Mechanical Components and Assemblies

Stem Casters have molded-in bearing.

Stem Casters have molded-in bearing.

Suited for pushcarts, workstations, flow racks, and other structures requiring mobility in non-tugging applications, CSC series includes swivel, swivel-with-stop, and fixed styles. They are sized for installation into end of 28 mm pipe sections and are made of polyurethane. Available in sizes of approximately 2, 3, and 4 in dia., products provide 75, 225, and 275 lb load bearing capacity per...

Read More »
Expansion Joint features Victaulic-® grooved ends.

Expansion Joint features Victaulic-® grooved ends.

RedflexÂ-® J-1W-G wide-arch expansion joint alleviates extreme expansion and compression stresses without double or triple arches. Sizes range from 1-12 in. with working pressures from 165-140 psi, depending on size. Control rods to prevent over expansion are available if required. Materials of construction include pure gum rubber, Neoprene, HypalonÂ-®, chlorobutyl, Buna-N, EPDM, and...

Read More »
Overhead Crane Stop does not slide on impact.

Overhead Crane Stop does not slide on impact.

Non-Slide Crane Stop is used where conventional crane stop attaching plates interfere with rail hook bolts. Dogs clamp upright wedge to rail and barely drop beneath head of rail for maximum clearance. Upright wedge is available in either straight-edged style for bumper contact, or in curved form to accept particular crane wheel diameter. Crane Stop is suited for cranes traveling at normal...

Read More »
Measuring Wheel facilitates indoor-distance estimating.

Measuring Wheel facilitates indoor-distance estimating.

Series ML6, with center-mounted, adjustable handle and 1.6 in. wide, 2.0 in. dia wheel, is suited for measuring on hard, smooth surfaces. Transparent ABS body is available in clear as well as 5 colors. Fully extended, product has overall length of 39.5 in. When fully retracted, overall length is 17.75 in. Unit incorporates built-in wheel scraper and 5-digit counter with magnifying lens. Imperial...

Read More »
Ball Bearing Sets accommodate thrust in either direction.

Ball Bearing Sets accommodate thrust in either direction.

MRCÂ-® Series 97000 angular contact, split inner ring ball bearings sets include 97000U2 Series with 29Â-º contact angle and 97000UP2 Series with 40Â-º contact angle. Configuration allows thrust capacity to be shared by 2 bearings in 1 direction and by 1 bearing in reverse direction. Available in metric bore sizes of 65-150 mm, units are engineered to ABEC-1 tolerances; feature...

Read More »
Double-Cam Levers are offered in steel and stainless steel.

Double-Cam Levers are offered in steel and stainless steel.

Steel and Stainless Steel Double Cam Levers come with black-oxide finish and oil-resistant, red, plastic handle sleeves. Levers allow repositioning and clamping using a self-securing mechanism. When used with eccentric cam, clamping force remains constant in every position. Kingpin and snap ring are stainless steel on both versions.

Read More »
Disposable Cartridges suit pneumatic and manual dispensing.

Disposable Cartridges suit pneumatic and manual dispensing.

Disposable Plastic Cartridges are offered in 6 sizes from 1-32 oz, as well as 1/10th gal, with compatible plungers, seals, flange caps, and various nozzles in 2, 4, 6, 8, and 10 in. lengths. Available in low- or high-density polyethylene, cartridges have Â-¼ in. NPT female threads with internal valve seal and minimum burst strength of 100 psi. They are suited for adhesives, epoxies,...

Read More »

Heat Shrink Tubing covers tapered and irregular objects.

Thickness of Texfluor PTFE 4:1 Heat Shrink Tubing facilitates installation over irregular shapes, fittings, and other protrusions. Product then conforms to object when heated to provide protective covering. Capable of operating continuously at up to 500-°F, tubing provides non-stick surface and resists chemicals, solvents, water, and acids. It is available in sizes from 0.078-2 in. in diameter....

Read More »

Finishing Chemicals are suited for nonwovens.

Synthebond line of polymers, resins, finishes, and fluorochemical extenders are engineered to deliver hand and color fastness, abrasion resistance, oil and water repellency, and increased strength and rigidity for nonwoven applications. Finishing chemicals feature range of binders, performance finishes, softeners, and soil release agents that optimize performance of products such as window...

Read More »

All Topics