Machine Bars

Steadyline Turning/Boring Bars feature vibration dampening system.
Machine Bars

Steadyline Turning/Boring Bars feature vibration dampening system.

Turning/Boring Bars are available in 2.36 in. and 3.15 in. diameter sizes. Suitable for oil and gas applications, units feature a BA connection. Products come with BA adapter which is used to mount GL50 turning heads. Steadyline® is offered in 6xD, 8xD and 10xD bar sizes and in Seco-Capto™ C6, C8 and HSK-T types. Turning bars are equipped with coolant supply channels and boring heads.

Read More »
G1221-P Monoblock Boring Bar features UF8 chip geometry.
Machine Bars

G1221-P Monoblock Boring Bar features UF8 chip geometry.

G1221-P Monoblock Boring Bar features two coolant holes and is designed for recessing and internal grooving. Product is suitable for internal grooves from Dmin = 0.63 in. and for grooving up to depths of 0.39 in. in all ISO material groups. Boring bar is compatible with GX09 and GX16 inserts and insert widths ranging from 0.062 to 0.125 in. G1221-P can be used in normal and overhead position....

Read More »
Milling Chuck and Boring Bars eliminate vibration.
Machine Bars

Milling Chuck and Boring Bars eliminate vibration.

HMC Series Milling Chuck and Smart Damper Boring Bars maintain efficient cutting speed. Featuring clamping bore with fine slots, Milling Chuck uses 12mm diameter cutter and support heavy-duty and finish end milling tasks. Designed with insert holders with 1.58 in. diameter, boring bar’s metric bodies are available in 32 and 40mm diameters. Suitable for lathe applications, bar is designed with...

Read More »
Asymmetric Line-Boring Bar increases process speeds, bore quality.
Machine Bars

Asymmetric Line-Boring Bar increases process speeds, bore quality.

Asymmetric line-boring bar has supports on rotated guide pad that provide freedom to enter and exit guide part, even when passing through raw bores, while geometry allows feeding bar through raw bores on eccentric path. Such boring offers support on both ends of tool without- necessitating expensive lift functions, obstructive counter bearings, or critical mechanisms inside tool. Also, complete...

Read More »
Seco Brings Comprehensive Cutting Tool Innovations to TECMA 2015
Machine Bars

Seco Brings Comprehensive Cutting Tool Innovations to TECMA 2015

TROY, Mich. — At TECMA 2015, Seco Tools, LLC will showcase numerous cutting tool innovations that bring enhanced productivity and value to a variety of metalworking operations. Visitors to Seco stand 848 at the Expo Bancomer Santa Fé in Mexico City, March 3-6 will discover several new milling cutters, as well as the latest turning and threading solutions.-  Square Shoulder Milling At the...

Read More »
Advanced Machine & Engineering Co. to Feature Products at IMTS 2014
Machine Bars

Advanced Machine & Engineering Co. to Feature Products at IMTS 2014

Advanced Machine & Engineering Co. (AME) will be exhibiting their machine tool component products in both the East and West buildings this year at IMTS 2014. In the West building, at booth W-2405, they will be showing their fixturing product lines under the Amrok brand name, which consists of the following products: • Amrok Epoxy-mineral Tombstones • Amrok Cast Iron Tombstones • Triag...

Read More »
Fine-Boring System achieves closed-loop operation.
Machine Bars

Fine-Boring System achieves closed-loop operation.

Allowing users to dial in tolerances while tool is mounted in machine tool, Romicron® systems produce high-accuracy holes at high RPMs. Users can produce finish bores with tolerances of- few microns in diameter and bore-to-bore variations of few tenths of one micron. Using cartridges or boring bars, every tool can be adjusted in diameter via dial ring in 2 micron increments to achieve...

Read More »
Frame-Gripper Clamps from P-F Combine Versatility with Value
Machine Bars

Frame-Gripper Clamps from P-F Combine Versatility with Value

WEST BOYLSTON, MA- -- Porter-Ferguson Bite-Tite™ Frame Gripper clamps and draw bar assemblies bring great versatility to any autobody repair operation by letting the repair tech build exactly the right tool set for any job. The CL0390 is a 5 ton clamp assembly and the CL1390 is a 6 ton assembly. Both are available individually and as a one-or two-clamp draw bar assembly. Draw bars are also...

Read More »
Machine Bars

Small Diameter Boring System operates at up to 15,000 rpm.

Offered in inch and metric graduations, Small Diameter Boring System bores diameters ranging from .078-1.890 in. and can be adjusted up to .0001 in. on diameter. Through-hole in receiver allows boring bar to be telescoped for maximum rigidity under demanding cutting conditions. All boring bars and noses offer coolant-through capability and are balanced by design. To eliminate setting errors,...

Read More »
Machine Bars

Valenite Unveils Multiple Technologies at IMTS 2008

New products and services can help increase productivity by 20 percent or more MADISON HEIGHTS, Mich., July 16, 2008 - Valenite LLC, a global manufacturer of cutting tools and tooling systems for the metalworking industry, will introduce several first-to-market innovations at its IMTS 2008 exhibit (booth # F2979) on September 8 - 13, 2008. This launch will specifically highlight exclusive carbide...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics