot Static Tube Kit installs on B-N aircraft.
Installed- on Britten Norman Group Ltd. aircraft, EH130-Kit Pitot Static Tube Kit is designed to measure aircraft airspeed and provide static source for altimeter and vertical speed. Kit is eligible for installation on B-N Islander on underside of wing bulkhead fitting and Pitot Head Support Assembly.
Read More »
Burn Hazard with Ballast-Compatible LED Tube
A major US lighting manufacture recently announced a recall of 700,000 ballast-compatible LED tube due to potential burn hazard by arcing. (Search LED T8 recall on Internet for more information.) The recall was for arching that was occurring inside the ballast-compatible tube, that is, an internal arcing. This issue can be resolved by modifying the tube design. However, this falls short to...
Read More »Jacket Compounds come in flame retardant, low-shrinkage grades.
Halguard-® 58610 and 58615 are 53 Shore D compounds that have UL-94 vertical burn ratings of V-0 for 1/16 in. thick specimens and respective oxygen indices of 52% and 45%. Both enable passing of UL-1685 FT-4 and UL-1666 riser flame tests. Also available, Halguard 58620 provides low level of post-extrusion shrinkage suited for fiber optic cable applications. This 54 Shore D compound enables...
Read More »Zecotek Receives Patent from Japanese Patent Office for Its MAPD Silicon Photomultiplier
SINGAPORE –- Zecotek Photonics Inc. (TSX-V: ZMS; Frankfurt: W1I), a developer of leading-edge photonics technologies for medical, industrial and scientific markets, today announced that the Japanese Patent Office has issued a patent for its Micro-channel Avalanche Photodiode (MAPD) silicon photomultiplier. The Company continues to secure important intellectual property related to key elements...
Read More »
Industry Leading OEM with over 65 Years of Experience
Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.
Read More »